• The Journal of Advanced Prosthodontics
• /
• 제3권2호
• /
• pp.85-89
• /
• 2011

PURPOSE. The purpose of this study was to evaluate the amount of resorption and thickness of labial bone in anterior maxillary implant using cone beam computed tomography with Hitachi CB Mercuray (Hitachi, Medico, Tokyo, Japan). MATERIALS AND METHODS. Twenty-one patients with 26 implants were followed-up and checked with CBCT. 21 OSSEOTITE $NT^{(R)}$. (3i/implant Innovations, Florida, USA) and 5 $OSSEOTITE^{(R)}$. implants (3i/implant Innovations, Florida, USA) were placed at anterior region and they were positioned vertically at the same level of bony scallop of adjacent teeth. Whenever there was no lesion or labial bone was intact, immediate placement was tried as possible as it could be. Generated bone regeneration was done in the patients with the deficiency of hard tissue using $Bio-Oss^{(R)}$. (Geistlich, Wolhusen, Switzerland) and $Bio-Gide^{(R)}$. (Geistlich, Wolhusen, Switzerland). Second surgery was done in 6 months after implant placement and provisionalization was done for 3 months. Definite abutment was made of titanium abutment with porcelain, gold and zirconia, and was attached after provisionalization. Two-dimensional slices were created to produce sagittal, coronal, axial and 3D by using OnDemand3D (Cybermed, Seoul, Korea). RESULTS. The mean value of bone resorption (distance from top of implant to labial bone) was $1.32 \;{\pm}\; 0.86\; mm$ and the mean thickness of labial bone was $1.91 \;{\pm}\; 0.45 \;mm$. CONCLUSION. It is suggested that the thickness more than 1.91 mm could reduce the amount and incidence of resorption of labial bone in maxillary anterior implant.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.672-686
• /
• 1999

The purpose of this study was to compare the casting problem and corrosion behavior in two types of HL Hexed abutments of the Steri-Oss system ; gold/plastic coping and gold coping. The anodic Polarization behavior, the galvanic corrosion between abutments and Type III gold alloys, before and after casting were analyzed, and the crevice corrosion of casting samples was analyzed with the CPPT test and the SEM. The results are as follows : 1. Anodic polarization behavior of samples ; Before casting, gold/plastic coping and gold coping was shown to have a similar corrosion pat-terns. Type III casting gold alloy was shown to have a lower corrosion potential and passivation film. Corrosion potential of the case of gold/plastic coping after casting was higher than that of gold coping, but the region of passivation film for gold/plastic coping was smaller than that of gold coping. 2. Galvanic corrosion behavior of samples ; Contact current density between casting gold alloys and gold/plastic before casting was higher than that between gold coping and casting gold alloy Galvanic corrosion of samples after casting was shown to have similar contact current density 3. Crevice corrosion behavior of samples ; Crevice corrosion resistance of casting sample using gold coping was lower than that of cast-ing sample using gold/plastic coping, and a severe corrosion pattern was observed at the abutment-casting gold alloy interface by the SEM.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권5호
• /
• pp.299-310
• /
• 2012

Purpose: The purpose of this study was to evaluate the histological healing process of 3 different types of xenogenic tooth bone graft material and xenogenic bone graft material. Methods: Three types of human tooth bone graft material (chips, crowns, and roots) and BioOss (Geistlich Pharma AG, Wolhausen, Switzerland) was filled at the preformed 4 round-shaped calvarial bone defects of beagle dogs. The beagles were sacrificed at 2, 4, 8, and 12 weeks, respectively, for radiological and histological evaluation. Results: Increased strength and radiopacity were detected in all graft material groups in time-dependent manner. New bone was formed and matured surrounding the graft material histologically. Also, a new bone was directly integrated with graft material. Conclusion: It was expected that newly developed tooth bone graft material would show good bone healing capacity if it was used as a graft material for the restoration of bony defect.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권4호
• /
• pp.1775-1781
• /
• 2014

Background: To assess the long term clinical outcome of preoperative radiotherapy with or without chemotherapy followed by limb sparing surgery in patients with non-metastatic soft tissue sarcomas (STS) of the extremities. Materials and Methods: Sixty patients with locally advanced STS were retrospectively analyzed. The median tumor diameter was 12 cm. All patients were treated with preoperative radiotherapy delivered with two different fractionation schedules (35Gy/10fr or 46-50Gy/23-25fr). Neoadjuvant chemotherapy was added to 44 patients with large and/or high grade tumors. Surgery was performed 2-6 weeks after radiotherapy. Chemotherapy was completed up to 6 courses after surgery in patients who had good responses. Results: Median follow-up time was 67 months (8-268 months). All of the patients had limb sparing surgery. The 5-year local control (LC), disease free (DFS) and overall survival (OSS) rates for all of the patients were 81%, 48.1% and 68.3% respectively. 5-year LC, DFS and cause specific survival (CSS) were 81.7%, 47%, 69.8%, and 80%, 60%, 60% in the chemoradiotherapy and radiotherapy groups, respectively. On univariate analysis, patients who were treated with hypofractionation experienced significantly superior LC, DFS and CSS rates with similar rates of late toxicity when compared with patients who were treated with conventional fractionation and statistical significance was retained on multivariate analysis. Conclusions: Treatment results are consistent with the literature. As neoadjuvant chemoradiotherapy provides effective LC and CSS with acceptable morbidity, it should be preferred for patients with large and borderline resectable STS.

