• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.267-272
• /
• 2012

Dental professionals are exposed to various occupational risks, among which the problem of hearing damage has been newly revealed. There have been some researches reporting that noise occurring in a dental office exceeds the Occupational Safety and Health Act (OSHA) Standards. Especially, the pediatric dentists are repeatedly exposed to an additional noise source called the crying sound of children in addition to all kinds of noises from dental instruments. Accordingly, this study intended to investigate the noise environment likely to affect pediatric dentists and to examine the possibility of resultant hearing damages. The level of noise was measured respectively, when various dental instruments (ultrasonic scaler, high-speed handpiece, low-speed handpiece) are operated, when children are crying, and when both occasions take place simultaneously (from the distance of 30 cm) with a portable noise meter. And the daily duration of pediatric dentists exposed to the noise environment was surveyed. The results were compared with the standard value of noise threshold of NIOSH, OSHA, and that of hearing damage of CRA News letter respectively. Considering the intensity and exposure time, the noise environment of pediatric dentists exceeds the allowable noise threshold values. Even only one exposure to crying child was likely to lead to permanent hearing damage. Comparatively, pediatric dentists have a higher risk for occupational hearing damages, and some active measures are thought highly desirable to minimize it.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.92-98
• /
• 2015

Toxic gases are managed by High Pressure Gas Safety Control Act. Toxic Gases are "31 designated species and each gas of which the permissible concentration($LC_{50}$) is equal to or less than 5000 ppm as defined in High Pressure Gas Safety Control Act.". Korean toxic gas usage in accordance with the growth of the electronic industry has increased explosively. The demand of toxic gas research in domestic university laboratories has grown together. But the research associated with toxic gas safety management in the domestic laboratory is nonexistent state. In this study, we identified weak points of toxic gas safety management through a survey of domestic university laboratory facilities. This paper presented toxic gas safety measures in order to overcome those weak points. Also this paper developed a standard checklist to improve and ensure safe management of toxic gas facility in accordance with the proposed measures. This research is to enforce safety management of toxic gas facilities in domestic university laboratory and it will provide safety guidelines for every laboratory.

• Journal of the Korean Society of Safety
• /
• v.37 no.3
• /
• pp.79-85
• /
• 2022

The annual statistics on fall fatality consistently show the dangers of working at height. The "Occupational Safety and Health Act" specifies legal restrictions on work at height using a scaffold. However, there are different classes of work at height, and some rely only on ropes. This study proposes education, training, and institutionalization of the "rope access work system." In brief, it was concluded that accurate instruction on the knot method and the setting of some standards were important. For this, the use of an integrated work chair harness equipment was suggested.

• Explosives and Blasting
• /
• v.42 no.2
• /
• pp.1-11
• /
• 2024

The purpose of this study is to suggest amendments for the effective operation of safety and health regulations that stipulate safety standards for the prevention of industrial accidents in blasting and tunneling works. Because the regulations on Occupational Safety and Health Standards have not been revised for a long time, the regulations do not meet the requirements in site, and it is reported that it is difficult to implement the regulations at workplaces due to various deficiencies. Therefore, this study aims to abolish or improve unreasonable regulations that do not fit reality due to changes in the technology environment, or to modify low-operability regulations considering domestic conditions in blasting and tunneling workplaces. By comparing domestic laws and standards related to blasting and tunneling works with foreign ones, the improvement measures were suggested.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.85-91
• /
• 2001

The regulation of Material safety data sheets(MSDS) was required for the chemicals in use in the workplace from July 1976. Under the provisions of the workplace hazardous materials information system, employers in Korea must be provided with accurate and comprehensive MSDS. To examine the reliability of MSDS for organic solvents, 63 organic solvents and MSDS were collected from the workplace of 39 companies located in Kyonggi province. Manufacture\`s MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. 38 solvents were able to analyze their composition by gas chromatography-mass selective detector(GC-MSD). Among them, 28 solvents were incorrect in their composition and contents. In some case, health hazardous or carcinogenic chemicals which were not included in the MSDS were detected from samples. As a result of evaluating whether the MSDS correspond to the regulation required by Industrial Safety and Health Act (ISHA), the information in the MSDS including hazard classification, occupational exposure level, toxicity, regulatory information were incorrectly provided, and some MSDS did not disclose carcinogenic in their MSDS, and some MSDS were not written in the standard format. From this survey, continuous monitoring and promoting correct MSDS, and analyzing the components of the solvents were required to endure the reliability of MSDS for organic solvents.

