• Journal of The Korean Society of Clinical Toxicology
• /
• v.15 no.2
• /
• pp.122-130
• /
• 2017

Purpose: To evaluate the effects of low-dose intravenous N-acetylcysteine on the prevention of contrast-induced nephropathy (CIN) in patients undergoing computed tomography (CT). Methods: All patients presenting to our emergency department and undergoing CT with intravenous contrast media between August 2014 and April 2016 were retrospectively enrolled. We included hospitalized patients with renal dysfunction [estimated glomerular filtration rate (GFR) between 30 and $89mL/min/1.73m^2$]. A 600-mg injection of N-acetylcysteine was given to patients once before and once immediately after CT, depending on the preference of physician. The primary outcome was CIN defined as an increase in creatinine level of ${\geq}25%$ or ${\geq}0.5mg/dL$ from the baseline within 48 to 72 hours after CT. A trained person blindly reviewed all medical records. Results: Of the 1903 admitted patients, CIN occurred in 9.8% of patients who received 1200 mg intravenous N-acetylcysteine (24/244) and 6.8% of patients who did not (113/1659, p=0.090). In a multivariable regression analysis, N-acetylcystine was not relevant to the prevention of CIN (odds ratio=1.42 [95% CI, 0.90-2.26]). Even in the stratified analysis using the propensity score matching, N-acetylcysteine was irrelevant (GFR 30-59: odds ratio=1.06 [95% CI, 0.43-2.60]; GFR 60-89: odds ratio=1.76 [95% CI, 0.75-4.14]). After adjustment, crystalloids were significantly associated with the reduction in CIN compared with dextrose water (odds ratio=0.60 [95% CI, 0.37-0.97]). Conclusion: No effect was found when low-dose intravenous N-acetylcysteine was used to prevent CIN. However, there seems to be an association between crystalloids and reduction in CIN.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.6
• /
• pp.465-475
• /
• 2017

Purpose: This study investigated the dietary patterns associated with Korean food and the level of proper eating habits according to recognition of the Kimchi cooking method, and aimed to suggest the necessity of dietary education of traditional foods such as Kimchi. Methods: Based on the results of the national dietary survey conducted in 2014 by Ministry of Agriculture, Food and Rural Affairs of Korea, a total of 1200 subjects were classified into two groups, one that knew how to make Kimchi (53.8%) and another that did not (46.2%). Results: The group that knew how to make Kimchi (FG) showed significantly higher scores in knowledge of how to cook most types of Korean foods and traditional fermented foods than the other group (NG). Moreover, FG showed significantly higher scores in regularity in meals and a higher frequency of Korean foods such as rice, Kimchi, and grilled or stewed food, while it showed significantly lower scores in dietary risk factors than NG. In addition, FG showed significantly higher scores in dietary education interest and number of meals with family during the week than NG. Finally, FG had significantly higher scores in the degrees of practice of all eight items related to proper eating habits. Conclusion: Since recognition of Kimchi cooking has a great influence on maintenance of dietary life, dietary education to improve the cooking ability of traditional foods should be further strengthened.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.627-632
• /
• 1995

W-Cu composites utilize the high electrical conductivity of copper and arc erosion resistance of tungsten to provide properties better suited to electrical contact applications than either tungsten or copper alone. W-Cu composite materials were milled in an attritor with an impeller speed of 300rpm for various milling times. The milled powders were compacted at 300MPa into cylinders, 16m in diameter, and approximately 4m high. Sintering was performed in dry H$_2$at temperature ranging from 1200$^{\circ}C$ to 1400$^{\circ}C$. Samples were sectioned and were polished for scanning electron microscopy (SEM) of microstructures. Homogeneous W-Cu composites were formed after 10 hours mechanical alloying and could be attained 99% density at 1330$^{\circ}C$. As mechanical alloying time increased, Fe-concentration was increased linearly. Intermetallic compound formation interupted the growth of W particles Increased hardness.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1096-1101
• /
• 2003

