• 설비공학논문집
• /
• 제7권4호
• /
• pp.622-632
• /
• 1995

The present numerical study is aimed to investigate time-dependent characteristics of a two-dimensional lid-driven square cavity flow of three high Reynolds numbers, $7.5{\times}10^3$, $10^4$ and $3{\times}10^4$. A conservative convection term on irregular grids was adopted by renewing the MAC type difference schemes on regular grids. Relaxation of velocity and pressure is implemented by SOLA algorithm. In case of $Re=7.5{\times}10^3$, flow behavior converges to steady state after a transient period. But for $Re=10^4$, periodic unsteady sinusoidal fluctuation of local velocity and kinetic energy is found and continuous movements of small eddies in the secondary flow regions are also discovered. Random generation of eddies and their active migrating behavior are detected for $Re=3{\times}10^4$, resulting in complete unsteady and non-linear flow characteristics. And, an organized structure similar to a Moffat vortex is also observed from the time-mean flow patterns. Furthermore, a typoon-like vortex(TLV) appears intemittently and rotates along the separation regions and boundary layers.

• 한국해안해양공학회지
• /
• 제15권2호
• /
• pp.108-115
• /
• 2003

천수방정식에 기초한 ADCIRC 유한요소모형을 이용하여 지진해일 전파를 수치모의할 때 분산효과를 고려하기 위한 두 가지 일차원 분산보정기법을 개발하였다. 첫 번째 방법은 음해법으로, 각 시간단계의 공간미분항에 부여되는 가중치를 조정함으로써 분산보정을 수행한다. 두 번째는 양해법으로, 유한요소의 크기를 조정하여 분산을 고려한다. 새로운 기법을 이용하여 계산한 수치해와 파의 분산효과를 고려한 해석해의 비교를 통해 본 연구에서 제안한 분산보정기법의 타당성을 확인하였다.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.299-310
• /
• 2016

In practical wireless relay communication systems, non-destination nodes are assumed to be idle not receiving signals while the relay sends messages to a particular destination node, which results in reduced bandwidth efficiency. To improve the bandwidth efficiency, we relax the idle assumption of non-destination nodes and assume that non-destination nodes may receive signals from sources. We note that the message relayed to a particular node in such a system gives rise to interference to other nodes. To study such a more general relay system, we consider, in this paper, a relay system in which the relay first listens to the source, then routes the source message to the destination, and finally produces interference to the destination in sending messages for other systems. We obtain capacity upper and lower bounds and study the optimal method to deal with the interference as well as the optimal routing schemes. From analytic results obtained, we find the conditions on which the direct transmission provides higher transmission rate. Next, we find the conditions, by numerical evaluation of the theoretical results, on which it is better for the destination to cancel and decode the interference. Also we find the optimal source power allocation scheme that achieves the lower bound depending on various channel conditions. We believe that the results provided in this paper will provide useful insights to system designers in strategically choosing the optimal routing algorithms depending on the channel conditions.

• 한국통신학회논문지
• /
• 제38A권10호
• /
• pp.845-849
• /
• 2013

본 논문에서는 Galileo 시스템에 사용할 이진 옵셋 반송파 (binary offset carrier: BOC) 신호의 자기상관함수가 갖는 주변 첨두를 제거하기 위해 국소신호를 설계한다. 구체적으로는 BOC 신호를 분석하여 기존 기법의 국소신호가 사인 혹은 코사인 위상의 BOC 신호에만 적용되는 것을 밝히고, 사인과 코사인 위상 BOC 신호에 모두 적용 가능한 국소신호를 설계한다. 이후 설계한 국소신호와 수신 BOC 신호를 상관하고 상관한 부상관함수를 조합함으로써 주변 첨두가 제거된 상관함수를 생성한다. 모의실험을 통해 설계한 국소신호를 이용하여 생성한 상관함수는 주변 첨두가 모두 제거될 뿐만 아니라 설계한 국소신호는 사인과 코사인 위상 BOC 신호에 모두 적용되는 것을 확인한다.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.589-600
• /
• 2013

In this paper, we propose a new feedback scheme called mode selection-based feedback by scheduling probability prediction (SPP-MF) for channel state feedback in OFDMA downlink system. We design the scheme such that it determines the more desirable feedback mode among selective feedback by scheduling probability prediction (SPP-SF) mode and bitmap feedback by scheduling probability prediction (SPP-BF) mode, by calculating and comparing the throughputs of the two modes. In both feedback modes, each user first calculates the scheduling probability of each subchannel (i.e., the probability that a user wins the scheduling competition for a subchannel) and then forms a feedback message based on the scheduling probability. Specifically, in the SPP-SF mode, each user reports the modulation and coding scheme (MCS) levels and indices of its best S subchannels in terms of the scheduling probability. In the SPP-BF mode, each user determines its scheduling probability threshold. Then, it forms a bitmap for the subchannels according to the scheduling probability threshold and sends the bitmap along with the threshold. Numerical results reveal that the proposed SPP-MF scheme achieves significant performance gain over the existing feedback schemes.

