• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.469-476
• /
• 2019

The purpose of this study examines the education, knowledge and behavior of radiation safety management among dental workers and compares the education, knowledge and behavior between dental hygienist group and other occupational groups. This study was conducted from November 2nd to November14th, 2019. The survey was conducted on dental workers(dental hygienists, nursing, assistants, coordinators, etc.) who worked in dental hospitals and clinics in Busan area. The tool of this study was modified and adapted to the clinical setting based on the questionnaire. Radiation safety education has 39 dental hygienists who had more education than non-dental hygienists (p=0.286). The most common types of radiation safety education were self-education which usually performed by dentistry, followed by conservative education and others. The average of radiation attitudes, knowledge and behaviors was higher in the dental hygienist group then in the non-dental hygienist group. On the item-specific behavior among employees, the question of 'the radiation should be shielded according to the menstrual cycle or pregnancy of the woman of childbearing' was significant (p<0.05). On the item-specific knowledge between occupations, the question of 'the intensity of X-rays decreases over distance' and 'the individual exposure can be measured by TLD badge or film badge' was significant (p<0.05). Taken together, these results indicate that the dental hygienist group is more concerned about radiation safety and that the dental hygienist group is receiving more radiation safety management training. However, if there is a low level of 'has experienced' in the presence or absence of safety management education, it is difficult to train radiation safety management in dentistry. Therefore, it is considered that dentists should be trained in radiation safety management periodically to pay attention to radiation safety accidents.

• 공학교육연구
• /
• 제3권2호
• /
• pp.61-70
• /
• 2000

경쟁 사회에서 생존을 위해 직업 교육기관은 학생들에게 능력 중심 직업 교육을 실시하여야 하며 직업 분야 진로 선택의 문제를 해결하기 위해서는 체계적인 진로 지도 프로그램이 개발되어야 한다. 대학 1학년 학생들에게 미래의 직업 분야에 적응할 수 있도록 원활한 전공 선택과 전공 교과 학습 상담을 위한 진로 지도가 필요하다. 직업 분야 관련 과목의 조기 학습은 학생들의 학습 동기 유발에 매우 중요하며 이를 통해 학생들은 장래 직업 선택과 다양한 직업 분야의 진로 정보를 제공받게 된다. 본 연구에서는 진로 지도 교과목 개발과 학습 계획을 위한 learning map을 통하여 교육 수요자 스스로 학습 계획을 세우고 대학 과정의 특정 직업 관련 지식의 획득과 장래 직업 준비를 위한 전공 진로 지도 프로그램을 개발하였다. 설문지를 통하여 그 타당성을 검증함으로서 장래 직업 분야에서 유용한 직업인이 될 수 있도록 직업 교육 활성화 방안을 제시하였다.

• Environmental Analysis Health and Toxicology
• /
• 제21권3호
• /
• pp.229-238
• /
• 2006

Although, mercury (Hg) is not a naturally abundant element in the environment, residues frequently occur in many environmental compartments because of widespread contamination from industrial and agricultural practices. This research evaluated Hg-B concentrations of general population who was not occupationally exposed. And also evaluates the association between life factor and health effect with Hg-B concentration of general adult through interrelationship estimation and index about kidney function and oxidative damage that appeared by questionnaire survey and medical examination. Average concentration of Hg-B was 3.19 $\mu$g/L (ND$\sim$8.64 $\mu$g/L), and persons who exceed mercury exposure level (5 $\mu$g/L) presented in WHO (1990) appeared by 16 (7.0%). High-risk group (smoking and meat main intake group) had significantly higher Hg-B concentration than low-risk group (non-smoking and vegetable diet main intake group) (p < 0.05, low-risk group: 3.30 $\mu$g/L (ND$\sim$8.64 $\mu$g/L), high-risk group: 4.27 $\mu$g/L (ND$\sim$7.84 $\mu$g/L).

• International Journal of Oral Biology
• /
• 제36권3호
• /
• pp.123-128
• /
• 2011

The notion that dental amalgam is a potential source of mercury exposure remains a controversial issue. However, there are few epidemiological analyses that have addressed whether this occurs in children. We aimed in our current study to identify the relationship between dental amalgam filling surfaces and the blood mercury levels in a cohort of 711 South Korean children aged between 8-9 years. Oral examinations were conducted to detect the number of amalgam filling surfaces on the teeth of these individuals. Blood samples were also taken from these children to assess the levels of mercury accumulation in the body. The amalgam filling surfaces were classified into four groups based on their number: 0 (n = 368), 1-5 (n = 219), 6-10 (n = 89), and 11+ (n = 35). The blood mercury levels in the children with more than 10 amalgam surfaces was 0.47 ${\mu}g$/L higher on average than those with no amalgam surfaces after adjusting for the frequency of fish or seafood consumption, age, and gender (P < 0.05). We found from our data that a higher number of dental amalgam fillings correlated with a higher blood mercury level in Korean children. Further studies are needed to investigate whether these elevated mercury levels exert neurotoxic or nephrotoxic effects.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.55-66
• /
• 2015

