• 한국경제지리학회지
• /
• 제17권4호
• /
• pp.688-701
• /
• 2014

본 연구는 부산신발산업의 집적과 쇠락요인을 산업클러스터의 경쟁력이라는 이론적 관점에서 접근한다. 이를 위해 M. Porter의 클러스터 모델을 재구성한 '산업클러스터의 구성요소와 연계 모형'을 제시하고 그것에 기초하여 부산신발산업의 집적화와 쇠락에 영향을 미친 요인들을 검토하였다. 그리고 신발산업의 부산지역 집적 및 쇠락과정과 현황을 고찰하고 부산지역 신발업체들을 대상으로 관련 설문조사를 실시하였다. 분석 결과, 부산신발산업의 집적 및 쇠락과정은 상당히 복잡한 요인들에 의해 영향을 받았지만, 노동집약적 경공업의 특성상 노동력 등 투입요소부문이 가장 결정적인 영향변수였던 것으로 나타났다. 그리고 1970년대 중반 이후 OEM 생산을 본격화하면서 글로벌 생산네트워크에 편입된 바, 그것에의 진입과 배제과정에서 산업클러스터의 성쇠가 보다 급격히 발생한 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.211-211
• /
• 2000

Carbon nanotubes (CNTs) have been spotlighted as one of promising field emission displays(FEDs). For the first time, to authors knowledge, we have developed the 9" color CNT-FEDs with the resolution of 240x576 lines. The 9" CNT-FEDs with diode-type and triode-type structures are presented. The well-dispersed CNT paste was squeezed onto the metal-patterned cathode glass. For the anode plate, the Y2O2S:Eu, ZnS:Ag,Cl low-voltage phosphors were printed for red, green, and blue colors, respectively. The vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images were demonstrated at 2 V/um. High brightness of 800, 200, and 150cd/m2 was observed on the green, red, and blue phosphors at V/um, respectively. Field emission characteristics of a triode-type CNT-FED were simulated using a finite element method. the resultant field strength on the cathode was modulated by gate bias and emitted electrons were focused on the anode. A relatively uniform emission image was experimentally achieved at the 800V anode. A relatively uniform emission image was experimentally achieved at the 800V anode and the 50-180 V gate biases. Energy distribution of electrons emitted from CNTs was measured using an energy analyzer. The maximum peak of energy curve corresponded to the Fermi energy level of CNTs. The whole fabrication processed of CNT-FEDs were fully scalable and reproducible. Our CNT-FEDs has demonstrated the high potential of large-area and full-color applications with very low cost fabrication and low power consumption.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권11호
• /
• pp.1686-1694
• /
• 2019

Objective: Lignin plays a relevant role in the inhibition of cell wall (CW) structural carbohydrate degradation. Thus, obtaining accurate estimates of the lignin content in tropical plants is important in order to properly characterize the mechanism of lignin action on CW degradation. Comparing conflicting results between the different methods available for commercial use will bring insight on the subject. This way, providing data to better understand the relationship between lignin concentration and implications with tropical forage degradation. Methods: Five grass species, Brachiaria brizantha cv $Marand{\acute{u}}$, Brachiaria brizantha cv $Xara{\acute{e}}s$(MG-5), Panicum maximum cv Mombaça, Pennisetum purpureum cv Cameroon, and Pennisetum purpureum cv Napier, were harvested at five maturity stages. Acid detergent lignin (ADL), Klason lignin (KL), acetyl bromide lignin (ABL), and permanganate lignin (PerL) were measured on all species. Lignin concentration was correlated with in vitro degradability. Results: Highly significant effects for maturity, lignin method and their interaction on lignin content were observed. The ADL, KL and ABL methods had similar negative correlations with degradability. The PerL method failed to reliably estimate the degradability of tropical grasses, possibly due to interference of other substances potentially soluble in the $KMnO_4$ solution. Conclusion: ADL and KL methods use strong acid ($H_2SO_4$) and require determination of ash and N content in the lignin residues, therefore, increasing time and cost of analysis. The ABL method has no need for such corrections and is a fast and a convenient method for determination of total lignin content in plants, thus, it may be a good option for routine laboratory analysis.

