• 통합자연과학논문집
• /
• 제9권1호
• /
• pp.10-15
• /
• 2016

In this paper the approximation methods of offset curve of conic with explicit error bound are considered. The quadratic approximation of conic(QAC) method, the method based on quadratic circle approximation(BQC) and the Pythagorean hodograph cubic(PHC) approximation have the explicit error bound for approximation of offset curve of conic. We present the explicit upper bound of the Hausdorff distance between the offset curve of conic and its PHC approximation. Also we show that the PHC approximation of any symmetric conic is closer to the line passing through both endpoints of the conic than the QAC.

• 공학기술논문지
• /
• 제7권3호
• /
• pp.131-135
• /
• 2014

In this paper was proposed a flux offset-type fault current limiter as means of reducing fault currents. To secure the operation reliability of a flux offset-type fault current limiter, constructed a simulation system to analyze its operation characteristics by generating a double line-to-line fault. According to the test results, the system performed stably without any impedance. However, when an accident occurred, the flux-offset of magnetic was not occurred. Because of this, any impedance occurred at circuit. It was confirmed that the impedance was low and fast to limit the fault current. At this time, the fault current limited rate was about 95%.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.578-583
• /
• 2013

The lighting devices using organic light emitting diodes (OLEDs) are actively researched because of the various advantages such as high power efficiency and 2-dimensitonal lighting emitting. To commercialize those OLED lighting devices, the manufacturing cost must be downed to comparable price with conventional light sources. Here, we demonstrate a reverse gravure-offset or gravure off-set printed metal electrode for the auxiliary electrode for OLED lighting devices. For the fabricated OLED's auxiliary electrode, we used Ag nano-paste and printed metal grid structure with a line width and spacing of several ten and hundred micrometer by using gravure-offset printing. In the end the printing metal grid pattern are successfully achieved by optimization of various experimental conditions such as printing pressure, printing speed and printing delay time.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.82-91
• /
• 2014

This paper proposes a compensation algorithm for the analog rotor position errors caused by nonideal sinusoidal encoder output signals including offset and gain errors. In order to achieve a much higher resolution, position sensors such as resolvers or incremental encoders can be replaced by sinusoidal encoders. In practice, however, the periodic ripples related to the analog rotor position are generated by the offset and gain errors between the sine and cosine output signals of sinusoidal encoders. In this paper, the effects of offset and gain errors are easily analyzed by applying the concept of a rotating coordinate system based on the dq transformation method. The synchronous d-axis signal component is used directly to detect the amplitude of the offset and gain errors for the proposed compensator. As a result, the offset and gain errors can be well corrected by three integrators located on the synchronous d-axis component. In addition, the proposed algorithm does not require any additional hardware and can be easily implemented by a simple integral operation. The effectiveness of the proposed algorithm is verified through several experimental results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.601-617
• /
• 2014

In digital radio broadcasting systems, long delays are incurred in service start time when tuning to a particular frequency because several synchronization steps, such as symbol timing synchronization, frame synchronization, and carrier frequency offset and sampling frequency offset compensation are necessary. Therefore, the operation of the synchronization blocks causes delays ranging from several hundred milliseconds to a few seconds until the start of the radio service after frequency tuning. Furthermore, if spectrum inversed signals are transmitted in digital radio broadcasting systems, the receivers are unable to decode them, even though most receivers can demodulate the spectral inversed signals in analog radio broadcasting systems. Accordingly, fast synchronization techniques and a method for spectral inversion detection are required in digital radio broadcasting systems that are to replace the analog radio systems. This paper presents a joint detection method of frame, integer carrier frequency offset, and spectrum inversion for DRM Plus digital broadcasting systems. The proposed scheme can detect the frame and determine whether the signal is normal or spectral inversed without any carrier frequency offset and sampling frequency offset compensation, enabling fast frame synchronization. The proposed method shows outstanding performance in environments where symbol timing offsets and sampling frequency offsets exist.