In the perspective of industrial health management, it is important for the employee to decrease their job stress, to improve their productivity and quality of labor. In this study, the job stress, and it's influence on PWI(Psychosocial Wellbeing Index) were investigated by the questionnaire survey of 138 industrial workers who had studied assistive technology in college. The contents of questionnaire consist of the demographic characteristics, job-related characteristics, job stress and psycho-social stress. We evaluated job stress by KOSS-SF(Korean Occupational Stress Scale-Sort Form) and psychosocial stress by PWI-SF(Psychosocial Well-being Index-Short Form). To analyze the results, we evaluated the exposure level of KOSS and PWI by demographic characteristics and job-related characteristics using significance tests. Also, we estimated the relationship among demographic characteristics, job-related characteristics, job stress and psychosocial stress, using correlation analysis. As a results, all workers were found to be in a group under the high risky stress. It showed that the scale index of female's job non-autonomy and pwi were much larger than those of male's. Therefore, to guarantee job autonomy of female workers should be more emphasized, to improve their working environment. Job type had significant relationships with many job stress category; physical environment, job demand, job instability and organization culture. Regarding pwi, the scale index of the workers who is in charge of the civil service such as contacting the disabled and the aged in person, were much larger than that of the other workers. Accordingly, the job stress management program including physical environment, job demand, job instability and organization culture, should be suggested, to decrease the stress of the workers in charge of the disabled and the elders service. The strongest predictors of pwi was organization system through maximum positive relations between organization system and pwi. Therefore, it indicates that improvement of organization system such as a fair merit rating, a manpower supply, demand plan and department cooperation is urgently needed to reduce pwi.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.239-245
• /
• 2003

The occurrence and pattern of tooth wear are related to cultural, dietary, occupational, and geographic factors, Excessive occlusal wear can result in pulpal exposure, occlusal disharmony, functional inability. Surface loss can be differentiated into 3 general causal categories: i) mechanical loss, which includes attrition, ii) abrasion chemical loss including erosion, and finally iii) a proposed biomechanical category described as abfraction. Considering that mechanical wear is frequently asymptomatic, patients may have parafunctional habit. Structured clinical decision analysis in fixed prosthodontics, as other branches of dentistry do, allows the practitioner to consider the patient's problems more thoroughly based on the clinical data and extenuation factors. This discipline of decision making is intended to complement the experience level and educational background of the clinician in assisting the patient through the decision process. Additionally, CDA helps the clinician define not only the pre-existing condition of the patient prior to irreversible therapy, but also better treatment strategies for the patient over an extended period. The systematic nature of decision analysis stimulates the dentists to pay further attention to those factors, which is germane to the overall complexity of the case, and exclude factors, which have little influence on its final outcome. Further implementation of computerized databases, procedural outcome probabilities based on clinical and laboratory studies and the clinical experience of those who use it, may provide quite a promising future in the field of structured and formalized clinical decision analysis.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.371-381
• /
• 2023

Evaluating the effectiveness of the radiation protection measures deployed at the Centralized Radioactive Waste Management Facility in Ghana is pivotal to guaranteeing the safety of personnel, public and the environment, thus the need for this study. Radiagem^TM 2000 was used in measuring the dose rate of the facility whilst the personal radiation exposure of the personnel from 2011 to 2022 was measured from the thermoluminescent dosimeter badges using Harshaw 6600 Plus Automated TLD Reader. The decay store containing scrap metals from dismantled disused sealed radioactive sources (DSRS), and low-level wastes measured the highest dose rate of 1.06 ± 0.92 µSv·h^-1. The range of the mean annual average personnel dose equivalent is 0.41-2.07 mSv. The annual effective doses are below the ICRP limit of 20 mSv. From the multivariate principal component analysis biplot, all the personal dose equivalent formed a cluster, and the cluster is mostly influenced by the radiological data from the outer wall surface of the facility where no DSRS are stored. The personal dose equivalents are not primarily due to the radiation exposures of staff during operations with DSRS at the facility but can be attributed to environmental radiation, thus the current radiation protection measures at the Facility can be deemed as effective.

• Toxicological Research
• /
• 제23권2호
• /
• pp.151-158
• /
• 2007

tert-Butyl acetate is an organic solvent used for coatings, industrial cleaning, and surface treatment applications. This study investigated the potential adverse effects of tert-butyl acetate on pregnant dams and embryo-fetal development after maternal exposure on gestational days 6 through 19 in rats. The test chemical was administered to pregnant rats by gavage at dose levels of 0, 500, 1,000, 1,500, and 2,000 mg/kg/day. All dams were subjected to a caesarean section on day 20 of gestation and their fetuses were examined for any external, visceral, and skeletal abnormalities. At 2,000 mg/kg, treatment-related clinical signs, including piloerection, abnormal gait, decreased locomotor activity, loss of fur, reddish tear, anorexia, nasal discharge, vocalization and coma, were observed in a dose-dependent manner. All dams died between the 2nd day and 5th day of treatment due to a severe systemic toxicity. At 1,500 mg/kg, minimal maternal toxicity including an increase in the incidence of decreased locomotor activity and loss of fur, and an increase in the weights of adrenal glands and liver was observed. On the contrary, no significant adverse effect on the embryo-fetal development was detected. There were no adverse effects on either pregnant dams or embryo-fetal development at <1,000 mg/kg. These results show that a 14-day repeated oral dose of tert-butyl acetate in rats caused a minimal maternal toxicity including increases in the incidence of clinical signs and the weights of adrenal glands and liver, but no embryotoxicity and teratogenicity at 1,500 mg/kg/day. Under these experimental conditions, the no-observed-adverse-effect level (NOAEL) of tert-butyl acetate is estimated to be 1,000 mg/kg per day for dams and 1,500 mg/kg per day for embryo-fetal development.

