• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.287-292
• /
• 1997

This study was tried to form the silica waveguide using high density plasma. Plasma characteristics have been investigated as a function of etch parameters using a single Langmuir probe and optical emission spectroscopy(OES). As etch parameters, $CF_4/CHF_3$ ratio, bias power, and source power were chosen as main variables. The oxide etch characteristics of inductively coupled plasma(ICP) dry etcher such as the etch rate, etch profile, and surface roughness were investigated s a function of etch parameters. On the basis of these results, the core pattern of the wave guide composed of $SiO_2-P_2O_5$ was formed. It was confirmed that the etch rate of $SiO_2-P_2O_5$ core layer was 380 nm/min and the aluminum selectivity to oxide, that is, mask layer was approximately 30:1. The SEM images showed vertical etched profiles and minimal loss of pattern width.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.585-589
• /
• 2011

Purpose: Microcirculation of diabetic patients is commonly comporomised, regardless of the condition of the macrocirculation. Therefore, direct tissue oxygenation measurement is recommended in determining tissue viability and predicting wound healing potential. This study was designed to determine cut-off value of the tissue oxygenation in predicting wound healing in diabetic foot patients. Methods: This study included 41 feet of 41 diabetic foot patients who were treated in the Diabetic Wound Center of author's institution between January and June, 2009. Main inclusion criteria were type 1 or 2 diabetes and a foot ulcer (duration > 3 weeks) and ulcer area (from 1 $cm^2$ to 4 $cm^2$). Measurements of the area of diabetic foot ulcer were carried out before treatment. Transcutaneous oxygen pressure ($TcpO_2$) was measured at adjacent site of ulcer. The healing wound was defined as complete wound closure within 12 weeks. Results: Average diabetic foot ulcer areas with healing and nonhealing wounds were $2.67{\pm}0.76$ and $2.59{\pm}0.75\;cm^2$, respectively. There was no significant difference in the wound area between the groups. Average foot $TcpO_2$ in healing and nonhealing wounds were $68.56{\pm}23.07$ and $30.98{\pm}16.66$ mmHg, respectively ($p$ <0.01). The rate of healing wound increased as $TcpO_2$ increased. In particular, $TcpO_2$ lower than 40 mmHg and higher than 40 mmHg showed the most significant difference (wound healing rates of 25% and 71%, respectively). Conclusion: Based on the results of the study, the minimal $TcpO_2$ value thought to be required for adequate wound healing in diabetic wounds (cut-off value) is 40 mmHg.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.367-373
• /
• 1996

The growth characteristics of Rhodotorula sp. Y-55 were examined on minimal medium containing ethanol, acetic acid or acetadehyde as a sole carbon source by batch culture. The increased concentration of substrate reduced overall growth yield and prolonged lag time. The specific growth rate of the yeast was changed, depending upon the initial concentrations of ethanol and acetaldehyde during the exponential period, but was constant on acetic acid without regard to the initial substrate concentrations, giving a value of 0.l07h-1. The highest ${\mu}$ value was obtained on ethanol and acetadehyde substrates and the respective values were 0.270 at 20g/L and 0.041h-1 at 0.2g/L. The maximum overall growth yields were appeared to be 32.6% for ethanol of 10g/L, 25.6% for acetic acid of 20g/L, and 45% for acetaldehyde of 0.2g/L. The respective cellular contents of crude protein and nucleic acids were determined to be 41.5 and 4.9wt% on ethanol and 40.2 and 4.7wt% at the concentration revealing maximal growth yield.

