• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.151-157
• /
• 2018

Objectives: This study was conducted in order to evaluate $PM_{10}$ concentrations at eight highway tollgate booths from July to September 2017. Methods: A total of 16 samples were collected from eight toll booths. Each $PM_{10}$ sample was collected using a 37 mm PTFE filter attached to a Personal Environment Monitor. Results: The geometric mean concentrations of $PM_{10}$ in the toll booths was $83.51{\mu}g/m^3$. The mean $PM_{10}$ concentrations measured on freight roadways were much higher than those of measured on general roadways($102.46{\mu}g/m^3$ and $68.05{\mu}g/m^3$, respectively). $PM_{10}$ was revealed to be higher in the morning($105.59{\mu}g/m^3$) than at dawn or in the afternoon($71.26{\mu}g/m^3$ and $61.22{\mu}g/m^3$, respectively). The mean $PM_{10}$ concentration in toll booths ventilated through an air conditioner was higher than that for those using a window or no ventilation. The rate of exceeding the Ministry of Environment Maintenance Limit($200{\mu}g/m^3$) was 6.25%, and the rate of exceeding the Ministry of Labor Recommended Limit($150{\mu}g/m^3$) was 12.5%. Conclusions: In order to protect the health of toll booth workers exposed to airborne dust, it is necessary to check the exposure level from indoor air quality on a regular basis and to manage it appropriately according to the results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.2
• /
• pp.113-126
• /
• 2009

In the recent years, health effect of dimethylformamide(DMF) has been one of critical industrial hygiene issues. There might be many factors to increase the exposure level of DMF. Among those factors, industrial ventilation would be one of the main factors. In this study, industrial ventilation systems of printing processes in synthetic leather factories were thoroughly surveyed and the improved ventilation systems were proposed. 7 synthetic leather factories were selected for this study. After the ventilation systems were visually inspected, each component of the system was tested by using the appropriate instruments. Hood face velocities, fan exhaust flow rates, fan static pressures, fan rotation rates, etc were measured. In addition, flow visualization techniques were used to observe flow patten around hoods and inside the factory buildings. After gathering all qualitative and quantitative information, the test results were analysed to see if any improvement might be necessary. For the system to be improved, the re-design plans were made by using computational fluid dynamics softwares. The softwares used in this study were AIRPAK and STAR-CD. The effectiveness of the several improvement options were tested, then the best cost effective option was selected. Finally, the standard ventilation systems were proposed to minimize the exposure levels of DMF.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.2
• /
• pp.19-24
• /
• 2021

The petroleum refinery industry handles a variety of complex chemical substances and employs a large number of people around the world. According to previous research, diseases caused by exposure to chemicals were quite common among workers in refineries until the 1980s. More recently, it is unusual for oil refinery workers to suffer from these serious diseases. The objective of this study was to identify the occurrence level of general diseases and any differences in lifestyle habits of workers in refineries in Korea compared with the general population. In this study, we used the results of health examinations from 2014 for workers at a large oil refinery in South Korea. In addition, based on the results of KNHANES from 2014 as representative of the population, hypertension, diabetes, anemia, hyperlipidemia, liver function abnormality, and kidney function abnormality were calculated using the standardized incidence rate. Hypertension showed a low result with an SIR of less than 1, but a high result in the case of abnormal liver function. The workers' occurrence rates of hypertension, hyperlipidemia, kidney dysfunction, and anemia were lower than those of ordinary salaried employees. however, their occurrence rate for abnormal liver function was markedly higher. In lifestyle habits, the smoking rate of workers was low while the alcohol consumption rate was quite high. This study has improved the understanding of the health status of workers in a large oil refinery in Korea, and has shown the impact of lifestyle habits related to the work environment on chronic diseases.

• Journal of Environmental Policy
• /
• v.1 no.1
• /
• pp.75-90
• /
• 2002

Methyl tertiary-butyl ether(MTBE) is used as an octane enhancer in gasoline. MTBE can enter the environment at any stage in the production, storage, and transport of undiluted MTBE or MTBE-blended gasoline. Although data on concentrations of MTBE in the environment are not available, modelling of fate of MTBE has provided predictions for concentrations of MTBE in the various media to which humans and other organisms may be exposed. Many individuals do not taste or smell MTBE at the $5{\mu}g/L$ level, and thus may be exposed to higher concentrations for a significant amount of time. MTBE exposure through inhalation is likely to be below health-threatening levels, except for occupational workers such as gasoline station attendants and auto mechanics. It should be stressed, however, that there are important data gaps in our understanding of the acute and chronic toxicity of MTBE. Little or no research concern including being conducted that directly addresses these issues. Rather than any immediate ban on MTBE, I recommend consideration of phasing out MTBE in USA and other countries. During the transition phase, a number of policies are suggested to reduce the risk of using MTBE. One of these policies is that the state should invest in a research program. Such research should, for example, examine effective alternatives for motor vehicle fuels, and detect concentrations of MTBE in ambient air, water, and other environmental media.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.85-91
• /
• 2001

The regulation of Material safety data sheets(MSDS) was required for the chemicals in use in the workplace from July 1976. Under the provisions of the workplace hazardous materials information system, employers in Korea must be provided with accurate and comprehensive MSDS. To examine the reliability of MSDS for organic solvents, 63 organic solvents and MSDS were collected from the workplace of 39 companies located in Kyonggi province. Manufacture\`s MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. 38 solvents were able to analyze their composition by gas chromatography-mass selective detector(GC-MSD). Among them, 28 solvents were incorrect in their composition and contents. In some case, health hazardous or carcinogenic chemicals which were not included in the MSDS were detected from samples. As a result of evaluating whether the MSDS correspond to the regulation required by Industrial Safety and Health Act (ISHA), the information in the MSDS including hazard classification, occupational exposure level, toxicity, regulatory information were incorrectly provided, and some MSDS did not disclose carcinogenic in their MSDS, and some MSDS were not written in the standard format. From this survey, continuous monitoring and promoting correct MSDS, and analyzing the components of the solvents were required to endure the reliability of MSDS for organic solvents.

