• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.707-710
• /
• 2010

Mt. Jiri, where is located in southwestern area of Korea, can be a treasury of herbal medicine plants grown wild. More than 1200 species currently classified as herbs are grown or cultivated. Recently, the studies on the safflower which attracts the interests in the inhibition of skin aging in the modern people have been actively investigated, and this study aims to confirm that polyphenol compound, the main ingredient of safflower, can be a natural material to cause the delayed effect on the skin aging, inhibiting the generation of wrinkle in the 30 to 40s middle aged females. Primarily, this study is to confirm the anti-oxidizing effect by DPPH assay in vitro, and to evaluate the efficacy of inhibition or improvement on the wrinkle generation in the face skin by clinical trials, additionally. In addition, we are confident to contribute on the improvement of functional cosmetic industry, developing the sample product of anti-aging mask pack which has the main ingredient with the extract of safflower.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.159-163
• /
• 2010

Co-(0.5 mol%) and Ce-(0~0.3 mol%) doped cubic zirconia ($ZrO_2:Y_2O_3$=64:36 mol%) single crystals grown by a skull melting method were heat-treated in $N_2$ at $1200^{\circ}C$ for 3 hrs. The brown-colored as-grown single crystals were changed into either green or blue color after the heat treatment. Before and after the heat treatment, the YSZ (yttriastabilized zirconia) single crystals were cut for wafer form (${\phi}7mm{\times}t2mm$) and round brilliant cut ($\phi$ 12 mm). The optical and structural properties were examined by UV-VIS spectrophotometer and X-ray diffraction. Absorption by $Ce^{3+}(^2F_{5/2},\;_{7/2}(4f){\rightarrow}^2T_g(5d^1)),\;Co^{2+}(^4A_2(^4F){\rightarrow}^4T_1(^4F)$ or $^4T_1(^4P))$ and $Co^{3+}$, change of ionization energy and lattice parameter were confirmed.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.146-153
• /
• 2021

Recently, research on perovskite semiconductor materials has been performed, and the evaluation of properties using surface treatment for this material is the basis for subsequent studies. We studied the results of surface treatment of perovskite thin films exposed to air for about 6 months by generating oxygen plasma with an atmospheric pressure plasma equipment. The reason for exposure for 6 months is that the perovskite thin film is made of organic and inorganic substances, so when exposed to air, the surface changes through reaction with oxygen or water vapor. Therefore, this change is to investigate whether it is possible to restore the original film. The surface shape and the ratio of elements were analyzed by varying the process time from 1 s to 1200 s in an oxygen plasma atmosphere. It was found that the crystal grains change over a process time of 5 s or more. In order to maintain the properties of the deposited film, it is the optimal process condition between 2 s and 5 s.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1193-1200
• /
• 2000

A network topology has been an important factor for an efficient network management, but data collection for the network configuration has been done manually or semi automatically by a network administrator or an expert. Requirements to generate an intro-domain network topology ar usually either all IP addresses with subne $t^ernet mask or the network identification of all IP addresses. The amounts of traffic are generally high in the semi-automatic system due to using large number of low-level protocols and commands to get rather simple data. In this paper, we propose an algorithm which can be executed with only publicly available input. It can find all IP addresses as well as the network boundary of an intra-domain by using an intelligent method developed in this algorithm. The collected data will be used to draw a network map automatically by using a proposed network topology generation algorithm.hm.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.564-576
• /
• 2017

${\cdot}$ GaN E-HEMT provides superior performance vs. Si MOSFET or IGBT, and also superior performance vs. SiC, below ~1200V ${\cdot}$ GaN E-HEMT is replacing Si MOSFET and IGBT in major application segments, and Industry Adoption will accelerate ${\cdot}$ Technology advances in GaN E-HEMT have made high-current true Normally-Off devices available in current ranges from 7A to 250A ${\cdot}$ While GaN has improved Properties vs. SiC or Si, different types of GaN devices offer different levels of performance or robustness ${\cdot}$ JEDEC Industrial-Grade Qualification of GaN E-HEMTs has been achieved, and Automotive Qualification is in progress.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.241-245
• /
• 2016

The purpose of this study was to investigate the bloating mechanism of artificial lightweight aggregates with different sizes (ESA, effective surface area). Aggregates were produced using hard clay, stone sludge, and a bloating agent in order to observe the effect of the gradation of the artificial lightweight aggregates. Kerosene and amorphous carbon were used as bloating agent. The particle size of the produced aggregate ranged from 3 mm to 9 mm. With regard to the amount of bloating agent to be used, 2 ~ 6 parts by weight were used. The specific gravity, absorption rate, and the type of aggregates produced by rapid sintering at $1075{\sim}1200^{\circ}C$ were determined. Microstructures were observed. When ESA had a value of 1 or below, kerosene, which has a high burning rate, was found to be advantageous for use as a bloating agent. When ESA had a value of 1 or above, carbon, which has a relatively low burning rate was found to be an advantageous bloating agent. It is thought that kerosene is more advantageous, as ESA decreases, for the production of aggregates having low water absorption rate.

• Laser Solutions
• /
• v.11 no.3
• /
• pp.1-4
• /
• 2008

A selective laser micro bonding process using liquid glass (methylsilsesquioxane) was developed and the results are analysed. The liquid glass can be solidified with Nd:YAG laser irradiation and it can be applied for joining two glass substrates. A bonding thickness of a few micrometers can be achieved. The appropriate laser power density (or this process is around 40-60 $kW/cm^2$ and its bonding force is 1000-1200 $gf/mm^2$. This process can be applied for bonding micro devices such as micro bio-sensors or display products. Its advantages and limitations are presented and discussed.

• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.79-84
• /
• 1994

The mechanism of activated sintering of tungsten powder was discussed in terms of diffusion and segregation of activator atoms at W grain boundaries. Shrinkage behaviours of W-0.2wt.% Ni, W-0.2wt.% Cu or pure W powder compacts during sintering at low temperatures of 900~ $1200^{\circ}C$ were investigated. It was found that the Cu additive inhibits sintering process causing lower densification than pure W compact while remarkable shrinkage occurred in the Ni added W powder. Such contrary effect was explained by comparing self diffusion processes along Ni or Cu segregated W boundaries in which Ni segregants enhance but Cu atoms retard the migration of W atoms at W boundaries.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1200-1202
• /
• 2003

Satellite and aerial images are very useful means to monitor ecological and environmental situation. Nowadays more and more officials at Ministry of Environment in Korea need to access and use these image data through networks like internet or intranet. However it is very hard to manage and service these image data through internet or intranet, because of its size problem. In this paper very large image data service system for Ministry of Environment is constructed on web environment using image compression and web based image processing technology. Through this system, not only can officials in Ministry of Environment access and use all the image data but also can achieve several image processing effects on web environment. Moreover officials can retrieve attribute information from vector GIS data that are also integrated with the system.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.603-603
• /
• 2003

I. Objectives The purpose of this study is to evaluate the effect of immediate or delayed composite placement on dentinal micro-tensile bond strength. Caries-free human third molars were used in this study. At first, the occlusal enamel was removed so that the middle dentin was exposed. And then the exposed dentin was polished with 1200-grit silicon carbide paper for the formation of smear layer. The polished dentin was etched with 32% phosphoric acid, dried with gentle air and applicated by dentin adhesives. The specimens were divided into 12 groups.(omitted)