• Journal of Korea Multimedia Society
• /
• v.17 no.10
• /
• pp.1189-1197
• /
• 2014

Recently, general purpose graphic processing units(GPUs) are being widely used in mobile embedded systems such as smart phone and tablet PCs. Because of architectural limitations of mobile GPGPUs, only a single program is allowed to occupy a GPU at a time in a non-preemptive way. As a result, it is difficult to meet performance requirements of applications such as frame rate or response time if applications running on a GPU are not scheduled properly. To tackle this difficulty, we propose to specify applications using synchronous data flow model of computation such that applications are formed with edges and nodes. Then nodes of applications are scheduled onto a GPU unlike conventional scheduling an application as a whole. This approach allows applications to share a GPU at a finer granularity, node (or task)-level, providing several benefits such as eliminating need for manually partitioning applications and better GPU utilization. Furthermore, any scheduling policy can be applied in response to the characteristics of applications.

• ETRI Journal
• /
• v.41 no.3
• /
• pp.337-347
• /
• 2019

The specific anthropomorphic mannequin (SAM) phantom was designed to provide a conservative estimation of the actual peak spatial specific absorption rate (SAR) of the electromagnetic field radiated from mobile phones. However, most researches on the SAM phantom have been based on early phone models. Therefore, we numerically analyze the SAM phantom to determine whether it is sufficiently conservative for various types of mobile phone models. The peak spatial 1- and 10-g averaged SAR values of the SAM phantom are numerically compared with those of four anatomical head models at different ages for 12 different mobile phone models (a total of 240 different configurations of mobile phones, head models, frequencies, positions, and sides of the head). The results demonstrate that the SAM phantom provides a conservative estimation of the SAR for only mobile phones with an antenna on top of the phone body and does not ensure such estimation for other types of phones, including those equipped with integrated antennas in the microphone position, which currently occupy the largest market share.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.90-97
• /
• 2019

The charge redistribution digital-to-analog converter(CR-DAC) is often used for successive approximation register analog-to-digital converter(SAR ADC) that requiring low power consumption and small circuit area. However, CR-DAC is required 2 to the power of N unit capacitors to generate reference voltage for successive approximation of the N-bit SAR ADC, and many unit capacitors occupy large circuit area and consume more power. In order to improve this problem, this paper proposes SAR ADC using series capacitor DAC. The series capacitor DAC is required 2(1+N) unit capacitors to generate reference voltage for successive approximation and charges only two capacitors of the reference generation block. Because of these structural characteristics, the SAR ADC using series capacitor DAC can reduce the power consumption and circuit area. Proposed SAR ADC was designed in CMOS 180nm process, and at 1.8V supply voltage and 500kS/s sampling rate, proposed 6-bit SAR ADC have signal-to-noise and distortion ratio(SNDR) of 36.49dB, effective number of bits(ENOB) of 5.77-bit, power consumption of 294uW.

• Computers and Concrete
• /
• v.23 no.6
• /
• pp.421-431
• /
• 2019

The alarming rate of depletion of natural stone based coarse aggregates is a cause of great concern. The coarse aggregates occupy nearly 60-70% by volume of concrete being produced. Research efforts are on to look for alternatives to stone based coarse aggregates from sustainability point of view. Response surface methodology (RSM) is adopted to study and address the effect of ferrochrome slag (FCS) replacement to coarse aggregate replacement in the ordinary Portland cement (OPC) based concretes. RSM involves three different factors (ground granulated blast furnace slag (GGBS) as binder, flyash (FA) as binder, and FCS as coarse aggregate), with three different levels (GGBS (0, 15, and 30%), FA (0, 15, and 30%) and FCS (0, 50, and 100%)). Experiments were carried out to measure the responses like, workability, density, and compressive strength of FCS based concretes. In order to optimize FCS replacement in the OPC based concretes, three different traditional optimization techniques were used (grey relational analysis (GRA), technique for order of preference by similarity (TOPSIS), and desirability function approach (DFA)). Traditional optimization techniques were accompanied with principal component analysis (PCA) to calculate the weightage of responses measured to arrive at the final ranking of replacement levels of GGBS, FA, and FCS in OPC based concretes. Hybrid combination of PCA-TOPSIS technique is found to be significant when compared to other techniques used. 30% GGBS and 50% FCS replacement in OPC based concrete was arrived at, to be optimal.

• Korean Journal of Social Welfare
• /
• v.57 no.2
• /
• pp.351-374
• /
• 2005

This study examines dynamics of poverty in Korea, focusing on poverty duration and its determinants. Data come from Korean Labor and Income Panel Study(KLIPS), 1998-2003. KLIPS is a longitudinal survey of 5,000 families and their members which are representative of urban residents in Korea. Respondents of KLIPS annually report detailed information on their income, economic activities, and other socio-economic characteristics. This study use poverty exit probabilities to generate distributions of spell lengths, following Bane and Ellwood(1986)'s methodology. This study finds a high level of poverty exit rates in Korea. About three quarters of those beginning a poverty spell exit from poverty within two years. Only 14.3 percent of all the poverty spells consist of long spells which persists five years or more. Yet, a different picture emerges when spells of the poor persons at a given time are analysed. Persistent poor occupy a considerable share of all the poor. Almost 50 percent of those who would be in poverty at a given time are in the midst of poverty spells lasting five years or more. When repeat spells of poverty are also included in the analyses, the proportion of long-term poor increases further. 63 percent of persons poor at a given time are long-termers. The majority of long-term poor are members of families headed by the aged. They show both a low level of poverty exit rates and a high level of reentry rates, and thus are most likely to experience long-term poverty. In the first place, they occupy a substantial share of all the poor. The second who are likely to be poor longer is members of families headed by non-aged women. Researchers have recentlty paid much attention to the working poor who have increased since the economic crisis in 1997. Yet, it is very likely that families headed by non-aged male who largely consist of the working poor temporarily experience poverty. Findings for this study suggest that further studies and policy proposals addressing persistent poverty are necessary.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.352-358
• /
• 1987

