• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.3
• /
• pp.222-228
• /
• 2006

Various methods have been used in the past to indirectly analyze the craniofacial region. Among these, the lateral and posterior-anterior cephalometircs are used for the evaluation of the dentofacial deformities. However, cephalometircs create inaccuracies because of the inherent enlargement and distortion of the image. The interpretation of cephalometric films is also problematic: the number of anatomic landmarks that can be identified accurately is limited, and the overlap of structures on a radiograph making locating these landmarks difficult. To overcome these problems, computed tomography(CT) has been recommended as an useful modality in the diagnosis, surgical planning, and follow-up of craniofacial anomalies. There is no significant enlargement or distortion of the image, overlap of structure, or tracing error. And the number of anatomic landmarks is vast. The purpose of this study was to examine the orbit and midfacial region using Occlusal Maxillary CT, consisted of slices parallel to the occlusal plane. Based on these CT scan, we provide the data that could be applied to monitor an individual patient's skeletal pattern and the guide to the maxillary osteotomy.

• Journal of Oral Medicine and Pain
• /
• v.13 no.1
• /
• pp.23-33
• /
• 1988

The purpose of this study was to standardized and classify the coordination pattern among the chewing side and non-chewing side masseter and anterior muscles, in terms of EMG values on lateral excursion, clenching, and mastication in presence of the non-chewing side. In this study, 25 subjects were selected for experiment of lateral excursion, clenching and mastication and EMG value of the masseter and anterior temporal muscle on both sides were recored 2 times respectively. The bioelectric processor model EM2(Myo-tonic research, INC. U.S.A.) with the surface electrodes were used to record the EMG activity during all experimental procedures. The results were as follows : 1. During lateral excursion on intereference of non-chewing side, the EMG values of the temporal muscle were significantly more prominent than those of the temporal muscle on the non-chewing side. The EMG values of non-chewing side were significantly more prominent than those of chewing side on the both side masseter muscle and those of chewing side were significantly more prominent than those of non-chewing side on the both side temporal muscle. 2. During clenching on the occlusal interferance, the EMG values of non-chewing side masseter muscle were most prominent. 3. During mastication on the occlusal interferance, the EMG values of the chewing side temporal muscle were most prominent and those of non-chewing side temporal muscle were the lowest. 4. The EMG values of temporal muscle of non-chewing side on interferance were significantly more prominent than those of canine guidance during lateral excursion. 5. During clenching on the occlusal interferance, the EMG values of the masseter and the temporal muscles of the non-chewing side were significantly more prominent than canine guidance, but those of chewing side temporal muscle on canine guidance were significantly more prominent than those of interferance. 6. During mastication on canine guidance, the EMG Values of the temporal muscle on the chewing side, the masseter muscle on the chewing side and the temporal muscle on the non-chewing side were more prominent than those of interferance, but temporal muscle of non-chewing side was not different between canine guidance and occlusal interferance on non-chewing side.

• Imaging Science in Dentistry
• /
• v.54 no.3
• /
• pp.251-256
• /
• 2024

Purpose: This study was performed to investigate the pattern of condylar pressure distribution in the discs of a patient diagnosed with disc displacement without reduction. Materials and Methods: This research consisted of a pre- and post-test observational clinical study. A patient diagnosed with disc displacement without reduction underwent treatment with an occlusal splint for 3 months. Finite element analysis employed a 3-dimensional model constructed from magnetic resonance images of the patient, taken both before the application of the splint and 3 months after its use. Results: The post-test model demonstrated a decrease in condylar pressure on the disc, with measurements dropping to 72 MPa from the pre-test level of 143 MPa. In the pre-test, the pressure distribution pattern was concentrated on the lateral posterior border, whereas in the post-test, it shifted toward the intermediate zone of the disc. Conclusion: Utilization of a stabilization splint for 3 months resulted in decreased pressure and a marked change in the pressure distribution pattern on the temporomandibular disc.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.112-120
• /
• 2020

