• 대한치과의료관리학회지
• /
• 제9권1호
• /
• pp.7-13
• /
• 2021

The present randomized controlled trial aimed to evaluate changes in occlusion of indirect restorations before and after attachment using resin cement according to universal adhesives. This study included patients who underwent indirect restoration treatment at the Yonsei University Dental Hospital between April and October 2016. Universal adhesives requiring light curing and those not requiring light curing were used in this study. Changes in occlusion before and after adhesion of the indirect restoration were evaluated using articulating paper and shimstock as well as through the discomfort felt by the patients. To analyze the differences between the universal adhesive, Fisher's exact tests were performed using SPSS ver. 22.0 software. Of the 39 cases of indirect restoration, 29 were included in the study. A change in occlusion after adhesion of the indirect restoration was observed in only one case of universal adhesive that required light curing. The patient felt that the occlusion increased after the attachment of the restoration, and it was observed that the occlusion point was different from that before attachment. However, the results of the analysis were not statistically significant. Based on the findings, the universal adhesives did not affect the occlusion before and after indirect adhesion restoration using RelyX Ultimate.

• 대한원격탐사학회지
• /
• 제23권5호
• /
• pp.439-445
• /
• 2007

Stereoscopic viewing is an efficient technique for not only computer vision but also remote sensing applications. Generally, stereo pair obtained at the same time is necessary for 3D viewing, but it is possible to synthesize a stereomate suitable for stereo view with a single image and disparity-map. There have been researches concerning the generation of the synthetic stereomate from remote sensing imagery. However it is hard to find researches concerning the restoration of occlusion in stereomate. In this paper, we generated synthetic stereomates from remote sensing images, focused on the occlusion restoration. In order to figure out proper restoration methods depending on the spatial resolution of remote sensing imagery, we tested several methods including general interpolation and inpainting technique, then evaluated the results.

• 대한치과의사협회지
• /
• 제53권6호
• /
• pp.418-426
• /
• 2015

The appropriate occlusion is one of the most important factors for the long-term success of implant and its restorations. The purpose of this review is to investigate and define occlusal considerations to reduce failure of implant prostheses. The physiological movement of implants is markedly lower than that of natural teeth and they also lack in occlusal sensitivity. Proper occlusal pattern may be assigned to compensate for the biological disadvantages and occlusal contacts must be formed where the cantilever effect is minimized. Moreover, the long-term success of implants after osseointegration can be assured by reducing early occlusal loading to avoid implant overloading and selecting appropriate occlusion material. Occlusal overload was brought by the number and location of occlusal contacts, which are under the clinician's control. The concept of implant occlusion is based on the concepts derived from traditional prosthetics. Moreover, there are few evidence on the concept or design of implant occlusion. Several occlusal design was recommended for implant prosthesis. Mutually protected occlusion, group function occlusion and bilateral balance occlusion was recommended for the specific types of implant restorations. This article reviews proper design of occlusion for implant restoration and offers occlusion strategy clinically.

• Journal of Korean Dental Science
• /
• 제17권3호
• /
• pp.121-137
• /
• 2024

It is possible to design dental prosthesis in harmony with the patient's face and functional pathway using virtual patient created by integrating 3D diagnostic data such as intraoral scan, facial scan and jaw motion data. Also, esthetic teeth-gingiva relationship can be obtained, and post-surgical gingival outline can be predicted by using CAD software designed 3D surgical template during gingivectomy procedure. In this case report, 3D diagnostic data was collected from patients in need of esthetic anterior restoration, integrated on CAD software and applied to virtual articulator. Treatment outcome was simulated by creating virtual patient with dynamic occlusion. Esthetic anterior fixed restoration was fabricated by applying 3D surgical template designed on CAD software to gingivectomy procedure. To make sure that anterior guidance was formed in harmony with the patient's function pathway, occlusion was assessed following every step. The results were both functionally and esthetically satisfying.

• Journal of information and communication convergence engineering
• /
• 제14권1호
• /
• pp.57-63
• /
• 2016

In generally, the resolution of reconstructed three-dimensional images can be seriously degraded by undesired occlusions in the integral imaging system, because the undesired information of the occlusion overlap the three-dimensional images to be reconstructed. To solve the problem of the undesired occlusion, we present an exemplar-based image restoration method in integral imaging system. In the proposed method, a minimum spanning tree-based stereo matching method is used to remove the region of undesired occlusions in each elemental image. After that, the removed occlusion region of each elemental images are re-established by using the exemplar-based image restoration method. For further improve the performance of the image restoration, the structure tensor is used to solve the filling error cause by discontinuous structures. Finally, the resolution enhanced three-dimensional images are reconstructed by using the restored elemental images. The preliminary experiments are presented to demonstrate the feasibility of the proposed method.

