• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.49-51
• /
• 2006

OLEOs was fabricated by PLD method. Wet etching process and plasma treatment of ITO on the glass were performed to extend the lifetime of the OLED and increase its brightness. The NPB, $Alq_3$, Li-Benzoate and AI layers on ITO pattern on the glass were deposited by PLO method, sequentially. When the etched ITO was treated by $O_2$ plasma with RF power of 50W, the best result was obtained. The lifetime of the OLED treated by $O_2$ plasma was extended from 3,770sec to 12,586sec compared to that without the plasma treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.283.1-283.1
• /
• 2013

ZnO nanowire를 기반으로 하는 nanogenerator는 미세한 움직임을 전기 에너지로 변환 시키는 압전 에너지 하베스팅 기술로 기존 에너지 하베스터와 비교하여 사용환경의 제약이 적고, 소형화가 가능한 장점으로 주목을 받고 있다. 특히 혈류, 심장박동, 호흡 등 인체 활동 에너지를 이용한 발전 소자 등의 활용이 가능하여 활발한 연구가 진행되고 있다. 하지만, 최근 발표된 film like Vertical 구조의 nanogenerator는 nanowire의 구조 취약성으로 인해 내구성이 좋지 못한 단점이 있다. 또한 ZnO nanowire의 내부 O2 결함 및 표면 OH-기의 흡착에 의한 특성 저하가 나타난다. 본 연구에서는 nanogenerator의 내구성을 향상시키기 위해 capping layer로 실리콘 계 유무기 하이브리드를 적용하여 코팅 물질 및 코팅 방법을 최적화 하였으며 상부 전극을 CNT-Ag nanowire 소재로 대체하여 유연기판에 대응코자 하였다. 또한 APP(Atmosphere Pressure Plasma)와 ICP(Inductively Coupled Plasma)장비를 사용하여 ZnO nanowire를 표면처리하였고, 각각의 플라즈마 표면처리의 영향에 대해 조사하였다. XPS를 통하여 OH-기의 제거 유무를 확인하였으며, 소자의 발전 특성의 향상을 확인 하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.23-26
• /
• 2007

The effects of plasma treatment on the ITO/glass substrate before deposition of organic materials were investigated in the fabrication of green light emitting organic devices with $Alq_3-C545T$ fluorescent system. In our experiments, the optimum plasma treatment was obtained at the power and time of 150W and 2 minutes under the $Ar(50%)/O_2$ ambient of 1 mTorr. The green OLED with plasma treatment at 150W for 2 minutes showed the luminance and efficiency of $4700\;cd/m^2$ and 8 lm/W at 10V, respectively. On the contrary, the same structured device without plasma treatment showed much lower performance with the luminance of $2600\;cd/m^2$ and the efficiency of 3.6 lm/W at 10 V.

• Textile Coloration and Finishing
• /
• v.4 no.1
• /
• pp.1-9
• /
• 1992

In order to study on the surface modification of the poly(ethylene Terephthalate)(PET) fabrics, low temperature plasma$(O_2)$ has been irradiated on the PET fabrics in various conditions. Experiments were carried out at pressure ranging from 0.5 tort to 3 tort. The properties of PET fabrics treated with low temperature plasma($(O_2)$, such as bathochromic, wettability, antistatic property were measured. Etching ratio was increased as the pressure and the output of discharge increased. When its were put on the cathode, the most efficient effect of etching according to the position of sample between anode and cathode was obtained. The bathochromic effect has more or less improved as pressure was getting higth in case of dyed fabrics treated with only low temperature plasma$(O_2)$ . And when it was treated with the low refractive index resin, the bathochromic of dyed fabrics treated with low temperature plasma$(O_2)$ was better than that of the dyed fabrics untreated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.836-840
• /
• 2013

In this study, the surface modification of copper foil using an inductively coupled $O_2$ / Ar plasma as $O_2$ gas fraction (0~100%) was investigated in order to improve the surface characteristics. After plasma treatment, the measurement of the surface roughness, surface contact angle and surface energy were performed for the surface analysis of copper foil. As a result, the surface roughness and the surface energy were increased. And plasma diagnostics was performed by a double Langmuir probe (DLP) and optical emission spectroscopy (OES). Using these results, the plasma surface modification mechanism was investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.208-208
• /
• 2003

• Membrane Journal
• /
• v.13 no.2
• /
• pp.73-80
• /
• 2003

Abstract: The surfaces of poly (methylpentene)(PMP) were modified by Af and $NH_3$ plasma treatment, and their effects on permeation characteristics were investigated. The mole ratio of O/C in the surface was increased with Ar plasma treatment and consequently the surface became hydrophilic because of the possible formation of -OH, -COOH and C=O. The surface treated by $NH_3$ plasma also became hydrophilic due to the formation of amine and/or amide groups. The $CO_2$ permeability and its actual selectivity over N_2$ were 182 baller and 6.17 for the optimum condition of Ar-30W-6min, while 144 Baller and 6.13 for that of $NH_3$-30 W-8 min.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.234-240
• /
• 2001

The diffusion barrier properties of TiN by using Cu(Mg) alloy film have been investigated. Cu(Mg) alloy film was deposited on air-exposed TiN film. Upon annealing, interfacial MgO of 100 $\AA$ has been formed due to the reaction of Mg with oxygen existed on the surface of TiN. Combined MgO/TiN structure prevented the interdiffusion of Cu and Si up to $800^{\circ}C$. To improve the adhesion of Cu(Mg) alloy film to the TiN, TiN layer was treated by $O_2$ plasma, followed by vacuum annealing at $300^{\circ}C$. It was found that increased oxygen on the surface of TiN film by plasma treatment enhanced segregation of Mg toward the interface, resulting in the formation of dense MgO layer. Improved adhesion characteristics have been formed through this treatment. However, increased power of $O_2$ plasma led to the formation of TiO$_2$ and decreased the Mg content to be segregated to the interface, resulting in the decrease in adhesion property. In addition, the deposition of 50 ${\AA}$ Si on the TiN enhanced the adhesion of Cu(Mg) alloy to TiN without deteriorating the TiN diffusion barrier characteristics.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.344-350
• /
• 1999

The surface chemical structure of three kinds of polyethylene (PE): high density (HD) PE, low density (LD) PE and linear (L)-LDPE exposed to Ar and $O_2$ plasmas has been investigated using XPS. Oxygen was incorporated in a more increased amount for HDPE than for L-LDPE and LDPE. Ar plasma tended to incorporate more oxygen than $O_2$ plasma. The XPS valence band spectra for Ar plasma exhibited a clear peak assigned to $O_2$s character. By chemical derivatization method it was found that the amount of -COOH group at the surface was much greater than that of -OH group. The hydrophilic nature of plasma-treated PE increased in the order: LDPE

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.4
• /
• pp.313-317
• /
• 2010

Purpose: The purpose of this study was to investigate the surface characteristics of plasma electrolytic oxidation (PEO) surface treatment on AZ31 magnesium alloy eyeglass frames. Methods: The plasma electrolytic oxidation (PEO) surface was created by varying the DC voltage. The oxidation layer of coating was measured using phase analysis by X-ray diffraction. The microstructural morphology was observed using a scanning electron microscopy. Coating layer and the concentration of elements were investigated using the energy dispersive X-ray spectra. Results: The MgO XRD peak was increased as the voltage increased, and the density of the surface oxide film was also increased. The changes in the composition of the EDS also showed a good agreement. Conclusions: The compound oxide crystallization of PEO oxide film layer was done by increasing formation of MgO as the voltage increased. The treatment at 65V and 60 sec showed the best results at surface state, contact angles and salt spray test.