• 한국인터넷방송통신학회논문지
• /
• 제15권2호
• /
• pp.15-21
• /
• 2015

EPUB 3.0 기반의 전자책 뷰어에 대한 호환성을 보장하기 위해 IDPF에서는 2012년 2월부터 Readium 이라는 명칭의 공개 프로젝트를 출범시키고 다양한 OS에서 구동될 수 있는 전자책 뷰어 표준 플랫폼 및 관련 SDK를 제공하고 있다. 그러나 현재 EPUB 표준에서는 전자책의 저작권 보호를 위한 DRM 기술의 표준이 마련되어 있지 않기 때문에 Readium SDK를 사용한다 하더라도 호환성을 보장할 수 없다. 이러한 이유로 Readium 프로젝트에서는 EPUB 표준과는 별개로 DRM 적용을 위한 표준 레퍼런스 S/W 설계 작업을 진행하고 있지만 이 역시도 복수 DRM에 대한 호환성 해결을 명확히 제시하지는 못하고 있다. 본 논문에서는 Readium SDK와 ContentMudule 기술을 기반으로 전자책 뷰어에 복수의 DRM 기술이 연동 가능한 호환성 모델을 제시한다.

• 한국잠사곤충학회지
• /
• 제36권1호
• /
• pp.53-57
• /
• 1994

견방사와 PET로 구성된 혼섬유 재료에 대해 여러가지 조건에서 알칼리 감량을 실시하여 감량율을 조사하고, 감량촉진제가 정련, 감량에 미치는 영향에 대해 검토한 결과를 요약하면 다음과 같다. 1) 감량촉진제와 농도 증가에 따라 견방사의 감량은 감소하여 강알칼리욕에서도 적당한 정도의 감량율을 얻을 수 있었다. 2) PET "A", "B"와 견방사로 된 혼섬유의 감량에서 견방사는 피브로인의 손상이 없는 정도의 적당한 감량이 얻어졌고, PET의 감량도 동시에 이루어 질 수 있었다. 3) PET "D", "E"와 견방사로 된 혼섬유의 감량에서, 견방사는 적당한 감량이 이루어 질 수 있었으나 PET의 감량율은 미미하였다. 4) 견방사와 PET로 된 교직물의 감량에 있어서, 견방사 분분은 전형적인 연감곡선 형태를 나타내 감량평형을 보였으나 PET는 처리시간의 경과에 따라 감량율이 계속해서 증가하였다. 보였으나 PET는 처리시간의 경과에 따라 감량율이 계속해서 증가하였다.

• Journal of Periodontal and Implant Science
• /
• 제28권1호
• /
• pp.87-102
• /
• 1998

The purpose of this stuffy was to assess and compare the osseous responses to implanted particles of porous synthetic HA (Interpore $200^{(R)}$, Interpore International, U.S.A.), resorbable natural bovine derived HA (Bio-$oss^{(R)}$, Gestlich Pharma, Switzerland) and calcium carbonate(Biocoral $450^{(R)}$, Inoteb, France) in bone defects. Four calvarial defects of 2.5mm diameter were created in earth of 16 Sprague-Dawley rats. The experimental materials were subsequently implanted hi three defects, leaving the fourth defect for control purpose. Four animals were earth sacrificed at 3 days, 1week, 2weeks and 4 weeks after surgery. The tissue response was evaluated under light microscope. Overall, histologic responses showed that all the particles were well tolerated and caused no aberrent tissue responses. There were difference in the amount of newly formed bone at the experimental sites and control site. There was more new bone formation associated with calcium carbonate site. In addition, the calcium carbonate site displayed multinucleated giant cells surrounding calcium carbonate particles after the 1st week, and osteoid tissue within the particle after the 2nd week. After 4 weeks, calcium carbonate particles were resorbed and replaced with new bone. The healing of the natural bovine derived HA site was similar to that of porous synthetic HA, except that new bone growth between the two particles have progressed more in the former site after the 2nd week. In the natural bovine derived HA site, the particle was surrounded by newly formed bone after the 4th week. After 4 weeks, the control site showed more mature bone than other sites. In conclusion, the grafted site were better in new bone formation than non-grafted sites. In particular the calcium Carbonate site showed the ability of osteoinduction and natural bovine denver HA showed osteoconduction in rat calvarial defects. This suggest that calcium carbonate and natural bovine derived HA could enhance the regenerative potential in periodontal defects.