• Preventive Nutrition and Food Science
• /
• v.6 no.1
• /
• pp.6-9
• /
• 2001

Minimal inhibitory concentrations (MIC) and antimicrobial effects of glycerol monolaurate (monolaurin) and organic acids, either alone or in combination, against Escherichia coli O157:H7 in tryptic soy broth were determined. MIC values of monolaurin(ML), acetic (AA), citric (CA), lactic (LA) and hydrochloric acid (HCl) were 300$\mu\textrm{g}$/mL (0.03%), 1250$\mu\textrm{g}$/mL(0.125%), 5000$\mu\textrm{g}$/mL(0.5%), 2500$\mu\textrm{g}$/mL(0.25%) and 2500$\mu\textrm{g}$/mL(0.25), respectively. When 150$\mu\textrm{g}$/mL of ML was combined with 50$\mu\textrm{g}$/mL AA, 250$\mu\textrm{g}$/mL HCl and 125$\mu\textrm{g}$/mL LA, the combined agents did not increase the inhibitory effect of the most active single compound alone. This result indicates that there was little interaction between ML and A, HCl and LA. However, the combination of 150$\mu\textrm{g}$/mL ML and 250$\mu\textrm{g}$/mL CA synergistically inhibited growth of E. coli O157:H7. The present study showed that the nature of combined antimicrobial response against E. coli O157:H7 was complex, but this information would be useful for determining interaction that could compromise effectiveness in food systems.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4028-4034
• /
• 2012

Tris(2-phenylphenoxo)aluminum ($(2-PhC_6H_4O)_3Al$) exists as a dimeric form in toluene. When toluene-insoluble anhydrous cobalt acetate is treated with tris(2-phenylphenoxo)aluminum in toluene, the toluene-soluble adduct $(2-PhC_6H_4O)_3Al{\cdot}Co(OAc)_2$ is formed. The 2-phenylphenoxo ligand in the adduct can be replaced with another aryloxo ligand to give (aryloxo)$(2-PhC_6H_4O)_2Al{\cdot}Co(OAc)_2$ (aryloxo = 2-methylphenoxo, 2-isopropylphenoxo, 4-methylphenoxo, 4-isopropylphenoxo, or 4-tert-butylphenoxo). These complexes are active for butadiene polymerization without gel formation when activated with an equivalent amount of $(2-PhC_6H_4O)AlEt_2$ for 2 h. The highest activity, 175 kg/mol-Co (turnover number, 3200) was achieved with $(2-PhC_6H_4O)_3Al{\cdot}Co(OAc)_2$ at $65^{\circ}C$ for 2 h. The microstructure of the polymer chains is mostly trans-1,4-configuration (70-75%) with the remaining being 1,2-vinyl. The cis-1,4-configuration observed by IR is minimal (1-5%). By replacing the 2-phenylpheoxo with a 4-alkylphenoxo ligand, the amount of 1,4-configuration slightly increases, resulting in increase in the endothermic melting signal at $-30{\sim}50^{\circ}C$ in the DSC curve. The molecular weights of the polymers are high ($M_n$: 300000~800000) with a fairly narrow molecular weight distribution ($M_w/M_n$, 2.0-2.7).

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.635-638
• /
• 2020

We prepared spherical silica by minimizing the amount of oil through water/oil (W/O) emulsion. The spherical silica was successfully synthesized by using 20 to 60 mL of hexane as an oil for 283 g of water glass. The size of silica was dependent on the amount of oil where the size of silica particles increased as the amount of oil increased. The specific surface areas of samples measured using the BET method were 186 to 230 ㎡/g. X-ray fluorescence (XRF) analysis results showed that the SiO2 content was more than 90% while sodium was 3.27~4.5 wt. %. The spherical silica prepared in this study could be optimized for mass synthesis and commercialization because the industrial sodium silicate solution was used as a precursor of Si as well as the minimum amounts of hexane and nonionic surfactant were employed.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.755-762
• /
• 1996

