• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.837-838
• /
• 2009

In this work, pyromellitic dianhydride (PMDA) was used as a cathode interfacial layer in the organic light emitting diodes (OLEDs) and its thickness was optimized. Various electrical and optical characterizations of the OLEDs having various thicknesses of the PMDA cathode interfacial layer revealed that the best OLED performance could be achieved by using 0.5 nm-thick PMDA layer compared to the control device without any interfacial layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.475-476
• /
• 2005

Efficient electron injection is essential to achieve bright and efficient organic light-emitting diodes (OLEDs). In spite of high work function of Al, it is a common cathode because of its stability. In this paper, to overcome the poor electron injection in OLEDs with Al cathode, OLEDs with various composite cathodes were fabricated and investigated using a conventional OLEDs structure of indium tin oxide ITO/NPB(40 nm)/$Alq_3$(50 nm)/Al. composite cathodes were composed of alkaline materials such as Ca and Li, Al deposition or codeposited with AI. We showed best performance at the device with composite cathode (LiF/Al).

• Journal of Information Display
• /
• 제10권3호
• /
• pp.111-116
• /
• 2009

In this paper, a plasma-assisted patterning method for the organic layers of organic light-emitting diodes (OLEDs) and its effect on the OLED performances are reported. Oxygen plasma was used to etch the organic layers, using the top electrode consisting of lithium fluoride and aluminum as an etching mask. Although the current flow at low voltages increased for the etched OLEDs, there was no significant degradation of the OLED efficiency and lifetime in comparison with the conventional OLEDs. Therefore, this method can be used to reduce the ohmic voltage drop along the common top electrodes by connecting the top electrode with highly conductive bus lines after the common organic layers on the bus lines are etched by plasma. To further analyze the current increase at low voltages, the plasma patterning effect on the OLED performance was investigated by changing the device sizes, especially in one direction, and by changing the etching depth in the vertical direction of the device. It was found that the current flow increase at low voltages was not proportional to the device sizes, indicating that the current flow increase does not come from the leakage current along the etched sides. In the etching depth experiment, the current flow at low voltages did not increase when the etching process was stopped in the middle of the hole transport layer. This means that the current flow increase at low voltages is closely related to the modification of the hole injection layer, and thus, to the modification of the interface between the hole injection layer and the bottom electrode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1575-1577
• /
• 2002

In this study, multi layer type OLED(Organic Light Emitting Diode) has been fabricated using $Snq_2$, $Snq_4$, and $Alq_3$ for development of high efficiency, electrical and optical properties of multi layer type OLED investigated. The HTL(Hole Transfer Layer) and EML(Emitting Material Layer) were fabricated by using vacuum evaporation on ITO electrode, and its thickness controlled using thickness monitor. Al was used as a cathode. The electrical and optical properties such as J-V, brightness-V and EL spectrum of OLED device was measured using I.V.L.T system. The result, brightness of $Alq_3$, $Snq_2$ and $Snq_4$ were $3900cd/m^2$, $63cd/m^2$ and $23cd/m^2$ respectively.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1355-1360
• /
• 2013

We have developed a new multifunctional material, 4,4',4"-tris(4-naphthalen-2-yl-phenyl)amine (2-TNPA), which can be used as a blue-emitting and hole-transporting material in organic light-emitting diodes (OLEDs), as well as a donor material in organic solar cells (OSCs) and an active material in organic thin-film transistors (OTFTs). The OLED device doped with 3% 2-TNPA shows a maximum current efficiency of 3.0 $cdA^{-1}$ and an external quantum efficiency of 3.0%. 2-TNPA is a more efficient hole-transporting material than 4,4'-bis[N-(naphthyl-N-phenylamino)]biphenyl (NPD). Furthermore, 2-TNPA shows a power-conversion efficiency of 0.39% in OSC and a field-effect mobility of $3.2{\times}10^{-4}cm^2V^{-1}s^{-1}$ in OTFTs.