Purpose: The purpose of this study was to compare the biomechanical outcome in the mandibular posterior region between two different loading conditions by finite element analysis. Materials and Methods: The mandibular posterior teeth model and the implant model were generated for the study. And 2 different types of loading conditions were provided: Arbitrary occlusion and natural occlusion obtained from the digital occlusal analyzer, Accura (Accura, Dmetec Co. Ltd., Seoul, Korea). Total load of 100 N was evenly distributed over arbitrary occlusion points, and 100 N load was differentially distributed over natural occlusion points according to Accura data. The biomechanical outcome was evaluated by the finite element analysis software. Results: The result of finite element analysis showed considerable difference in both von Mises stress pattern and displacement under different loading conditions. Conclusion: In finite element analysis, it is recommended to simulate a realistic occlusal loading pattern that is based on accurate measurement.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.1-12
• /
• 1995

The purpose of this study was to predict the respose to the chincap therapy from the initial cephalometric measurements and to obtain the indication of chincap therapy. 40 patients selected for this study were classified into two groups by the occlusal stability after completion of permanent dentition and the improvement of facial profile, after chincap therapy. One was good response group which consisted of 25 children and the other was poor response group with 15 patients. Various measurements of the craniofacial structure in the initial lateral cephalogram were calculated and analyzed by t-test and discriminant analysis. The results were as follows: 1. Good response group had more horizontal growth pattern in initial stage of treatment, and the contributing measurements were $Bj\ddot{o}rk$ sum anterior-posterior facial height ratio, genial angle, lower genial angle and occlusal plane to AB plane angle. 2. The critical points and predictive values of the influential skeletal measurements were calculated. 3. The discriminant function was obtained from three major influential measurements; $Bj\ddot{o}rk$ sum, genial angle and occlusal plane to hn plane angle, and this function could discreminate correctly in $85\%$ of this samples.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.113-125
• /
• 1988

This study was attempted to individualize upper and lower incisor position appropriate to individual characteristic dento-facial pattern. Lateral cephalometric radiographs of 75 Korean adults with normal occlusion and good facial profile whose ages were over 17 years were traced, digitized, and statistically analysed. The results of this study were as follows; 1. All cephalometric measurements of incise. position and dento-facial pattern for normal occlusion showed wide range of variation. 2. There were no significant differences of incisor position between males and females. 3. Lower incisor position was highly correlated with ANB, N-A-Pog and SN/Mand. pl. angle and upper incisor position, with ANB, N-A-Pog and SN/Occ. pl. angle. 4. Multiple regression equations were established to individualize incisor position appropriate to individual characteristic dento-facial pattern. ANB and N-A-Pog angle were selected as the significant guiding variables affecting upper and lower incisor position. 5. Lower incisor position such as $\bar{1}$ to SN, $\bar{1}$ to occlusal plane and $\bar{1}$ to NPog(mm) and upper incisor position such as $\underline{1}$ to SN, $\underline{1}$ to palatal plane, $\underline{1}$ to NA, $\underline{1}$ to NA (mm) and $\underline{1}$ to NPog(mm) could highly predicted from the variables of dento-facial pattern.

• Journal of Oral Medicine and Pain
• /
• v.18 no.1
• /
• pp.55-62
• /
• 1993

The author has synchronously recorded the average electromyographic activities of the sternocleidomastoid muscles, the anterior temporal muacles and the masseter muscles. The marious levels of occlusal force were checked during clenching the resin plates which are made to fit each of the maxillary and the mandibular teeth. These activities were recorded in order to study the EMG activity pattern of the sternocleidomastoid muscle during the masticatory function of the jaw in 11 healthy subjects. The obtined results were as follows : 1. The electromyographic activities of the sternocleidomastoid muscles, the anterior temporal muscles and the masseter muscles were increased as the occlusal force increased, and the sternocleidomastoid muscles have a lineal correlationship with the occlusal force. 2. The sternocleidomastoid muscles and the masseter muscles showed higher EMG activity during clenching at the ventroflexed head position rather than at the extended head position. (p<0.05) However the EMG activities of the anterior temporal muscles showed no difference between the ventroflexed position and the extended position of the head. 3. The electromyographic activities of the sternocleidomastoid muscles, the anterior temporal muscles and the masseter muscles during clenching are similar at the habitual position and at the retruded condylar position. 4. The electromyographic activities of the sternocleidomastoid muscles, the anterior temporal muscles and the masseter muscles on the working side during mastication of gum and almonds are significantly higher than on the balancing side except the masseter muscles during mastication of almonds. (p<0.05, P<0.01) 5. The asymmetry of gum are lower than that during mastication of almonds. (p<0.05) The asymmetry indices of the sternocleidomastoid muscles are higher than those of the anterior temporal muscles and masseter muscles.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.328-342
• /
• 1999