• 지구물리와물리탐사
• /
• 제14권1호
• /
• pp.88-97
• /
• 2011

최적화된 4진트리 격자화 기법을 이용한 중력변화율 탐사의 지형 효과 계산 방법을 제시하고자 한다. 제시하고자 하는 방법은 항공탐사의 자료처리를 위하여 지형 자료에 최적화된 빠르고 정확한 지형효과 계산법이다. 각 지점에서의 지형효과 계산에 이용되는 지표 고도 자료는 자동적으로 원하는 정밀도를 제공할 수 있는 최대 크기로 격자화 되어 최대 해상도 자료를 이용하는 방법에 비하여 빠른 계산이 가능하다. 이러한 최적화된 격자 크기는 각 지점에서의 거리와 지표의 고도 변화를 고려하여 구성된다 새로운 접근 방법을 검증하기 위하여 수치모델링과 현장자료에 적용하였다. 현장 자료에 적용한 결과 최적 4 진트리 기법은 최고 해상도 자료를 모두 이용한 방법과 비교하여 중력 변화율 자료에서 1EU(E$\"{o}$tv$\"{o}$s unit)의 정밀도를 유지하면서 계산양은 1/351로 줄일 수 있었다. 또한, 중력탐사 결과의 지형보정에 이용한 결과 모든 DEM자료를 이용한 계산에 비하여 310배나 빠른 계산이 가능하였다.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.114-125
• /
• 1978

The use of petroleum fuels in grain drying causes problems of high cost and management. To solve these problems, it is required to study on soLar energy as an alternative to petroleum fuels for grain drying. The purposes of this study were to find out the optimum received area and air flow rate of a flat-plate solar air collector for grain drying and to assess its effects on grain drying with a small grain bin. The results of this study are summarized as follows ; 1. The calculated optimum tilt angles of the collector in the summer and autumn drying seasons were 20 and 50 degress, respectively, in suwon area. 2. The outlet temperature of the collector was $36^\circ C$ on the daily average with the maximum of $36^\circ C$ at 12:00 o clock. Solar radiation on the collector surface was 1.04 ly( 1 langley = 1 cal/$cm^2$) per minute on the daily average and 1.30 ly per minute on the maximum at 11:00am. The thermal efficiency of the collector was 62.4 percent on the daily average, and the air flow-rate per unit receiving are was 1.03 $m^3$/min/$m^2$.4. The calculated optimum receiving area and the air flow-rate per unit cubic volume for paddy in autumn drying season was 2 $m^2$ and 2$m^3$/min , respectively. 5. not significantly difference in the collector efficiency was appeared between the rotating and fixed type of solar collector. 6. For drying of wheat with 0.6 meter of the depth in the bin, approximately 9 hours were required to reduce the moisture content from 21.6% to 13% with air follow rate of 5 $m^3$/min an initial moisture per cubic meter of wheat and with air temperature of $52^\circ C$. 7. In the drying test of rough rice with a turning operation in a grain bin approximately 21 hours were required to reduced the moisture from 21% to 14.5% with airflow rate of 2 $m^3$/min per cubic meter of rice and the air temperature of $43.5^\circ C$. 8. Over-drying at the bottom and less -drying at the top of the grain mass was resulted from the high -temperature of drying air which was obtained from the flat-plate solar collector in this test. An appropriate operation should be prepared for the uniform moisture of the grain in the bin.