Si -substituted hydroxyapatite has been prepared to obtain biomaterials having an improved biocompatibility. From FT-IR, XRD, and ICP analyses, it was confirmed that the single-phase of hydroxyapatite substituted by Si has formed. Si- substituted hydroxyapatite of up to 2 wt% for Si keeps its original structures intact for the sintering temperatures of up to 1200$^{\circ}C$. However, it is observed that the ion substitutions by the amount higher than the above ratios for the hydroxyapatite leads to destabilize original structures of the hydroxyapatite and to produce tricalcium phosphate and calcium phosphate silicate phases when the samples were sintered at 1l00$^{\circ}C$ or higher.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.431-435
• /
• 2008

Thanks to the development of internet, on-line market expands exponentially and corresponding solid business models are drawn attentions. Most of on-line trading items are limited with selling game related items however, Linden Lab made its turning point by introducing cyber reality game to shape the cyber life with creating his own Avatar in 2003. After 2003, Second life has grown sharply that over 12 million users around the world. While former games are progressed within fixed scenario, the concept of avatars who live his or her own lives at the cyber space that successfully differentiate from former online game. Further, cyber money, Linden Dollar can be used to buy real estate, cloth, shoes just like at real economy system. Not only for using corporate marketing, various areas of activities; promotion of public sector, politics, education are also functioned at the cyber life. In Korea, Korean version of Second life was introduced at the end of 2007 that draws attentions from the users. In this study, I examine various business models of cyber through Second life and suggest feasible culture-contents applying models.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.3
• /
• pp.11-19
• /
• 1988

The purpose of this study is to investigate ways to control the wind dispersal of contton-wrapped seeds of such poplars and willows as Poplus alba, P. tomentiglandulosa, P. euramericana, P. deltoides, and Salix pseudo-lasiogyne. These trees are hated by many people because of their seeds blowing all over the place during May. These cottony seeds can be nuisance to various types of outdoor activities, pose safely threat to drivers, become fire hazards during prolonged spring dry spells, and cause many types of health hazards of allergy such as sneezing. rhinitis, asthma, and skin rashes. Four control methods can be used to resolve the problem. First, pruning can be a solution, but it is unsatisfactory in terms of costs and outcome. Second, planting of male trees only can be a solution, but it is hard to identify sexes of saplings. Third, female trees can he replaced with other species. But it requires high costs and takes at least ten years to functionally replace the removed ones. As an alternative to such unsatisfactory control methods, the possibility of applying plant growth regulators has been investigated since 1983. During the pre-test, various concentrations and mixtures of them were either sprayed or injected, but failed to achieve any promising results. But the injection of a mixture made up of 0.75g of 2-chloroethane phosphonic acid with 0.2 mg of GA in 300cc water in the end of March produced premature falling of almost all aments and capsules of treated poplars and willows. It was found that the effect of the injection lasts two years. The results of the main experiment of 1987 can be summarized as follows ; First, the injection of the mixture of 2-chloroethane phosphonic acid and GA increases the premature abscisin of aments and capsules, thus reducing the wind dispersal of the cottony seeds of S. pseudolasiogyne, P. tomentiglandulosa, and P. euramericana 1644.09, 1200.61, and 1485.11 times, respectively, than that of the naural abscisin, It is estimated that the average number of wind-blown seeds reduced are approximatively 6,185,100, 4062,900, and 2,830,670 per tree, respectively. Second, the treatment causes no observable side effects on the growth of the samples tested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1192-1200
• /
• 2007

A general rainfall outflow in urban drainage has early time of concentration because urban drainage areas are most paved area. In general, rainfall outflow is flowed in drainage pump station and is discharged to rivers in urban areas. However it is excluded through drainage pumps about a heavy rainfall which exceed the design rainfall and the rainfall outflows increase the urban inundation risk. A current pump operation is control according to water level of collecting well or reservoir in drain pump station. But recently, the localized downpours are happened frequently in urban drainage and the current pump stations are frequently incapable of the heavy rainfall outflows. In this study, a real urban inundation was simulated and the drain capacity of drain pump station was evaluated by analysis about flood-factor in urban underground passage. Then the analysis about the inundation was done by the simulation about the real rainfall which cause the inundation. Also, in the simulation the inundation risk and the evaluation of flood-factor were analyzed according to change of the pump operation rule.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.2
• /
• pp.89-96
• /
• 2001