• 천문학회보
• /
• 제36권1호
• /
• pp.34.1-34.1
• /
• 2011

Combining a detailed non-grey radiative transfer computation with the three dimensional hydrodynamics, we investigate a reliable numerical scheme for turbulent convection in the solar surface. The solar photosphere is the extremely turbulent region composed of partly ionized compressible gases in high temperature. Especially, the super adiabatic layer (SAL) near the solar photosphere is the shallow transition region where the energy transport varies steeply from convection to radiation. In order to describe physical processes accurately, a detailed treatment of radiative transfer should be considered as well as the high resolution computation of fluid dynamics. For a direct computation of radiation fields, the Accelerated Lambda Iteration (ALI) methods have been applied to hydrodynamical medium, incorporating the Opacity Distribution Function (ODF) as a realistic schemes for non-grey problems. Computational domain is the rectangular box of dimensions $42{\times}3Mn$ with the resolution of $1202{\times}190$ meshed grids, which covers several granules horizontally and 8 ~ 9 pressure scale heights vertically. During several convective turn-over times, the 3-D snapshots have been compiled with a second order accuracy. In addition, our radiation-hydrodynamical computation has been compared with the classical approximations such as grey atmospheres and Eddington approximation.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.905-910
• /
• 2012

This paper reports an investigation of pulse width modulation (PWM) techniques for twophase brushless DC (BLDC) motors fed by a two-phase eight-switch inverter in a fan application. The three-phase BLDC motor is widely applied in industry; however, a lower-cost two-phase BLDC motor and drive circuit has been greatly in demand in recent years. In this paper, we introduce a mathematical model of the two-phase BLDC motor with sinusoidal back electromotive forces (EMFs) based on traditional three-phase BLDC motors. To simplify the drive algorithm and speed up its application, we analyze the principle of block commutation for a two-phase BLDC motor drive in the 180-electricaldegree conduction mode, and we further propose five PWM schemes to improve the commutation performance of the two-phase BLDC drive. The effectiveness of the proposed PWM methods is verified through experiments.

• 대한산업공학회지
• /
• 제29권4호
• /
• pp.312-320
• /
• 2003

Recently there is a growing interest in mobile cellular network providing multimedia service. However, the link bandwidth of mobile cellular network is not sufficient enough to provide satisfactory services to users. To overcome this problem, an adaptive framework has been proposed. In this study, we propose a new method of estimating DPR(Degradation Period Ratio) in an adaptive multimedia network where the bandwidth of ongoing call can be dynamically adjusted during its lifetime. DPR is a QoS(Quality of Service) parameter which represents the ratio of allocated bandwidth below a pre-defined target to the whole service time of a call. We improve estimation method of DPR using DTMC(Discrete Time Markov Chain) model by calculate mean degradation period, degradation probability more precisely than in existing studies. Under Threshold CAC(Call Admission Control) algorithm, we present analytically how to guarantee QoS to users and illustrate the method by numerical examples. The proposed method is expected to be used as one of CAC schemes in guaranteeing predefined QoS level of DPR.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.198-205
• /
• 2005

The mechanical system of a drive can often be modeled as a two- or three-mass-system. The load is coupled to the driving motor by a shaft able to perform torsion oscillations. For the automatic tuning of the control, it is necessary to know the mathematical description of the system and the corresponding parameters. As the manpower and setup-time necessary during the commissioning of electrical drives are major cost factors, the development of self-operating identification strategies is a task worth pursuing. This paper presents an identification method which can be utilized for the assisted commissioning of electrical drives. The shaft assembly can be approximated as a two-mass non-rigid mechanical system with four parameters that have to be identified. The mathematical background for an identification procedure is developed and some important implementation issues are addressed. In order to avoid the excitation of the system with its natural resonance frequency, the frequency response can be obtained by exciting the system with a Pseudo Random Binary Signal (PRBS) and using the cross correlation function (CCF) and the auto correlation function (ACF). The reference torque is used as stimulation and the response is the mechanical speed. To determine the parameters, especially in advanced control schemes, a numerical algorithm with excellent convergence characteristics has also been used that can be implemented together with the proposed measurement procedure in order to assist the drive commissioning or to achieve an automatic setting of the control parameters. Simulations and experiments validate the efficiency and reliability of the identification procedure.

• 한국통신학회논문지
• /
• 제37권5A호
• /
• pp.298-304
• /
• 2012

본 논문에서는 비정규 잡음 환경에서 orthogonal frequency division multiplexing 시스템의 주파수 옵셋을 신뢰성 있게 추정하는 기법들을 제안한다. 먼저 비정규 잡음을 복소 등방성 Cauchy 확률과정으로 모형화한 후 최대우도 (maximum-likelihood) 추정 기법을 제안하고, 또한 더 간단한 최대우도 추정 기반 준최적 추정 기법을 제안한다. 모의실험 결과를 통해 제안한 기법들이 기존의 기법들에 비해 비정규 잡음 환경에서 더 좋은 주파수 옵셋 추정 성능을 가질 뿐 아니라, 비정규 잡음 환경에서 강인함을 보인다.