• 한국전자파학회논문지
• /
• 제19권4호
• /
• pp.461-469
• /
• 2008

본 논문은 MIMO OFDM 시스템에 적용 가능한 하이브리드 심볼 옵셋 추정 알고리즘을 제안한다. MIMO OFDM 시스템은 다중 송수신 안테나 시스템이므로 종래의 단일 송수신 안테나 시스템에 적용되는 알고리즘과는 다르게 다중 수신 안테나 시스템에서 사용하는 결합 기법을 고려하여 사용할 수 있다. 따라서 본 논문에서는 MIMO OFDM 시스템과 같은 다중 수신 안테나 시스템에서 적용 가능한 심볼 옵셋 추정 알고리즘을 제안하고, MIMO 시스템 환경에서 모의 실험하였으며, ISI가 심한 채널의 경우에는 제안하는 동일 이득 결합 상관 관계 알고리즘이 종래의 이른 심볼 옵셋 추정 알고리즘보다 이상적인 샘플 위치를 찾는 성능이 1.8배 우수함을 제시하였다.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.905-912
• /
• 2008

Notion sickness is well known to be caused by long time exposure to the very low frequency motion in the multiple axes of human body Since the vestibular system for the perception of low frequency motion is located in the head, accurate measurement of 6 degree of freedom head motion is of great importance. In this study, the measurement system consisting of a safety helmet and 9 translational accelerometers was constructed for the estimation of 3 translational and 3 rotational motions of human head. Since estimation errors of 3 rotational components can be significantly magnified even by small offset of the sensitivity axis from the geometric center of an accelerometer, accurate measurement of sensitivity axis must be preceded. The method for accurate estimation of the offset was proposed, and the effect of offset on the estimation of angular acceleration was investigated.

• 대한산업공학회지
• /
• 제19권3호
• /
• pp.123-137
• /
• 1993

In this paper, an integrated approach is proposed to generate gouging-free Cartesian tool paths for machining sculptured surfaces from 3D measurement data. The integrated CAD/CAM system consists of two modules : offset surface module an Carteian tool path module. The offset surface module generates an offset surface of an object from its 3D measurement data, using an offsetting method and a surface fitting method. The offsetting is based on the idea that the envelope of an inversed tool generates an offset surface without self-intersection as the center of the inversed tool moves along on the surface of an object. The surface-fitting is the process of constructing a compact representation to model the surface of an object based on a fairly large number of data points. The resulting offset surtace is a composite Bezier surface without self-intersection. When an appropriate tool-approach direction is selected, the tool path module generates the Cartesian tool paths while the deviation of the tool paths from the surface stays within the user-specified tolerance. The tool path module is a two-step process. The first step adaptively subdivides the offset surface into subpatches until the thickness of each subpatch is small enough to satisfy the user-defined tolerance. The second step generates the Cartesian tool paths by calculating the intersection of the slicing planes and the adaptively subdivided subpatches. This tool path generation approach generates the gouging-free Cartesian CL tool paths, and optimizes the cutter movements by minimizing the number of interpolated points.

• 방송공학회논문지
• /
• 제14권3호
• /
• pp.357-365
• /
• 2009

OFDM 시스템에서 송수신단의 샘플링 주파수가 정확하지 않을 경우 샘플링 주파수 옵셋으로 인한 ICI(Inter-Carrier Interference) 현상이 발생하여 수신 성능의 열화를 초래한다. 일반적으로 샘플링 주파수 옵셋은 주파수 영역에서 2개의 인접한 OFDM 심볼의 동일한 파일럿 위치에서의 부반송파간 상관을 통해 추정하게 되는데, 본 논문에서는 인접한 심볼뿐만 아니라 더 많은 연속된 심볼들 간의 다양한 조합을 통한 상관을 이용하여 샘플링 주파수 옵셋을 추정하는 기법을 제안한다. 제안된 방법을 DVB-T(2K 모드) 시스템에 적용하여 모의실험을 진행하고, 이를 통해 AWGN 채널 환경에서 심볼들 사이의 잡음의 영향을 줄임으로써 샘플링 주파수 옵셋 추정 성능을 향상시킬 수 있음을 확인한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.154-164
• /
• 2017

This work conducts a validation study for the XH-59A helicopter using a rigid coaxial rotor system in order to establish the techniques of the conceptual design and performance analysis for the lift-offset compound rotorcraft. As a tool for conceptual design and performance analysis, NDARC (NASA Design and Analysis of Rotorcraft) is used for the present study. An assumed mission profile is considered for the conceptual design of the XH-59A. As a validation result of the design, the dimensions and weight of the XH-59A are appropriately designed when compared to the target values since the relative error is less than 0.5%. Then, performance analyses are conducted for the designed XH-59A model with and without auxiliary propulsion in hover and forward flight conditions. The present analyses show good validity since the prediction results compare well with both the flight test and previous analyses. Therefore, the techniques for the conceptual design and performance analysis of the lift-offset compound helicopter are overall considered to be appropriately established. In addition, this study investigates the influence of the lift-offset on the rotor effective lift-to-drag ratio of the XH-59A helicopter with auxiliary propulsion. As a result, the improvement of the rotor effective lift-to-drag ratio can be obtained by appropriately increasing the lift-offset in high-speed flight.