• 한국농공학회지
• /
• 제30권3호
• /
• pp.95-105
• /
• 1988

This study refers to the development of a hydrologic model simulating daily inflow and release rates for irrigation reservoirs. A daily - based model is needed for adequate operation of an irrigation reservoir sufficing the water demand for paddy fields which is closely related to meteorological conditions. And the objective or this study is to develop a Daily Irrigation Reservoir Operation Model(DIROM) combining the inflow and the release models which depicts the daily water level fluctuations of an irrigation reservoir, and to evaluate the applicability of the model. DIROM was applied to four reservoirs and daily water levels were simulated and compared to the observed data. The model behaviour was also compared with that of a ten - day based model, Reservoir Operation Study(ROS) which has been applied for determining the design capacity of reservoirs. Various combinations of measured and simulated inflow and release rates for tested reservoirs were used to define the daily water level fluctuations. Simulated release rates and measured inflow data resulted in larger errors, and simulated inflow and release rates produced the smallest errors in water level comparison. Two resevoir operation models, DIROM and ROS were applied to the same reservoir and the simulation results compared. The computational errors of DIROM ware smaller than those of ROS, and DIROM was more sensitive to meteorological conditions. DIROM demonstrated its potenial applicability in water management and operation.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.605-613
• /
• 2014

Scanning white-light interferometry is an important measurement option for many surfaces. However, serious profile measurement errors can be present when measuring free-form surfaces being highly curved or tilted. When the object surface slope is not zero, the object and reference rays are no longer common path and optical aberrations impact the measurement. Aberrations mainly occur at the beam splitter in the interference objective and from misalignment in the optical system. Both effects distort the white-light interference signal when the surface slope is not zero. In this paper, we describe a modified version of white-light interferometry for eliminating these measurement errors and improving the accuracy of white-light interferometry. Moreover, we report systematic errors that are caused by optical aberrations when the object is not flat, and compare our proposed method with the conventional processing algorithm using the random ball test.

• 대한치과교정학회지
• /
• 제42권6호
• /
• pp.297-306
• /
• 2012

Objective: This in vitro study was undertaken to evaluate the physical, chemical, and biological properties of commercially available metal orthodontic brackets in South Korea, because national standards for these products are lacking. Methods: Four bracket brands were tested for dimensional accuracy, (manufacturing errors in angulation and torque), cytotoxicity, composition, elution, and corrosion: Archist (Daeseung Medical), Victory (3M Unitek), Kosaka (Tomy), and Confidence (Shinye Odontology Materials). Results: The tested rackets showed no significant differences in manufacturing errors in angulation, but Confidence brackets showed a significant difference in manufacturing errors in torque. None of the brackets were cytotoxic to mouse fibroblasts. The metal ion components did not show a regular increasing or decreasing trend of elution over time, but the volume of the total eluted metal ions increased: Archist brackets had the maximal Cr elution and Confidence brackets appeared to have the largest volume of total eluted metal ions because of excessive Ni elution. Confidence brackets showed the lowest corrosion resistance during potentiodynamic polarization. Conclusions: The results of this study could potentially be applied in establishing national standards for metal orthodontic brackets and in evaluating commercially available products.

• 성인간호학회지
• /
• 제27권1호
• /
• pp.1-10
• /
• 2015

Purpose: The objective of this study was to examine patient safety culture (PSC) and patient safety initiatives (PSI) according to IT-based medication errors prevention system which is constructed in this study, and to identify the relationships among system construction, perception to the usage, PSC and PSI. Methods: The subjects were 180 nurses who work at 12 different hospitals with over 300 beds. The questionnaire included the characteristics of participants, a system construction status, the perception to the usage using electric pharmacopoeia (EP), a drug dose calculation system (DDCS), a patient safety reporting system (PSRS) and a bar-code system (BS). The data were collected from July 2011 to August 2011. Descriptive statistics, ANOVA, Pearson correlation and MANOVA were used for data analysis. Results: Systems were constructed in participating hospitals; For EP and PSRS, 83.9%, DDCS, 50%, and BS, 18.3%. The perceptions on the usage of the system were marked highest in BS as 4.54 followed by EP as 3.85. There were significant positive correlations between PSI and EP construction (r=.17, p=.028); PSRS (r=.17, p=.028) and DDCS (r=.23, p=.002). Conclusion: The developed system for improving the user experiences and reducing medication errors was found out well accepted. It is hoped that the system is helpful for PSC and PSI improvement in clinical settings.