• Journal of Environmental Health Sciences
• /
• v.33 no.6
• /
• pp.513-516
• /
• 2007

This investigation was intended to find out the estrogenic effect of chlortetracycline (CTC) on vitellogenin induction in adult male Japanese medaka (Oryzias latipes). Vitellogenin (Vtg) produced in male fish has been used to as one of a biomarker of endocrine disrupters. The positive control was $17{\beta}-estradiol$ (E2) that induced Vtg in male fish. As a result, male and female fish were exposed to 0.1, 1, 10 and 100 ppm of CTC. Western blot results showed approximately 205 kDa, that is similar to myosin at high molecular weight range Sigma maker. Vtg band was showed fainted to 10 and 100ppm for chlortetracycline. Vtg concentration of CTC was qunatified by total protein quantification and ELISA. Exposure of the male fish to CTC of 0.1, 1, 10 and 100 ppm produced Vtg concentrations of 0.24, 0.12, 7.61 and 40.02%o, respectively, that value was elevated than control male fish (0.14%o). CTC exerted as a Vtg inducer in male fish from 10 ppm, but it was a reducer in female fish from 0.1 ppm level. The results say that vitellogenin induction patterns alter in male medaka treated with CTC, and that CTC may caused endocrine disruption in fish.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3035-3043
• /
• 2021

Epidemiological research has revealed that radiation exposure can cause cataracts. The Korean nuclear regulatory body has proposed the reduction of the occupational dose limit for the lens of the eye from 150 mSv/y to 100 mSv/5y, with an additional limitation of not exceeding 50 mSv/y for a specific year, taking into account the recommendations of the International Commission on Radiological Protection, and the International Atomic Energy Agency. This means that radiation workers should receive the same level of radiation safety for the lens of the eye as for whole-body protection. Korean nuclear power plants (NPPs) are conducting research to establish the radiation protection program for the lens of the eye. In terms of the preliminary results of the implementation of the radiation protection program for the lens of the eye dedicated to Korean NPPs, this review article summarizes the current state of understanding of the regulations, technical guidance, eye lens dosimeters, and radiation field conditions resulting in lens dose.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.49-50
• /
• 2023

Asbestos is a building material that has been actively used because of its excellent durability and heat resistance until 2009, when it was found to be a first-class carcinogen and prohibited in Korea. Currently, asbestos dismantling is an essential process in demolition of old buildings. Workers are likely to be exposed to asbestos in the process of dismantling and removing them, which causes various occupational diseases, suggesting related laws and work standards to ensure the safety of asbestos dismantling process. Accordingly, prior studies have been conducted to analyze the level of asbestos exposure and influencing factors occurring during work, but most of them are mainly concerning health issue while research on process risks considering field characteristics and safety aspects of the work processes is still insufficient. Therefore, this study aims to derive the process risks affecting the safety of workers based on the survey results of asbestos dismantling companies, and further proposed a cost calculation model taking those risks into account.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2024

Objectives: The study was performed to investigate characteristics of hazardous factors regarding chemical(liquid lime) tank dredging workers by case survey. Methods: Field data such as working condition, MSDS and respirators applied to chemical tank dredging work were analyzed and the work environmental factors of noise and indoor air quality were measured to compare existing data with actual work situations. Results: No health hazards to workers due to working conditions were confirmed during dredging work inside the chemical storage tank. All air quality measurement data during dredging work satisfied the management standards, and there were no by-products. During dredging work, there was a significant change in noise depending on the type of work, but considering the noise reduction rate(NRR) of the earplugs worn by workers, there was no actual health hazard due to noise exposure. Conclusions: A fit test for respirator and the expiration date of the safety helmet should be observed to ensure an appropriate level of safety and health for dredging workers in the chemical storage tank.

• Journal of Radiation Industry
• /
• v.17 no.3
• /
• pp.239-256
• /
• 2023

The classification of the radiation work performed in Korean nuclear power plants (NPPs) must be understood to provide workers with more comprehensive radiation protection. This study used annual reports on occupational exposure to investigate and analyze the similarities and differences in the radiation work performed in Korean NPPs with pressurized water reactors (PWRs) and pressurized heavy water reactors (PHWRs). The results showed that the radiation work performed in Korean NPPs could be classified into three categories. Category 1 contains work at the highest level. This work can be divided into individual tasks belonging to Category 2, which enables the evaluation of the radiation dose during the work. The work in Category 2 consists of tasks from Category 3, which contains basic detailed tasks that are not further subdivided. This study emphasized the need for the systematic management of the radiation work performed in both Korean PWRs and PHWRs, such as the tasks in Category 3, which are similar, with similar working conditions, for PWRs and PHWRs. It also suggested the need to establish a list of radiation work for decommissioning because Kori Unit 1 and Wolsong Unit 1 are currently in permanent shutdown and preparations are being made for their decommissioning.