N- or O-doped STS304 stainless films were synthesized by an unbalanced magnetron sputtering process with various argon and reactive gas ($N_2$, $O_2$) mixtures. These films were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Auger electron spectroscopy (AES) and Knoop microhardness tester. The Results from X-ray diffraction (XRD) analysis showed that a STS304 stainless steel film synthesized without reactive gas using a bulk STS304 stainless steel target had a ferrite bcc structure ($\alpha$ phase), while the N-doped STS304 stainless film was consisted of a nitrogen supersaturated fcc structure, which hsa a strong ${\gamma}$(200) phase. In the O-doped films, oxide Phases ($Fe_2$$O_3$ and $Cr_2$$O_3$) were observed from the films synthesized under an excess $O_2$ flow rate of 9sccm. AES analysis showed that nitrogen content in N-doped films increased as the nitrogen flow rate increased. Approximately 43 at.%N in the N-doped film was measured using a nitrogen flow rate of 8sccm. In O-doped film, approximately 15 at.%O was detected using a $O_2$ flow rate of 12sccm. the Knoop microhardness value of N-doped film using a nitrogen flow rate of 8 sccm was measured to be approximately $H_{ k}$ 1200 and this high value could be attributed to the fine grain size and increased residual stress in the N-doped film.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.6
• /
• pp.360-365
• /
• 2004

Ti$_3$SiC$_2$ material was synthesized via the powder metallurgical route, and oxidation tested between 900 and $1200^{\circ}C$ in air for up to 100 hr. The oxidation of $Ti_3$$SiC_2$ material resulted in the formation of $TiO_2$and $SiO_2$, accompanying the evolution of CO or $CO_2$ gases from the initial stage of oxidation. The oxidation resistance of $Ti_3$$SiC_2$ mainly owes the protectiveness of highly stoichiometric $SiO_2$. During the initial stage of oxidation, the dominant reaction was the inward transport of oxygen into the matrix. As the oxidation progressed, an outer $TiO_2$ layer and an inner ( $TiO_2$ + $SiO_2$) mixed layer formed. Between these layers and inside the oxide scale, numerous fine voids formed. Numerous, fine oxide grains formed at $900^{\circ}C$ developed into the outer coarse $TiO_2$ grains and an inner fine ($TiO_2$ + $SiO_2$) mixed grains at the higher temperatures. The oxidation resistance of$ Ti_3$SiC$_2$ progressively deteriorated as the oxidation temperature increased, forming thick scales above $1000^{\circ}C$. The outer coarse $TiO_2$ grains formed above $1100^{\circ}C$ grew rapidly mainly along (211).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.164-165
• /
• 2005

The dry etch characteristics of GaAs over both AlGaAs and InGaP in planar inductively coupled $BCl_3$-based plasmas(ICP) with additions of $SF_6$ or $CF_4$ were studied. The additions of flourine gases provided enhanced etch selectivities of GaAs/AlGaAs and GaAs/InGaP. The etch stop reaction involving formation of involatile $AlF_3$ and $InF_3$ (boiling points of etch products: $AlF_3\sim1300^{\circ}C$, $InF_3$ > $1200^{\circ}C$ at atmosphere) were found to be effective under high density inductively coupled plasma condition. Decrease of etch rates of all materials was probably due to strong increase of flourine atoms in the discharge, which blocked the surface of the material against chlorine neutral adsorption. The process parameters were ICP source power (0 - 500 W), RF chuck power (0 - 30 W) and variable gas composition. The process results were characterized in terms of etch rate, selectivities of GaAs over AlGaAs and InGaP, surface morphology, surface roughness and residues after etching.