• Journal of agricultural medicine and community health
• /
• v.31 no.3
• /
• pp.219-236
• /
• 2006

Objectives: To develop a model of a official management system for agricultural disease, injury and accidents, We analyzed current Korean status and management system about occupational injury and accident of farmers. Methods: For national management systems of industry safety and health and current status of occupational injuries and accidents of farmers, related literature such as books, theses, articles, and web documents were collected and analyzed. Results and Conclusion: The regulations of protecting occupational injury and accidents of farmers are suggested as follows: (1)insurance and compensation act for occupational injury and accident of farmers, (2)setting standards of occupational injuries and accidents of farmers, (3)mandating the usage of safety devices for agricultural vehicles and equipments, (4)reporting occupational injuries and accidents that occur among farmers, (5)registering pesticides and assessing safety usage, (6)implementing safety training, (7)supporting personal protective equipments and agricultural safe facilities etc.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.108-113
• /
• 2015

Plastic injection moulding machine is widely used for many industrial field. It is classified into mandatory safety certification machinery in Industrial Safety and Health Act because of its high hazard. In order to prevent industrial accidents by plastic injection moulding machine, it is necessary for designer to identify hazardous factors and assess the failure modes to mitigate them. This study tabulates the failure modes of main parts of plastic injection moulding machine and how their failure has affect on the machine being considered. Failure Mode & Effect Analysis(FMEA) method has been used to assess the hazard on plastic injection moulding machine. Risk and risk priority number(RPN) has been calculated in order to estimate the hazard of failures using severity, probability and detection. Accidents caused by plastic injection moulding machine is compared with the RPN which was estimated by main regions such as injection unit, clamping unit, hydraulic and system units to find out the most dangerous region. As the results, the order of RPN is injection unit, clamping unit, hydraulic unit and system units. Barrel is the most dangerous part in the plastic injection moulding machine.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2010

Objectives : The purposes of this study were to evaluate exhaust ventilation systems(EVSs) and to suggest problems and improvements. Methods : For 50 small and medium-sized enterprises, we carried out evaluation of EVSs. We evaluated hoods with smoke tester and measurement of capture velocity. In addition, we used several indicators for performance evaluation designed in this study. Results : 1. Based on the smoke flow pattern and the criteria of occupational health and safety act, 67.8% of hoods were rated 'good' level at smoke test whereas 26.3% were rated 'good' level at measurement of capture velocity. 2. 29.3% of hoods, of which ratio of measured actual air flow at hood(Qah) to required ideal exhaust air flow at hood(Qih) was 1 or more, were rated 'good' level. 3. The % of EVS, of which ratio of measured actual air flow at stack(Qast) to total required ideal exhaust air flow at hood(Qith) was 1 or more, was 29.0%. 4. For the ratio of measured Qast to existing air flow at fan(Qfan), only 5% of EVSs were 1 or more and 26.0% were 0.8 or more but less than 1.0. 5. For the ratio of measured Qast to total measured actual exhaust air flow at hood(Qath), 74.0% were 0.8 or more but less than 1.0. 6. The percentage of EVS, of which ratio of total measured Qath to existing Qfan was 0.8 or more, was 19.0%. 7. The percentage of EVS, of which ratio of total measured Qath to total required ideal exhaust Qith was 1 or more, was 26.0%. 8. For the comprehensive evaluation indicators designed in this study, 29.0% were 0.8 or more. Conclusions : We found that few exhaust local ventilations at small and medium-sized enterprises were rated 'good' level and that most exhaust local ventilations had 'poor' design and installation. Therefore, relevant professional manpower and enterprises have to construct exhaust local ventilation where it is needed, and technical guidance and economic support are needed to improve 'poor' exhaust local ventilation after self-evaluation.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.137-142
• /
• 2005

This study aims to survey the fatal industrial accidents attributed to crane, and to present their preventive measures based on the results of the survey. The survey was on the basis of 60 fatal accidents caused by crane from January 1998 to July 2003. The results showed that 1) of varying types of crane, fatal accidents were most frequently caused by mobile no: 2) more crane accidents occurred on weekend of Friday and Saturday by a day of the week; 3) experienced crane operators with long length of work or the age of over 40 were more frequently subjected to fatal accidents compared to novice operators; and 4) crane accidents were more attributable to unsafe acts such as poor working method, non-observance for safe working rules, etc. than hardware aspects of crane itself. It is recommended that for reducing crane accidents, more practical education and training for crane operation be reinforced.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.723-733
• /
• 2020

Purpose: This study was designed to draw up problems with the safety and health diagnosis system, and designed a hierarchical survey model of the clauses prescribed by the Occupational Safety and Health Act. The purpose of the survey is to derive the effectiveness of the safety and health diagnosis system at the construction site by targeting three groups of experts. Method: This paper set up the legal status analysis and overseas related system analysis and AHP hierarchy analysis survey model. In addition, the validity of the analysis results was verified by a survey. Results: The analysis of the survey items showed a high importance on items included in the human utilization and the precision of the pre-plan. In particular, mid-sized construction companies showed the highest importance for their active activities after the safety and health diagnosis. Conclusion: Through this study, we should recognize problems for improving the safety and health system of construction industry and prepare policy and institutional improvement measures for experts.