• Journal of Periodontal and Implant Science
• /
• 제39권2호
• /
• pp.167-176
• /
• 2009

Purpose: The purpose of this study is to histologically and histomorphometrically evaluate the effect of PLGA on bone regeneration compared with bone graft material. Methods: The experimental study was conducted in 10 rabbits with 2 different healing periods of 2 and 4 weeks. Following surgical exposure of the calvarium, 4 circular bone defects with a diameter of 4.6mm were formed. Rabbits were divided into control group, test groups I, and II. 10 defects assigned to the test group Ⅰ were grafted with Nu-oss and other 10 defects assigned to the test group II were grafted with PLGA. The rest of the defects were in the negative control group. At 2nd and 4th week after surgery, 10 rabbits were sacrificed through intracardiac perfusion and then specimens were obtained. Histological analysis was performed following staining with trichorme and transversal sectioning of the calvarial bone. Results: A group which used PLGA showed tissue reactions characterized by severe inflammation, rather than distinctive new bone formation. Conclusions: The present experimental investigations have failed to prove any beneficial effects of PLGA. PLGA used in this study exhibited foreign body reactions and a less favorable pattern of new bone formation in comparison to control group. Conclusion: PLGA did not function as scaffold. Further investigations of many types of micro PLGA that could improve its potential in GBR procedures are needed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권1호
• /
• pp.28-39
• /
• 2007

The purpose of this study is to evaluate the regenerative capacity of reconstruction in the atrophied posterior maxilla by comparing bone graft procedures and alveolar distraction osteogenesis (ADO) techniques. We performed the autogenous iliac bone graft (AGB group, 5 specimens in 3 patients), and the combination (Mixed group, 3 specimens in 3 patients) of the autogenous and deproteinized bovine bone ($Bio-Oss^{(R)}$, Geistlich Co., Switzerland) as the ratio of 2:1 in the sinus floor elevation procedures. ADO procedures using $TRACK^{(R)}$ (KLS Martin Co., Germany) were also performed to augment vertical alveolar height in atrophied posterior maxilla (ADO group, 5 specimens in 4 patients). Newly generated bone tissues were obtained with the 2.0mm diameter trephine bur (3i Co., USA) during implant fixture installation after 5-7 months. Routine histolomorphological observation, immunodot blot assay for quantitative evaluation, and immunohistochemical staining with antibodies to MMP-1, -9, -10, TIMP-1, -2, and BMP-2, -4 were all carried out. Lamellar bone formation was well shown in all specimens and new bone formations of ADO group increased than those of other procedures. In immunohistochemical staining, the strong expression of BMP-2 was shown in all specimens, and immunodot blot assay showed that bone formation is accompanied by the good induction of factors associated with angiogenesis and appeared more increased amount of osteogenic and angiogenic factors in ADO group. ADO is the most effective technique for new bone formation compared to sinus floor elevation with autogenous or mixed bone graft in the atrophied posterior maxilla. In the quantitative immunodot blot assay, the regenerated bone after ADO showed more increased products of VEGF, BMP-2, PCNA and MMP-1 than those after the other procedures, and these findings were able to be confirmed by immunohistochemical stainings.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.297-305
• /
• 2001

Statement of problem. There have been previous studies about instability according to screw material by means of calculating preload in tightening screw or recording of the torque necessary to loosen screw after tightening screw. Purpose. The purpose of this study was to evaluate screw joint stability through the analysis of fitness at the mating thread surfaces between implant and screw after tightening screws made of different materials. Material and methods. In this study, screws were respectively used to secure a cemented abutment to a hexlock implant fixture; teflon coated titanium alloy screw and titanium alloy screw(Steri-Oss), gold-plated gold-palladium alloy screw and titanium alloy screw(Implant Innovation), gold screw and titanium screw(AVANA Dental Implant System). Each abutment screw was secured to the implant with recommended torque value using a digital torque controller. Each screw was again tightened after 10minutes. All samples were cross sectioned with sandpaper and polished. Then samples were evaluated with an scanning electron microscope analysis. Results. In titanium alloy screw, irregular contact and relatively large gap was present at mating thread surface. Also in teflon-coated titanium screw, incomplete seating and only partially contact was present at the mating thread surface. In gold-plated gold-palladium alloy screw, relatively close and tight contact without the presence of large gap was present by existing of gold coating at the mating thread surfaces. In gold alloy screw, relatively small gap between the mating components was seen. Conclusions. This result suggested that gold plated gold-palladium alloy screw and gold alloy screw achieved a greater degree of contact at the mating thread surfaces compared to titanium alloy screw and teflon-coated titanium alloy screw.