• 대한산업공학회지
• /
• 제27권1호
• /
• pp.1-10
• /
• 2001

In the reverse engineering, surfaces are modeled for new products by interpolating the digitized data points obtained by measuring the existing shapes. However, many measuring or deviation errors are happened during the measuring process. If these errors are ignored, designers could get undesirable results. Therefore, it is important to handle such errors and fairing procedure with the esthetics criteria is needed during surface modeling process. This paper presents algorithms for the fairing of B-spline surfaces. The algorithms are based on automatic repositioning of control points for B-spline surfaces. New positions of the control points are determined by solving a non-linear programming of which the objective functions are derived variously using derived surfaces and constraints are established by distance measures between the original and the modified control points. Changes in surface shapes are analyzed by illustrations of their shapes and continuous plotting of gaussian and mean curvatures.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.123-130
• /
• 2010

Electroencephalogram(EEG) would be the most objective psychophysiological research technique on human errors though few research has been taken yet. This study aimed to get characteristics of human error while committing simple Odd-Ball tasks by utilizing the power spectrum technique of EEG data. Each experiment was composed of 3 tasks with different rules, and 8 young undergraduate students participated in this study as paid subjects. The result showed in the affirmative that subject and the interaction of subject and task factors were statistically significant on variation of $\alpha$ band power $P_{\alpha/(\alpha+\beta+\theta)}$ and $\beta$ band power $P_{\beta/(\alpha+\beta+\theta)}$, and that the former increasing in backward direction to Pz reflects compatibility whereas the latter increasing in forward direction to Fz reflects familiarity. Therefore it was coucluded that, since task 2 carried out in the present research requiring decoding process would be more difficult to human beings than the task merely requiring psychological recall process, task 1 and task 3 were classified into a homogenious group excluding task 2, and the ratio $\alpha$ band power to $\beta$ band power indicated enormous increase of $\alpha$ band power relative to $\beta$ band power in the cases of contra-lateral errors, especially in task 2.

• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.74-86
• /
• 2012

For the improvement of environmental comfort in the buildings with the blind control, the objective of this study is to prevent the direct glare caused by the daylight inlet. During the process of solar profile prediction, time are significant factors that may cause error and glare during the blind control. This research proposes and evaluates the correction and control method to minimize prediction error. For the local areas with different longitude and local standard meridian, error occurred in the process of the time conversion from local standard time to apparent solar time. In order to correct error in time conversion, apparent solar time should be recalculated after adjusting the day of year and the equation of time. To solve the problems by the potential time errors, control method is suggested to divide the control sections using the calibrated fitting-curve and this method is verified through simulations. The proposed correction and control method, which considered potential time errors by loop lop leap years, could solve the problems about direct glare caused by daylight inlet on the work-plane according to the prediction errors of solar profile. And also these methods could maximize daylight inlet and solar heat gain, because the blocked area on windows could be minimized.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.961-969
• /
• 2004

Most manufacturing companies are trying to develop a competitive product by increasing the quality, shortening time to market and reducing the cost of a product. Collaborators related to the development of a new product want to confirm geometric forms and dimensions during the design process, as well as to verify dimensional errors of a product during the fabrication process. Objective of this paper is the development of a collaborative design and dimension verification system on the Internet. STEP files obtained from the design process are used for the design and dimension verification. Functions of the design and dimension verification modules are constructed over the ActiveX control using the visual C/sup ++/ and OpenGL. By using mark up functions over the Internet, collaborators check geometries, interferences, dimensional errors, human factors and form errors, as well as share their design ideas and opinions with XML rapidly and remotely. The usefulness of the developed system is confirmed through case studies.

• 대한불안의학회지
• /
• 제11권1호
• /
• pp.33-37
• /
• 2015

Objective : Impaired response inhibition has been suggested to play an important role in the pathophysiology of obsessive-compulsive disorder (OCD). The aim of this study was to evaluate the response inhibition in patients with OCD, by using the Go/NoGo paradigm, and to better understand its associations with clinical symptoms. Methods : The participants included 63 OCD patients and 80 healthy volunteers matched in age and sex. response inhibition was evaluated using computerized Go/NoGo task, in which their commission error rates, omission error rates, and mean response times were measured. The severity of clinical symptoms in the OCD patients was assessed using Montgomery-Asberg Depression Scale and Yale-Brown Obsessive Compulsive Scale. Result : OCD patients showed significantly impaired inhibition and higher omission errors rates despite their slower response time, compared to normal controls. Clinical symptoms were not correlated with commission errors and omission errors. Conclusion : The present results indicate that impairment in response inhibition may play a critical role in the pathophysiology of OCD as a trait. These findings suggest that deficit of response inhibition may contribute to developing and maintaining clinical symptoms such as compelling need to repeat certain actions in patients with OCD.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.374-380
• /
• 2012

In guided missile systems, reducing terminal-position error is the primary objective of the inertial navigation system. As a seeker is used to sense and track a target, the critical function of the inertial navigation system is to provide the seeker with accurate missile attitude information and help the seeker to keep tracking a target continuously. As inertial sensor body and missile body alignment errors are taken into account, it is desirable to minimize the alignment errors between the missile seeker and the attitude of inertial navigation system. Among the alignment errors, this paper addresses the methods of measuring and compensating misalignment between inertial sensor body and housing frame and shows test results of several experiments.