• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.127-136
• /
• 2003

Road safety is defined under the minimum design standard and design examination process is consisted of the standard according to current road design. However, road safety in practical way is correlative to not only all element of roads but also road shape, such as, between straight line and curved line and between curved lines. Also. it is related to alignments such as horizontal alignment and vertical alignment, and cross section. That is, the practical road design should be examined in both sides of 3 dimension and consecutiveness (consistency) as the actual road is a 3 - dimensional successive object. The paper presents a concept for acceleration to evaluate consistency of road considering actual road shape on 3-dimension. Acceleration of vehicle is influential to road consistency based on running state of vehicles and state of drivers. The magnitude of acceleration. especially, is a quite influential element to drivers. Based on above, the acceleration on each point on 3-D road can be calculated and then displacement can be done. Computation of acceleration means total calculation on each axis. Speed profile refers to “Development of a safety evaluation model for highway horizontal alignment based on running speed(Jeong, Jun-Hwa, 2001)” and then acceleration can be calculated by using the speed pronto. According to literature review, definition of acceleration on 3-D and g-g-g diagram are established. For example, as a result of the evaluation, if the acceleration is out of range, the road is out of consistency. The paper shows calculation for change of acceleration on imaginary road under minimum design standard and the change tried to be applied to consistency. However accurate acceleration is not shown because the speed forecasting model is limited and the paper did not consider state of vehicles (suspension, tires and model of vehicles). If speed pronto is defined exactly, acceleration is calculated on all road shapes, such as. compound curve and clothoid curve. and then it is appled to consistency evaluation. Unfortunately, speed forecasting model on 3 -D road and on compound curves have rarely presented. Speed forecasting model and speed profile model need to be established and standard of consistency evaluation need to developed and verified by experimental vehicles.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.37-46
• /
• 2007

In this paper, we propose technologies for enhancing the immersive realization of virtual objects in AR-based product design. Generally, multimodal senses such as visual/auditory/tactile feedback are well known as a method for enhancing the immersion in case of interaction with virtual objects. By adapting tangible objects we can provide touch sensation to users. A 3D model of the same scale overlays the whole area of the tangible object so the marker area is invisible. This contributes to enhancing immersion. Also, the hand occlusion problem when the virtual objects overlay the user's hands is partially solved, providing more immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In our work, both vibrotactile feedback through page motors, pneumatic tactile feedback, and sound feedback are considered. In our scenario, a game-phone model is selected, by way of proposed augmented vibrotactile feedback, hands occlusion-reduced visual effects and sound feedback are provided to users. These proposed methodologies will contribute to a better immersive realization of the conventional AR system.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.453-463
• /
• 2008

The missing child problem is no more a personal problem. It became a social problem that all parents must consider. To this, this study applies USN/RFID technology integrated with GIS for the prevention of missing child. Although RFID is not designed for location sensing, but now it is regarded as a device to facilitate real time location awareness. Such advantages of RFID can be integrated with 4S(GIS/GPS/LBS/GNSS) achieving much synergy effects. In order to prevent kidnapping and missing child, it is necessary to provide a missing child preventing system using a ubiquitous computing system. Therefore, the missing child preventing system has been developed using high-tech such as RFID, GPS network, CCTV, and mobile communication. The effectiveness of the missing child prevention system can be improved through an accurate location tracking technology. This study propose and test a location sensing system using the active RFID tags. This study verifies technical applied service, and presents a system configuration model. Finally, this paper confirms missing child prevention system utilization possibility.

• Journal of Korean Academy of Nursing Administration
• /
• v.4 no.2
• /
• pp.439-455
• /
• 1998

