• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.399-402
• /
• 2000

For improvement of B constant in $CaMnO_3$-$CaTiO_3$ perovskite type thermistors, effect of $Cr_2$$O_3$ addition ranged from 0.0wt% to 5.0wt% on electrical properties were investigated with contents and sintering temperatures in the view of crystal and microstructures. The solubility limit of Cr$_2$O$_3$was up to 0.5wt% judging from the result of lattice parameter. The grain size was decreased and the resistance at room temperature and B constant were increased with the addition of $Cr_2$$O_3$.On particular, B constant of$CaMnO_{3-x}$$Cr_2$$O_3$ system was increased greatly from 1574k to 2598k at 0.5wt% $Cr_2$$O_3$addition. Further addition of $Cr_2$$O_3$, however, resulted in the decrease of the resistance and B constant due to the $Cr_2$$O_3$ precipitation on the grain boundary. As the$CaTiO_3$contents increased in the $CaMnO_3$-$CaTiO_3$ system, the resistance at room temperature and B constant were highly changed.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.372-378
• /
• 2009

The coloring agents $Cr_2O_3$ and $CrCl_3$ were manipulated in this study to synthesize ZnO-$Al_2O_3-Cr_2O_3$ system pigments by changing their mixing ratio. The addition of varying amounts of mineralizer was also tested to obtain better color development of the pink pigment. In the synthesis of ZnO- $Al(OH)_3-Cr_2O_3-CrCl_3$ pigments, the best composition is $Cr_2O_3$-0.1 mole and $CrCl_3$-0.2 mole when $Cr_2O_3$ is partially substituted with $CrCl_3$ to synthesize them. Among the $ZnAl_{1.6-x}Cr_{0.2+x}O_4$ compositions to which a mineralizer was not added, ZnO-1mole, $Al(OH)_3$-1.7 mole, $Cr_2O_3$-0.075 mole, and $CrCl_3$-0.15 mole showed a desirable pink hue. The measurements of pigments $L^*$, $a^*$ and $b^*$, were $L^*$ 81.81, $a^*$ 16.65 and $b^*$ 0.45, and when the synthesized pigments were applied to a zinc glaze, the measurements were $L^*$ 60.41, $a^*$ 28.39, and $b^*$ 16.97. When adding a mineralizer, a 2 wt% addition resulted in the most favorable pink color. The composition for the most favorable result that included a mineralizer was $Al(OH)_3$-1.8 mole, $Cr_2O_3$-0.05 mole, and $CrCl_3$-0.1 mole, and the calcination temperature was $1250^{\circ}C$. The pigment color analysis showed $L^*$ 82.52, $a^*$17.14 and $b^*$-1.18, and the measurements of $L^*$, $a^*$ and $b^*$ in the glaze were $L^*$ 60.97, $a^*$ 28.77 and $b^*$ 13.72.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.42-52
• /
• 1985

Several $Al_2O_3$-based polycrystalline which had different dopant ratio in the range of 0.5mol% were prepared by doping pure $Cr_2O_3$ $HfO_2$. Single crystalline which had same composition with above polycrystalline were made by means of floating zone method. This study examined the role of each dopant for enhancing the mechanical properties of $Al_2O_3$-based Ceramics. Optical micrographs $({ imes}200)$ of $Al_2O_3-Cr_2O_3$ single crystal showing not only radial crack (rc) on the specimen surface but median crack(mc) and lateral crack(lc) under surface at the edge of indentation mark. Fracture toughness of Al2O3-based Ceramics was increased with $ZrO_2$ content. Alloying effect of $Cr_2O_3$ contributed to the hardness of $Al_2O_3$ based ceramics.