• 한국산업보건학회지
• /
• 제10권2호
• /
• pp.18-26
• /
• 2000

Since the regulation of MSDS (Material Safety Data Sheets) had started from July 1996, employers were required to furnish MSDS for the chemicals in use in their workplace. However, many MSDS did not contain upright information for the chemicals, and they were not updated regularly, and were not written in the standard format required by the Industrial Safety and Health Act (ISHA). The purposes of this study were 1) to examine the reliability of MSDS for mixed solvents, 2) to provide reliable MSDS to employers or employees, 3) to find out any difficulties in implementing MSDS after the initiation, and 4) to promote regular MSDS updating and to ensure the reliability of MSDS for chemical manufacturers. To check the reliability of MSDS of mixed chemicals, 21 samples of mostly degreasing solvents were collected along with their MSDS from the work place. The samples were analyzed by gas chromatography-mass selective detector(GC-MSD). Their components were classified as saturated hydrocarbon, cyclic hydrocarbon, aromatics, and halogen containing hydrocarbon, and the amount of each class were measured. Manufacture's MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. Finally, each item of MSDS was evaluated whether the MSDS correspond to the regulation required by ISHA. The results were following: 1) most of the degreasing solvents in MSDS were incorrect in their composition and contents, 2) the information in the MSDS including hazard classification, exposure level, toxicity, regulatory information were incorrectly provided, and 3) some MSDS did not disclose carcinogens in their MSDS. Continuous monitoring of MSDS was required to ensure reliability of MSDS. The Chemicals containing hydrocarbons from C10-C15 need to be tested to provide toxicity data. In addition, governmental support for providing correct MSDS was recommended to ensure reliability of MSDS. The MSDS regulation relating to the confidential business information may need to be revised to ensure reliability of MSDS.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권2호
• /
• pp.141-149
• /
• 2012

최근 최첨단 핵의학 영상기술의 발달로 임상적 이용이 증가되어 방사선 선원을 취급하는 핵의학과 작업종사자의 몸통 부위와 손 부위에 노출되는 외부 피폭선량을 평가하고 검사 빈도가 높은 전신 뼈검사(Whole body Bone Scan)와 양전자 단층촬영(PET/CT)시 방사선 선원($^{99m}Tc$-HDP, $^{18}F$-FDG)의 취급 및 검사에 따른 손 부위 피폭선량을 측정하고자 한다. 방사선 선원 취급 시 방호구 착용 및 손 부위를 측정 할 수 있는 선량계 보유 여부를 알아보기 위해 4개의 의료기관에 설문 하였다. 방사선 선원을 직접 분주하고 주사하는 숙련된 작업종사자의 가슴과 약지손가락에 열형광 선량계을 착용하여 누적된 외부 방사선 선량을 측정하고 손 부위의 외부 방사선량 측정을 위해 구간별 일일 방사선 선원으로부터 노출되는 선량과 시간을 포켓도시메터를 이용하여 각각 측정 하였다. 인천광역시 4개 의료기관을 대상으로 조사한 결과 손 부위의 방사선 피폭선량 측정기를 구비한 의료기관은 1곳을 제외한 3곳은 구비하지 않았고 차폐기구 사용은 방사선 선원으로부터 몸통을 보호하기 위해 차폐기구를 사용한 곳이 대부분 이었고, 일부 의료기관에서는 사용하지 않는 곳도 있었다. 방사선 선원을 직접 분배하고 투여하는 핵의학과 작업종사자의 손 부위 외부피폭 선량은 몸통부위보다 약 2배 이상 많은 선량을 받았고, 검사 빈도가 높은 전신 뼈 검사와 양전자 단층촬영 시 각 구간별 외부피폭 선량을 보면 방사성의약품 합성 및 분배용기 장착, 분배, 투여, 이동 순으로 각각 나타났다. 또한 방사선 선원 투여시 방호구 착용 전/후 손 부위의 피폭선량을 측정한 결과 통계적 유의한 차이가 있었다. 연구결과 작업종사자의 유효선량에는 못 미치지만 비 작업종사자보다 비교적 높은 선량을 받고 있어 방사선 선원을 근거리에서 노출되는 작업종사자는 안전관리 규정을 준수하고 손 부위 선량계(Ring TLD)를 착용하여 방사선 선원으로부터 피폭 저감을 위한 활동을 하여야 한다.