This is the descriptive investigation study intended to provide basic informations to develop concrete method of nurse arbitration which can improve the quality of nursing care on family by investigating and analyzing the perception and practice on family nursing of clinical nurse. 332 nurses working in 4 university hospitals in Seoul have been the object and the collection of data have been conducted by visiting cooperated by the department of nursing in university hospital from April 4th through April 17th 1998. The measuring instrument of the perception and the practice on family nursing which was written by the researcher was used based on the family nursing arbitration by recently amending Calgary Family Arbitration of the Model of Wright & Leahey. Cronbach's a value of this instrument was .9288 in the perception and .9168 in the practice the collected data have been analyzed by frequency percentage, averaged value. t-test, F-test(ANOVA), Duncan's Multiple Range, Pearson's Correlation Coefficient, and the results are as the follows: 1. The perception on patient's family nursing of clinical nurse showed comparatively high by 3.22 in average(maximum 3.52, minimum 2.82) on the basis of 4 point but the practice showed low by average 2.47(maximum 3.02, minimum 2.11), By providing the patients and their family with "The information about the health problem of the which is the role of giving explanation and information about the disease. the nurse presents the method of their helping patient and in case that the family lack of knowledge about the health problem and crisis of the patient which is the role of education about the method of solving the crisis and change. the nurse educates about the necessity and method of taking care of the crisis and the changes. The third question that the relation of recognizing the difficuly of family and cooperating with them in supporting the patient for mutual function is to be formed showed high in the degree of perception and practice of the necessity. 2. General characteristics of perception about patient's family nursing of the object showed no significant difference except the concerns about the family usually(F=5.472. p<.001) and general characteristics which showed significant difference in the degree of practice were educational background (F=3.177, p<.05), clinical experience (F=2.462, p<.05) and position(F=7.029. p<.001), and attention about patient's family(F=10.603, p<.001), 3. The relation between perception and practice about the nursing on patient's family showed pure correlation but the degree was very low(r=.188, p<.05). The above results showed that the clinical nurses has been high understanding about the necessity of patient's family nursing but the degree of practice has been very low due to the lack of education about the family nursing, having no ways of nurse arbitration for practical duty and lack of political administrative support. Therefore concrete and systematic family situation and arbitration method to be applied clinically are required to be developed and also the education about patient's family nursing and the development of the course for clinical practice are required and political and administrative support for clinical practice about patient's family nursing is required as well.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.2
• /
• pp.93-107
• /
• 2005

Purpose: The purpose of this study is to identify the trends of studies on work-related musculoskeletal disorder and to suggest the direction of future research. Method: 144 research thesis for a degree on work-related musculoskeletal disorder were systematic reviewed and published from Jan. 1990 to Mar. 2005. The analyzed using descriptive statistics, an actual number, percentage. Result: As its result the work-related musculoskeletal disorder research which is announced from domestic the doctorate dissertation at the 2004 year 42 the most many 144 dissertation middle most to be 129 in master degree dissertation was 15 in Ph D degree. Dissertation contents character the contents against the result relation that it analyzes especially and a condition and an obstacle was many most at 84. Research plan in most description investigation research 121 the dissertation field to be the especially public health (hygiene, industry and environment) at this 57 most many research object person distribution manufacturing industry in the research object one dissertation was many most at the 40. The tools which are used in each measurement in the question tool which it uses most the question price of land which uses the condition investigation ticket which it made from the NIOSH and the ANSI most many 33, the hazard which analyzes a work attitude in the tool which it uses the RULA was many most at 14. In the stress test tool social psychological healthy measurement PWI (Psychological Wellbeing Index) the dissertation which uses the Job Strain of the Karasek Model to be many most at 19 PWI (Psychological Wellbeing Index) 7 easy use. Work-related musculoskeletal disorder measurement hazard in physiological index and the machinery and tools which it uses there were 9 researches to use an electromyogram most plentifully. With the effect goes to a work-related musculoskeletal disorder they are 33 where the age is many most from general quality. From healthy act with the relation of smoking the year to be many from 16 dissertations. Work of the corpse an attitude (the attitude which is inappropriate) with 5 and the work market the work burglar is many most at 9, the society-support of 36 where the stress is many psychologically most, the stress and service also the most many duty discretion (authority and autonomy) is 6 at the duty demand boat song 9. The service career to be many is 22 of extraordinarily with relation of service. Conclusion: It is recommended the research which it sees being limited in only domestic thesis for a degree the international comparative study to become accomplished. It comes to think with the fact that it will be necessary to make the protocol which it conforms in the civil official guide the test researches for the protocol or arbitration program which is standardized are necessary. Prevention and the civil official of work relation bones and sinews standing total disease hazard scientific base one program is necessary with base.

• Journal of KIISE:Software and Applications
• /
• v.34 no.4
• /
• pp.328-341
• /
• 2007

When the decision to initiate a software product line has been taken, the first step is the domain analysis describing the variability in the requirements, the second important step is the definition of a domain architecture that captures the overall structure of a series of closely related products. A domain architecture can be a core asset in product line by describing the commonalities and variabilities of the products contained in the software product line. The variabilities, which are identified at each phase of the core assets development, are diverse in the level of abstraction. Therefore, it is important to clearly define, systematically identify, and explicitly represent variability at the architectural level. However, it is difficult to identify and represent the variability which should be considered at the architecture level, because these may be appeared in architecture elements and in architecture configuration. In this paper, we suggest a method of developing domain architecture as a core asset in product line where commonality and variability are explicitly considered. First of all, we will describe a domain architecture metamodel that can explicitly define commonality and variability concepts by extending the Object Management Group's ($OMG^{TM}$ Reusable Asset Specification eRAS) model. Using the domain architecture metamodel, architecture elements are defined and the variations that can be identified at the architecture level are classified into two types in according th abstract level. Additionally, we describe a domain architecture where commonality and variability are explicitly considered on basis of this metamodel.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.333-340
• /
• 2017