Background : Continuous positive airway pressure(CPAP) is doubtlessly using as a medical treatment of choice for patients with obstructive sleep apnea (OSA) syndrome. CPAP is effective in OSA patients as a physical "pneumatic pressure splint" mechanism. We have done this study for two purposes, first to seek for the factors to determine the optimal CPAP titer, second to predict the minimal CPAP titer using the determined factors. Methods: We studied a 72 OSA patients who were treated with CPAP. All of them were studied by using a two nights polysomnographic rests in hospital. We compared the patients requiring CPAP over $10cmH_2O$ with those who required CPAP under 5cm $H_2O$ to determine the factors affecting the minimal CPAP titer. Results : The high CPAP group is characterized by a significantly higher body mass index(BMI), apnea index(AI) and apnea and hyponea index(AHI) and significantly lower lowest $SaO_2$. Regression analysis using the optimal four variables resulted in the following prediction equation for CPAP titer. CPAPtiter=8.382 + 0.064 ${\times}$ BMI + 0.077 ${\times}$ AI - 0.004 ${\times}$ AHI - 0.077 ${\times}$ lowest $SaO_2$ When this regression equation was applied to the 72 patients, the mean CPAP titer as predicted by the above equation was $7.80{\pm}2.96$ mmHg. Compared this value with actually determined CPAPtiter, $7.93{\pm}4.00$mmHg, there was no significant difference between the two values. Conclusion: Obesity, apnea severity and lowest Sa02 were strongly correlated with CPAP titer. Linear regression equation for CPAP titer using these indices predicted very closely the actually measured values in the sleep laboratory.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2009

Essential oils are mixture of volatile, lipophilic compounds originating from plants. Essential oils have potential biological effects, i.e., antibacterial, antifungal, spasmolytic and antiplasmodial activities and insect-repellent property. In this study, five essential oils, namely R, LG, FR, O, and NM, extracted from various aromatic plants were used to test their antimicrobial activity against the oral microorganisms. The effects of essential oils were investigated against eight important bacteria, Streptococcus mutans (S. mutans), Staphylococcus aureus (S. aureus), Streptococcus sanguis (S. sanguis), Streptococcus anginosus (S. anginosus), Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans), Streptococcus sobrinus (S. sobrinus), Staphylococcus epidermidis (S. epidermidis), and Escherichia coli (E. coli). Essential oils, except NM, effectively inhibited the growth of tested oral pathogenic microorganisms dose-dependently. However, the essential oils didn't show a significant inhibitory effect against E. coli and S. epidermidis. Consequently, these results represented that essential oil-mediated anti-microbial activity was prominent against the oral pathogenic bacteria. For example, minimum bactericidal concentration(MBC) of R, LG, FR oil against A. actinomycetemcomitans was very low as 0.078 mg/mL. In addition, minimum inhibitory concentration (MIC) of R, LG, FR, O oil against S. mutans was low as 0.156 mg/mL in vitro.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.3-13
• /
• 2002

The characteristics of cyanide decomposition in aqueous phase by hydrogen peroxide have been explored in an effort to develop a process to recycle waste water. The self-decomposition of $H_2O$$_2$at pH 10 or below was minimal even in 90 min., with keeping about 90% of $H_2O$$_2$undissociated. On the contrary, at pH 12 only 9% of it remained during the same time. In the presence of copper catalyst at 5 g Cu/L, complete decomposition of $H_2$O$_2$was accomplished at pH 12 even in a shorter time of 40 min. The volatility of free cyanide was decisively dependent on the solution pH: the majority of free cyanide was volatilized at pH 8 or below, however, only 10% of it was volatilized at pH 10 or above. In non-catalytic cyanide decomposition, the free cyanide removal was incomplete in 300 min. even in an excessive addition of $H_2$$O_2$at a $H_2$$O_2$/CN molar ratio of 4, with leaving behind about 8% of free cyanide. On the other hand, in the presence of copper catalyst at a Cu/CN molar ratio of 0.2, the free cyanide was mostly decomposed in only 16 min. at a reducedH202/CN molar ratio of 2. Ihe efnciency of HBO2 in cyanide decomposition decreased with increasing addition of H2O2 since the seu-decomposition rate of $H_2$$O_2$increased. At the optimum $H_2$$O_2$/mo1ar ratio 0.2 of and Cu/CN molar ratio of 0.05, the free cyanide could be completely decomposed in 70 min., having a self-decomposition rate of 22 mM/min and a H$_2$$O_2$ efficiency of 57%.