• 한국농림기상학회지
• /
• 제12권4호
• /
• pp.277-288
• /
• 2010

다중 수증기/이산화탄소 연직농도시스템(이하 프로파일시스템)은 에디공분산 방법에 의해 측정된 에너지 및 물질 플럭스에 대한 저류항 및 이류의 영향을 정량화하기 위해 광범위하게 이용되고 있다. 본 연구에서는 현재 사용되고 있는 프로파일시스템의 용도를 보다 확장하여 안정동위원소 분석을 위한 공기시료 채취에 활용하였다. 프로파일시스템에서 기체농도 측정에 이용되는 적외선기체분석기의 유출부에 2L 용량의 진공 플라스크를 연결하여 수증기와 이산화탄소의 농도가 측정된 공기시료가 채취되도록 개조하였다. 이 방법의 적용성을 검증하기 위하여 광릉 활엽수림 내에 설치되어 있는 플럭스타워에서 8개의 높이(0.1~40m)로 부터 공기시료를 채취하였다. 플라스크에 채취된 공기시료로부터 실험실에서 진공추출라인을 이용하여 순수한 수증기와 이산화탄소가 분리되었고, 질량분석기를 이용하여 수증기의 수소 안정동위원소 조성 그리고 이산화탄소의 탄소 안정동위원소 조성을 각각 측정하였다. 이와 같은 방법으로 얻어진 자료를 이용하여 산림내 수증기의 수소 안정동위원소 조성과 이산화탄소의 탄소 안정동위원소 조성의 수직적 분포를 확인하였고, 아울러 Keeling plot 을 적용하여 증발산된 수증기의 수소 동위원소 조성 및 생태계 호흡에 의해 발생된 이산화탄소의 탄소동위원소 조성을 산출하였다. 비록 현단계에서 여러 가지 기술적인 개선점이 존재하지만, 본 연구에서 이용한 방법은 기존에 활용되고 있는 방법과 비교하여 두 가지 장점이다. 첫째, 이 방법은 기존에 운용되고 있는 프로파일 시스템의 구조를 그대로 활용함으로써 상대적으로 저비용으로 이용이 가능하다. 둘째, 수증기와 이산화탄소의 동시 시료채취와 동위원소 분석이 가능하여 증발산 및 순생태교환량 구성요소의 구분이 동일한 시간적 해상도로 이루어질 수 있다. 이러한 결과는 생태계 물과 탄소 순환 과정의 상호관련성에 대한 보다 향상된 이해를 위한 기본 자료로 활용될 수 있을 것으로 기대된다.

• 자원리싸이클링
• /
• 제9권1호
• /
• pp.36-43
• /
• 2000

본 연구는 B 염색조합 공동폐수처리장의염색폐수 처리공정중 Fenton 공정에서 발생되는 무기슬러지의 처리 및 재활용에 관한 연구로서, Pilot plant에 의하여 재용해철($Fe^{3+}$)과 FECL의 혼합용액을 사용한 연속식 산화실험 결과, 처리수의 $COD_{cl}$ 는 대략 100 mg/l이하였으며 이때 $COD_{cl}$제거율은 78.9%로 $H_2O_2/Fe^{total}$가 대략 1.5범위에서 최적치를 나타내었다. 슬러지의 용해공정 후에 배출되는 2차 슬러지에 대하여 3성분을 측정하여 1차 슬러지와 비교해 볼 때 회분은 약 85%가 감소되었으며, 건조기준 총 슬러지는 약 65%의 감량율을 나타내었고, 슬러지의 속의 철염의 재용해율은 대략 90~95%정도였다 슬러지 재활용공정의 예상투자비용은 시설용량 30,000 $m^3$/d/d 기준으로 약 3.5억원이 소요되며, 예상운영비는 하루에 약 130만원(연간 4.2억원)의 절감을 예상할 수 있으며, 투자비에 대한 이자비용을 감안하면 설비투자비용에 대한 투자자본금 회수기간(PP)은 약 10.5개월이 필요하고, 회계적이익율(ARR)은 179%, 순현재가치(NPV)는 7.92억원, 내부수익률(IRR)은 약 110%로 충분한 투자가치가 있는 것으로 판명되었다.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.231-243
• /
• 1994

본 연구에서는 하천본류의 유량과 수질, 하수처리장 유입수량과 유입수질을 확률변수로 두고, 취수 문제와 수중보에 의한 재포기현상을 포함하는 추계학적 하천수질관리모형을 개발하였다. Streeter-Phelps식을 이용해서 각 구간 하천수질의 기대값과 분산을 계산하는 확률모형을 만들고, 최적화문제의 확률적 제약식은 chance constrained 방법을 이용해서 확정적 제약식으로 변환한다. 목적함수는 지역내 하수처리장의 년간처리비용으로 두었다. 건설비용함수와 유지관리비함수는 처리효율과 처리용량의 함수인 비선형의 단일식으로 유도되었다. 최적화문제는 비선형계획법으로 해를 구하였다. 본 모형을 한강하류부에 적용한 결과 서울시내 4개 하수처리장에서 2차처리를 하고, 지천유입수의 BOD부하량이 현재와 같을 때, 1996년 DO수질기준을 만족하는 신뢰도는 50% 정도였다. 그리고 탄천, 중량천, 안양천의 BOD부하량을 현재보다 50% 감소시켰을 때 1996년 DO수질기준을 만족하는 신뢰도는 60% 이상이었다. 따라서 한강하류부의 수질보전을 위해서는 유입지천의 수질개선과 2차처리 이상의 하수처리가 요구된다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.