Timelapse is an imaging technique that captures motion at regular intervals and then projects it at normal speed. We looked at Timelapse advertising images of global brands and presented a model for analyzing components and expression methods of Timelapse, a new image technique. In previous research, literature research, Internet data survey, and YouTube data were investigated. Continuous photography has been developed as an imaging technique, and we have examined the current production status applied to domestic and foreign documentary, domestic and foreign drama, film, and advertisement. In 2015-2016, I will analyze the techniques of iPhones (2016), Ralph Lauren Polo Ads (2015), and Canon EOS (2013) videos that use Timelapse techniques in their recent advertisements. The results show that the Timelapse component is a static element, the static motif is mainly an artificial structure, the place is outdoor, the color is taken at a time showing the characteristics of the place, and the layout is all centered. The dynamic motif is a moving object. The dynamic line consists of a story based on the object. The time is about 11-15 seconds, the longest is about 1 minute and 30 seconds, and the editing is mainly focused on the product with the brand logo emphasized. In conclusion, it is the role of the image to pay attention to the advertisement and catch the eye. In order to motivate the buyer's mind, it is necessary to direct and edit such as Timelapse, which stimulates the emotions inherent in the mind and stimulates the non-verbal symbols. Future research is likely to reveal various attempts at temporal editing of images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2013

Due to the increased interest in global warming, interest in forest resources aimed towards reducing greenhouse gases have subsequently increased. Thus far, data related to forest resources have been obtained, through the employment of aerial photographs or satellite images, by means of plotting. However, the use of imaging data is disadvantageous; merely, due to the fact that recorded measurements such as the height of trees, in dense forest areas, lack accuracy. Within such context, the authors of this study have presented a method of data processing in which an individual tree is isolated within forested areas through the use of LIDAR data and ortho-images. Such isolation resulted in the provision of more efficient and accurate data in regards to the height of trees. As for the data processing of LIDAR, the authors have generated a normalized digital surface model to extract tree points via local maxima filtering, and have additionally, with motives to extract forest areas, applied object oriented image classifications to the processing of data using ortho-images. The final tree point was then given a figure derived from the combination of LIDAR and ortho-images results. Based from an experiment conducted in the Yongin area, the authors have analyzed the merits and demerits of methods that either employ LIDAR data or ortho-images and have thereby obtained information of individual trees within forested areas by combining the two data; thus verifying the efficiency of the above presented method.

• Communications of Mathematical Education
• /
• v.20 no.3 s.27
• /
• pp.425-441
• /
• 2006

Entering upon 21th, the internet which bring the digital era, are changing the paradigm of education and cultivating creative and challenging person, which is the core of competitive power in knowledge-information society, is more emphasized than ever. To meet the needs of the present times, it has been concentrating its effort to improve learning-environment using e-Learning in the field of teaching. E-schoolbooks that were introduced recently by way of showing an example are representative case of this intention. Though many e-learning contents are being developed, the more speedily a society grow, the shorter the life of contents are. Moreover, the contents developed are impossible to use directly for tele-education system, so standard types adjusted for various kind of system are showing up. Among them the leading standard type is SCORM(Sharable Content Object Reference Medel) made in ADL(Advanced Distributed Learning) Corporation. The KERIS' Cyber Home Education System adopted this and is using it. So, in this study, we set the goal at designing and developing an e-learning contents and an experiment-focused mathematics that suit the KERIS' Cyber Home Education System on the basis of SCORM.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.95-102
• /
• 2007

This paper presents the core technology of Construction Business Process Automation to model and automate construction business processes. Business Process Reengineering (BPR) and Automation (BPA) have been recognized as one of the important aspects in construction business management. However, BPR requires a lot of efforts to identify, document, implement, execute, maintain, and keep track thousands of business processes to deliver a project. Moreover, existing BPA technologies used in existing Enterprise Resource Planning (ERP) systems do not lend themselves to effective scalability for construction business process management. Application of Workflow and Object Technologies would be quite effective in implementing a scalable enterprise application for construction business processes by addressing how: 1) Automated construction management tasks are developed as software components, 2) The process modeling is facilitated by dragging-and dropping task components in a network, 3) Raising business requests and instantiating corresponding process instances are delivered, and 4) Business process instances are executed by using workflow technology based on real-time simulation engine. This paper presents how the construction business process automation is achieved by using equipment reservation and cancellation processes simplified intentionally.