This study was performed to investigate the factors related to tooth wear. For this study, 78 patients with temporomandibular disorders and 76 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Preferred chewing side, Angle's classification, lateral guidance pattern, head and shoulder posture were observed clinically. Electromyographic activity of anterior temporalis and masseter muscle were recorded with $BioEMG^{(R)}$ and occlusal status were recorded with $T-Scan^{(R)}$. Wear facet area of each tooth was measured from working model of upper arch corresponding to the occlusal status from T-Scan. Wear facet area were measured with planimeter in $mm^2$. Total area were divided into incisal, canine, posterior tooth area. Anterior wearfacet area was incisor area plus canine area, and unilateral area was anterior area plus posterior area. The data collected were analyzed by SAS statistical program and the results of this study were as follows: 1. There was no significant difference between the two groups in total werafacet area, and male subjects showed tendency to have larger area in the normal group but female subjects showed tendency vice versa. 2. There was no significant difference related to preferred chewing side and Angle's classification, however some difference was observed by lateral guidance pattern. Anterior wear facet area in subjects of canine guidance was the largest in the three subgroups. 3. Subjects with head tilting to right side had larger posterior and total area, and subjects with higher shoulder in right side had larger canine and anterior area than any other subgrous. 4. Electromyographic activity of masseter muscle was more correlated with wear facet area than anterior temporalis muscle, and tooth contact number and force were significantly correlated with wear facet area, but the most important factor affecting tooth attrition was age.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.31-43
• /
• 1983

The following results were abtained based on the research of the occlusal patterns among 1074 handicapped persons (cerebral palsy: 46, mental subnormality: 619, deafmute: 285, blind: 111, childish autism:8, cleft lip and cleft palate:3, polimyelitis:2) of the age between 6 and 23 in Chollanamdo, Korea, in comparison with a normal group of 1048 children of the age between 6 and 15 selected at random in J primary school in Gwang-ju City. 1. According to Angle's malocclusion classification, all the handicapped groups, except the cerebral palsy and the blind, showed a higher prevalence of malocclusion than that of the normal. Especially the prevalence of Class II, devision 1 malocclusion in the cerebral palsy was the highest, and the prevalence of Class III malocclusion in all the handicapped groups was higher than that of the normal group. Among these groups the highest prevalence of Class III malocclusion was in the Down's syndrome group. 2. On the the abnormal pattern of the anterior region, there was no significant difference $(P\leqq0.05)$ between the normal and the cerebral palsy, the deafmute, and e blind. The open bite $(7.27{\pm}1.04\%)$ and the cross-bite $(32.7{\pm}6.33\%)$ of the Down's syndrome wire higher than that of the normal, and the forward position of the mandible could be recognized in the Down's syndrome group. 3. On the midline position of the dentition, all the handicapped showed the same percentage of deviation, but the degree of mandibular shift to the right $(20.00{\pm}5.39\%)$ or left $(10.91{\pm}4.20\%)$ was higher than that of the normal only in the Down's syndrome group. 4. On the abnormal pattern of the posterior region, the cross-bite of the Down's syndrome was higher than that of the normal by $20.00{\pm}5.39\%$, the cross-bite of the cerebral palsy and the cross-bite and the open bite of the mental subnormality were slightly higher than that of the normal. The other handicapped groups showed no significant difference $(P\leq0.05)$ to the normal.