• 전자공학회논문지 IE
• /
• 제45권1호
• /
• pp.1-6
• /
• 2008

본 연구에서는 발광층에 2 파장 재료를 갖는 백색 유기발광소자를 진공증착법을 사용하여 청색 발광재료인 NPB와 황색 발광재료인 Rubrene을 사용하여 제작하였다. 제작된 소자는 ITO/NPB$(200{\AA})$NPB:Rubrene$(300{\AA})$/BCP$(100{\AA})/Alq_3(100{\AA})/Al(1000{\AA})$ 구조로 하였고 Rubrene의 도핑농도는 0.75 wt%이었다. 소자의 색좌표값은 인가전압 11 V에서 x = 0.3327, y = 0.3387 로 NTSC 색좌표 순수한 백색영역(x = 0.3333, y = 0.3333)에 근접한 순수한 백색에 가까운 값을 얻었고, 이 때 최대발광파장은 560 nm이었다. 소자의 동작 개시전압은 1 V이하이고 발광 개시전압은 4 V이다. 최대 외부양자효율은 인가전압 18.5 V, 전류밑도 $369mA/cm^2$ 일 때 0.457 %를 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.36-37
• /
• 2009

We have studied the effect of the hole transporting layers on the device efficiencies blue phosphorescent organic light emitting diodes (PHOLED) with of iridiumIIIbis4,6-di-fluorophenyl-pyridinato-N,C2picolinate (FIrpic) doped 3,5--N,N-dicarbazole-benzene (mCP) host. The highest efficiency of blue PHOLED is strongy dependent on the hole transporting materials, exhibiting the maximum current efficiency.

• 한국전기전자재료학회논문지
• /
• 제26권9호
• /
• pp.682-685
• /
• 2013

We have fabricated blue phosphorescent organic light-emitting devices (OLEDs) on a plastic substrate. The solution coated poly (9-vinylcarbazole) (PVK) host doped with Bis (3,5-difluoro-2-(2-pyridyl)phenyl_(2-carboxypyridyl)irdium(III) (FIrPic) guest molecules was used as an hole transporting emission layer. The device structure was ITO/PVK:FIrpic (50 nm, xwt%)/TAZ 50 nm)/LiF (0.5 nm)/Al (100 nm). The concentration of FIrpic molecule was varied from 1 wt% to 10 wt%. The OLED on plastic substrate exhibited maximum current efficiency of 18 cd/A with 5 wt% FIrpic molecules were doped into the PVK layer.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.936-940
• /
• 2005

IMML(Inorganic metal multi-layer) was used as cathode in the OLED devices to reduce the reflectance or ITO and increase the contrast ratio. Device structure was $ITO/{\alpha}-NPD/Alq_3:DCJTB/Alq_3/IMML/Al$. $Alq_3$ and DCJTB (4 - (dicyanomethylene) - 2 - ( 1 - propyls) 6 - methy 4H - pyrans) as host material lot red emission and red emitting guest material. IMML made three different layer: thin aluminum layer, aluminum layer doped with silicon monoxide, thick aluminum layer. The red OLED device with IMML showed the average reflectance of $4.97\%$, and then normal OLED with or without polarizer showed the average reflectance of $4.55\%$, $46\%$ at visible range from 380 nm to 780 nm. The brightness of OLED with IMML at 13 V was 5557 $cd/m^2$, and that of normal OLED with polarizer was 4872 $cd/m^2$. IMML could be the substitution for polarizer with same reflection, low cost, easy process in flat panel display market.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1062-1065
• /
• 2004

The importance of display is becoming increasingly important due to the development of information and industry where it leads to diverse and abundant information in today's society. The demand and application range for FPD(Flat Panel Display), specifically represented by LCD(Liquid Crystal Display) and PDP(Plasma Display Panel), have been rapidly growing for its outstanding performance and convenience amongst many other forms of display. The current focus has been on OLED(Organic Light Emitting Diode) in the mobile form, which has just entered into mass production amid the different types of FPD. Many studies are being conducted in regards to device, vacuum evaporation, encapsulation, and drive circuits with the development of device as a matter of the utmost concern. This study develops a new type of light-emitting materials by synthesizing medical polymer organic chitosan and phosphor material CuS. Chitosan itself satisfies the Pool-Frenkel Effect, an I-V specific curve, with a thin film under $20{mu}m$, and demonstrates production possibility for a living body sensors solely with the thin film. Furthermore, it enables production possibility for EML of organic EL device(Emitting Layer) with liquid Green light emitting and Blue light emitting as a result of synthesis with phosphor material.