• 한국세라믹학회지
• /
• 제22권5호
• /
• pp.71-75
• /
• 1985

This study deals with sintering and corrosive behavior of sintered zircons mixed with 5wt% of clay $Cr_2O_3$ $CrO_3-MgO$ aqueous solution and $CrO_3-Mg(OH)_2$ aqueous solution. Measurements were conducted by firing specimens at 135$0^{\circ}C$ 145$0^{\circ}C$ and 155$0^{\circ}C$ 1$650^{\circ}C$ for 3hrs in oxidized and reduced atmospheric conditions. Following results were obtained. 1. Sintered zircon with 5 wt% clay showed that highest compressive strength and the lowest apparent porosity and the other showed less positive result than above specimen in order of zircon with $CrO_3-MgO$ aqueous solution $CrO_3-Mg(OH)_2$ aqueous solution and $Cr_2O_3$. 2. The more firing temperature increased the more its strength improved and porosity decreased and specimen which was fired over 155$0^{\circ}C$ and in reduced atmospheric condition showed better results. 3. Zircon with additives which was fired over 155$0^{\circ}C$ showed the evidence of thermal dissociation but it was not rebonded completely during cooling. 4. Zircon with $CrO_3-MgO$ aqueous solution and $CrO_3-Mg(OH)_2$ aqueous solutiion showed more corrosive resistance than zircon itself and zircon-clay system.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.293-299
• /
• 1982

The effects of $MnO_2$ and $Cr_2O_3$ on the Piezoelectrictric properties of Pb(Mg1/2W1/2)0.3 Ti0.4 Zr0.3O3 Ceramics. Electromechanical properties in the system in connection with the sintering temperature and the effects of $MnO_2$ and $Cr_2O_3$ addition. The dielectric constant of the ceramics decreased with the additions of $MnO_2$ while the additions of $Cr_2O_3$ increased the value. The Planar coupling factor (Kp) of the ceramics with 0.2wt% $MnO_2$ and with 0.2wt% $Cr_2O_3$ gave the highest value of 0.52 and 0.513 as sintered at 106$0^{\circ}C$, 108$0^{\circ}C$, respectively. The value of mechanical Q-factor were in parallel with the fired density of the ceramics. The optical micrography of the sintered bodies showed that the additions of $MnO_2$ promoted the grain growth, while the additions of $Cr_2O_3$ retarded the grain growth.

• 한국환경과학회지
• /
• 제15권3호
• /
• pp.221-227
• /
• 2006

Oxidative TCE decomposition over $TiO_2$-supported single and complex metal oxide catalysts has been conducted using a continuous flow type fixed-bed reactor system. Different types of commercial $TiO_2$ were used for obtaining the supported catalysts via an incipient wetness technique. Among a variety of titanias and metal oxides used, a DT51D $TiO_2\;and\;CrO_x$ would be the respective promising support and active ingredient for the oxidative TCE decomposition. The $TiO_2-based\;CrO_x$ catalyst gave a significant dependence of the catalytic activity in TCE oxidation reaction on the metal loadings. The use of high $CrO_x$ contents for preparing $CrO_x/TiO_2$ catalysts might produce $Cr_2O_3$ crystallites on the surface of $TiO_2$, thereby decreasing catalytic performance in the oxidative decomposition at low reaction temperatures. Supported $CrO_x$-based bimetallic oxide systems offered a very useful approach to lower the $CrO_x$ amounts without any loss in their catalytic activity for the catalytic TCE oxidation and to minimize the formation of Cl-containing organic products in the course of the catalytic reaction.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.73-80
• /
• 1999

The effect of alloy compositions of the bond coating on the plasma sprayed-thermal barrier coatings was investigated. The performance of the coating composed of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ and Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$was evaluated by isothermal and thermal cyclic test in an ambient atmosphere at 115$0^{\circ}C$. The failure of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ coatings was occurred at the bond coating/ceramic coating interface while Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ coating was failed at the substrate/bond coating interface after thermal cyclic test. The lifetime of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$coatings was longer than Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$coating. The oxidation rate of the NiCrAl bond coating examined by TGA was lower than CoNiCrAlY bond coatings. In summary, these results suggest that Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$system as thermal barrier coating be not suitable considering the durability of the coating layer for high temperature oxidation and thermal stress.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1867-1872
• /
• 2012