Rate constants for the hydrolysis of para-substituted phenyl N-(p-chlorobenzoyl)chloroformimidate (I) derivatives in 1 : 4 dioxane-water at $25^{\circ}C$ have been determined. Rate data, substituent effect $(\rho\>{\rho}^+)$, product analysis and MO calculation indicate that the uncatalyzed reaction proceeds through an $S_N1$ mechanism involving the formation of azocarbonium ion (II) below pH 3.0, and the base-catalyzed reaction proceeds through an $S_N2$ mechanism via transition state (III) above pH 4.0. The relative stability of four peri planar conformational isomers were (E-ap) > (Z-ap) > (E-sp) > (Z-ap), respectively, and the most stable stereo structures shows that the Y-substituted phenyl group $(C_6H_4-Y)$ occupy vertical $(90^{\circ})$ position on the plane of the benzimidochloroformyl group in (E-ap) conformer. The nucleophilic substitution of water molecule occurs by sigma attack to the activatived azomethine carbon atom of (I) derivatives.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.113-121
• /
• 2013

The rate that women's EMTs(emergency medical technicians) in fire department occupy is increasing, but my general plan is aimed at suggesting the improving plan for the working environment of women's EMTs paying attention to the duty stresses of increasing women's EMTs, because improvement for the working environment of women's EMTs is being proceeded slowly. I suggested my improving plan for solving the working stress on the basis of a survey of the Recognition against women's EMTs as follows. Firstly, I suggested that physical strength of women's EMTs should be managed well continually via program establishment and a defined evaluation not only by employing a professional person in charge for physical strength in firehouse, but also by replenishing the suitable number for the urgent mobilization. Secondly, I suggested that the suitable number for the urgent mobilization should be increased to 3 including an ambulance driver. Thirdly, I suggested necessity such as the fruitful education and the creation of circumstances that can focus on education for improving participation rate, development of various new educational program, incentive program and penalty. finally, I suggested the fact that is related to the actual re-amendment of the concerned law and ordinance such as not only the smooth treatment of penalty for a traffic signal violation of ambulance and the legal remedy system due to aggravation of a patient's condition during a first-aid course, but also workshop and meeting among the periodical EMTs and administration of special therapy program and sufficient recess.

• Journal of Forest and Environmental Science
• /
• v.31 no.4
• /
• pp.261-266
• /
• 2015

We investigated habitat characteristics of the yellow-throated marten Martes flavigula (Carnivora : Mustelidae) using geographic information system (GIS). GPS coordinates of the target mammal traces and seven habitat factors were used for the GIS analysis. The Odaesan National Park (ONP) is selected as a study area for GIS analysis of the habitat characteristics. According to the GIS analysis of whole area of ONP, main forest type was broadleaf trees which occupy 72% of forests. Trees of 4th to 6th age-calss account for 93% of the ONP forests. The mean elevation and slope of ONP was 901 m and $22.1^{\circ}$, respectively. According to the GIS analysis of M. flavigula habitats in ONP, most M. flavigula traces were found in borad-leaf forests and coniferous forests which are main forest types of ONP. In addition, the yellow-throated marten recorded a relatively high appearance rate of 7% in unstocked forests, which account for much less than 1% of the area of ONP. Most of the marten traces were found in forests with trees of 4th to 6th age-classes. The traces were found in the forest types in higher elevation (1,080.3 m) and lower slope ($15.0^{\circ}$) on average, compared with those of ONP. Appearance rate of the marten traces was 96% in range less than 600 m from the water. The traces were frequently found in areas far distantly beyond 1,400 m range from human residental areas and cultivated areas.

• Asian Journal for Public Opinion Research
• /
• v.10 no.3
• /
• pp.200-229
• /
• 2022

The purpose of this study is to analyze the effects of youth job policy measures, set forth in Korea's 2016-2020 Third Basic Plan for Low Fertility and Aging Society (December 2015), on marriage and fertility among young people. Based on the results, we provide theoretical explanations for the findings and suggest policy alternatives to overcome the low fertility phenomenon in Korea. Previous studies have shown that employment is an important factor for marriage among youth, and a job policy could increase marriage and fertility rates. To test this assumption, we performed an exact matching between Statistics Korea's Employee-Enterprise Linkage DB and the Newlyweds DB from 2011 to 2019, in order to identify all young people aged 15-34. Then, linear spline regression analysis was used to examine the impact of the youth job policy on marriage and fertility. Comparing the period before the implementation of the employment policy (2011-2015) and after (2016-2019), the fertility rate increased as the number of young people looking for work increased. In addition, it was found that these impacts were greater after the implementation of the measures (2016-2019) than before (2011-2015). It is interesting to note that job growth among young people did not lead to an increase in marriage. However, the number of births significantly increased when young people who occupy jobs got married, which seems to be related to the delay in marriage among young people who are employed. Survey results about the intentions to marry and views on fertility are utilized for the explanation of the study results.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.25-53
• /
• 2013

This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.