• 대한치과의사협회지
• /
• 제55권12호
• /
• pp.842-849
• /
• 2017

The term, 'crossed occlusion' implies clinical situation in which the residual teeth in one arch have no contact with those in the antagonistic arch, resulting in the collapse of occlusal vertical dimension. The treatment goal of this pathologic condition is restoration of the collapsed vertical dimension and stabilization of abnormal mandibular position. Previously, konus removable prostheses or tooth supported overdentures were suggested to solve crossed occlusion. Nowadays, dental implants have been used for definitive support to solve this problem. In this case report, a 65 years old female patient had a crossed occlusion, in which the maxillary posterior residual teeth and mandibular anterior residual teeth cross. Interim removable and fixed dental prostheses were used to confirm the proper vertical and horizontal jaw relation. After that, the mandibular posterior edentulous region was restored with implant-supported fixed dental prostheses. Computer tomography guided implant surgery was performed according to the concept of the restoration-driven implant placement. The maxillary anterior edentulous region was restored with Kennedy class IV removable prosthesis, considering the patient's economic status. The patient's jaw position and prostheses have been well maintained at the follow-up after 6 months of definitive restoration. The antero-posterior crossed occlusion problems appeared to be effectively solved with the combination of removable in one arch and implant-supported fixed prostheses in the other.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.330-337
• /
• 2018

무치악 환자에게 임플란트 지지 고정성 보철수복 치료는 그 효용성이 검증되었으나, 복잡한 치료과정이 수반된다. 반면, 현대 치의학에서 디지털 기술력은 나날이 발전하여 현재 무치악 환자의 임플란트 수복치료까지 그 범위를 확장하였다. 본 증례에서는 66세 하악 무치악 환자의 임플란트 고정성 보철 수복에 대하여 진단부터 수술, 임시수복물 및 최종수복물의 디자인과 제작까지 디지털 시스템을 모든 단계에 이용하였다. 수술 전 진단단계에서 구강스캐너를 이용한 점막스캔과 환자의 안정적인 기존 총의치 교합을 토대로 임시수복물을 디자인하였다. 수술가이드를 이용하여 무절개 임플란트 식립 후에 사전제작한 임시수복물을 임플란트와 연결하여 즉시 임시수복물로써 사용하였다. 디지털 기술을 이용하여 안정적인 교합이 형성된 임시수복물의 수직고경과 중심위를 이전하여 최종수복물을 디자인 및 제작 하였다. 디지털 기술을 활용하여 환자의 수직고경과 교합을 보전하는 방법을 사용함으로써 무치악환자에서 복잡할 수 있는 임플란트 치료의 간단한 프로토콜을 정립하였기에 보고하는 바이다.

• 대한치과보철학회지
• /
• 제54권4호
• /
• pp.431-437
• /
• 2016

광범위한 보철 수복에서 교합접촉의 재설정이 필요한 경우가 많이 있으며, 교합접촉은 보철물 성공의 필수요소이다. 만약 교합접촉 관계가 잘못 부여된다면 다양한 교합외상의 증상이 발생할 수 있으며, 악관절 장애도 그 중 하나이다. 이런 악관절 장애의 흔한 증상의 하나로 저작근 장애 및 악관절 부위 통증이 발생될 수 있으며 이는 환자에게 많은 고통을 준다. 본 증례는 보철물의 잘못된 교합접촉으로 인한 지속적 악관절 통증을 가진 환자에서 교합 재설정한 보철물로 재수복하여 저작근 및 악관절 통증이 개선되는 등의 만족스러운 결과를 얻어 이를 보고하는 바이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권3호
• /
• pp.740-753
• /
• 2023

Text recognition in natural scene images is a challenging problem in computer vision. The accurate identification of ship number characters can effectively improve the level of ship traffic management. However, due to the blurring caused by motion and text occlusion, the accuracy of ship number recognition is difficult to meet the actual requirements. To solve these problems, this paper proposes a dual-branch network based on the CRNN identification network. The network couples image restoration and character recognition. The CycleGAN module is used for blur restoration branch, and the Pix2pix module is used for character occlusion branch. The two are coupled to reduce the impact of image blur and occlusion. Input the recovered image into the text recognition branch to improve the recognition accuracy. After a lot of experiments, the model is robust and easy to train. Experiments on CTW datasets and real ship maps illustrate that our method can get more accurate results.

• 구강회복응용과학지
• /
• 제26권4호
• /
• pp.477-482
• /
• 2010

다수 구치부 상실을 가진 환자의 경우 상실 공간으로 대합치의 정출 및 잔존 전치부 저작으로 인한 교합 외상이 발생한다. 대합치의 정출로 인해 교합 평면이 붕괴되고 구치부 지지 상실로 잔존 치아의 심한 마모를 보이게 된다. 이 경우 보철 수복 공간을 확보하고 교합 평면을 바로잡기 위해서 최소한의 수직 고경을 높여 잔존 치아와 상실된 치아 부위의 수복치료가 필요하게 된다. 본 증례의 환자는 다수 구치 상실로 인한 저작 곤란 및 마모된 전치로 인한 심미적 문제로 내원한 환자이다. 보철 수복을 위한 치아 삭제 전 가역적인 거상 장치를 2개월간 사용한 뒤, 비가역적인 치아 삭제 후 임시 수복물을 3개월간 사용하여 총 5개월간 최종 수복물에 대한 적응 여부를 관찰하였다. 수직 고경 거상량은 3mm로 비교적 작은 양이었고 저작계가 증가된 수직 고경에 대해 특별한 병적 변화 없이 적응하였다. 최종 수복물은 중심 교합시 전체 치아가 균등하게 접촉하고 측방운동시 견치에 의해 즉각적으로 이개되도록 하였으며 금속 교합면를 부여하여 장기적으로 과도한 근육 활성 및 교합 외상, 도재의 파절을 방지하고자 하였다. 이상의 치료를 통해 교합 붕괴 환자를 안정적인 보철 수복물로 재건한 치험예를 보고하고자 한다.