The 5-parameter Morse potential (5-MP) method for the interaction between O atom and Cr surfaces is constructed in the present work. The adsorption of O on Cr (100), (110), (111), and (211) surfaces are studied with 5-MP in detail. The fourfold hollow site of the Cr (100) surface is favored for O atom. On Cr (110), quasithreefold site is favored with the parallel frequencies (the frequencies of O atom paralleling the metal surface) of 342 and 538 $cm^{-1}$, and perpendicular frequency (the frequency of O atom perpendicular to the metal surface) at 526 $cm^{-1}$. On Cr (111), the most favored mode for O atom is found to be the quasi-threefold site with the perpendicular frequency at 553 $cm^{-1}$ and the parallel frequencies at 253 and 399 $cm^{-1}$. According to our calculation results, we speculate the most preferred mode for O adsorption on Cr (211) surface is the quasithreefold site with the perpendicular frequency at 583 $cm^{-1}$ and the parallel frequencies at 449 and 185 $cm^{-1}$.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.368-375
• /
• 2006

순수한 아나타제 구조로 이루어진 DT51D $TiO_2$에 $CrO_x,\;FeO_x,\;MnO_x,\;LaO_x,\;CoO_x,\;NiO_x,\;CeO_x,\;CuO_x$와 같은 단일 산화물 촉매를 각각 5 wt.% 담지하여 모델반응으로 선택한 기상 TCE 제거반응을 수행하였으며, 이로부터 얻어진 결과를 바탕으로 $CrO_x/TiO_2$-based 복합 산화물 촉매상에서 TCE 산화반응을 연구함으로써 유해 중금속의 사용량을 최소화하기 위한 최적의 촉매 디자인 방법을 도출하고자 하였다. DT51D $TiO_2$에 담지된 여러 단일 금속 산화물들 중에서 기상 TCE 제거반응에 대하여 $CrO_x$가 가장 우수한 촉매활성을 보이는 것으로 나타났으며, 반응온도의 함수로 얻어진 TCE 제거반응의 활성은 $CrO_x$의 담지량에 의존하였다. 5 wt.% $CrO_x$-based 복합 산화물 촉매는 10 wt.% $CrO_x$만으로 이루어진 단일 산화물 촉매와 거의 동일한 수준의 TCE 제거반응 활성을 보였을 뿐만 아니라 이 복합 산화물 촉매들은 10 wt.% $CoO_x,\;MnO_x,\;FeO_x,\;NiO_x$ 등과 같은 단일 산화물 촉매들보다 높은 반응활성을 갖는 것으로 나타났다. 단일 산화물 촉매의 반응활성과 비교하였을 때 5 wt.% $CrO_x$-based 복합 산화물 촉매상에서 TCE 제거반응 동안에 얻어지는 반응활성의 증가 정도는 $420^{\circ}C$ 이하의 반응온도 기준으로 약 $10{\sim}80%$ 이상이었다. 따라서, CVOCs 제거반응을 위하여 널리 사용되고 있는 단일 $CrO_x/Al_2O_3$ 촉매보다는 $CrO_x$의 사용량을 최소화하면서도 우수한 반응활성을 얻을 수 있는 $CrO_x/TiO_2$-based복합 산화물 촉매가 보다 바람직하며 하나의 대안적인 촉매 디자인 방법으로 응용될 수 있을 것으로 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.638-641
• /
• 1999

In consideration of Dielectric loss and Temperature stability, 3-element system dopped with NiO, $Cr_2O_3$, well-known as Hardner and Stabilizer whose primary element is PZT was eximanated its structure, Temperature Coefficient of Capacitor, relative resistivity for Temperature Compensation condensor study. dopping with Nio, $Cr_2O_3$, Temperature Characteristic is developed, Dielectric loss largely represented useful1 small values in specimens dopped with NiO 0.2wt%, and specimence sintered at $110^{\circ}C$ dopped with $Cr_2O_3$, 0.1wt% also relative resistivity largely showed tendency of decrement According to dopping NiO more.