• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.147-154
• /
• 2008

Weathered soil slope loses its shear strength if it is exposed in the air for a long time or in contact with water. And this kind of strength loss is remarkable in dam slope which has very big difference in water level according to the season. In this study, shear strength loss of weathered soil due to saturation had been found out through dryness and wetness repetition direct shear test. Also relation between penetration blow number(Nc) and shear strength parameter had been found out through small sized dynamic cone penetration test device and the correlation equation of Nc had been proposed through artificial neural network analysis to estimate shear strength parameter easily.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1131-1137
• /
• 2005

An orthogonal frequency division multiplexing(OFDM) system has the problem of peak-to-average power ratio (PAPR) due to the overlapping phenomena of many sub-carriers. In order to improve the performance of PAPR, we propose in this paper a new genetic sub-block phase weighting(GA-SPW) using the SPW technique. Not only the selecting mapping(SLM) and the partial sequence(PTS) but also the previously proposed SPW becomes more effective as the number of sub-blocks and phase elements increases. However, all of them have limitation on the number of sub-blocks since the searching repetition increases exponentially as the number of sub-blocks increases. Therefore, in this research, a new GA SPW is proposed to reduce the amount of calculation by using Genetic algorithm(GA). In the proposed method, the number of calculations involved in the iterative phase searching yields to depend on the number of population and generation not on the number of sub-blocks and phase elements. The superiority of the proposed method is presented in the experimental results and analysis.

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.233-239
• /
• 2017

Purpose: This study was performed to quantify the repeat rate of imaging acquisitions based on different clinical examinations, and to assess the prevalence of error types in intraoral bitewing and periapical imaging using a digital complementary metal-oxide-semiconductor(CMOS) intraoral sensor. Materials and Methods: A total of 8,030 intraoral images were retrospectively collected from 3 groups of undergraduate clinical dental students. The type of examination, stage of the procedure, and reasons for repetition were analysed and recorded. The repeat rate was calculated as the total number of repeated images divided by the total number of examinations. The weighted Cohen's kappa for inter- and intra-observer agreement was used after calibration and prior to image analysis. Results: The overall repeat rate on intraoral periapical images was 34.4%. A total of 1,978 repeated periapical images were from endodontic assessment, which included working length estimation (WLE), trial gutta-percha (tGP), obturation, and removal of gutta-percha (rGP). In the endodontic imaging, the highest repeat rate was from WLE (51.9%) followed by tGP (48.5%), obturation (42.2%), and rGP (35.6%). In bitewing images, the repeat rate was 15.1% and poor angulation was identified as the most common cause of error. A substantial level of intra- and inter-observer agreement was achieved. Conclusion: The repeat rates in this study were relatively high, especially for certain clinical procedures, warranting training in optimization techniques and radiation protection. Repeat analysis should be performed from time to time to enhance quality assurance and hence deliver high-quality health services to patients

• Journal of Surface Science and Engineering
• /
• v.49 no.4
• /
• pp.331-338
• /
• 2016

In this work, anodic oxidation behavior of AZ31 Mg alloy was studied as a function of $Na_2CO_3$ concentration in electrolyte by voltage-time curves and observation of surface appearances and morphologies after the anodic treatments, using optical microscopy and confocal scanning laser microscopy (CSLM). The voltage-time curves of AZ31 Mg alloy surface and surface appearances after the anodic treatments showed three different regions with $Na_2CO_3$ concentration : region I, below 0.2 M $Na_2CO_3$ where shiny surface with a number of small size pits; region II, between 0.4 M and 0.6 M $Na_2CO_3$ where dark surface with relatively low number of large size burned or dark spots; region III, more than 0.8 M $Na_2CO_3$ where bright surface with or without large size dark spots were obtained. The anodically treated AZ31 Mg alloy surface became significantly brightened with increasing $Na_2CO_3$ concentration from 0.5 M to 0.8 M which was attribute to the formation of denser and smoother surface films. Pits and porous protruding reaction products were found at relatively large size and small size spots, respectively, on the AZ31 Mg alloy surface in low concentration of $Na_2CO_3$ less than 0.2 M. The formation of pits is attributed to the result of repetition of the formation and detachment of porous anodic reaction products. Based on the experimental results obtained in this work, it is concluded that more uniform, denser and smoother surface of AZ31 Mg alloy could be obtained at more than 0.8 M $Na_2CO_3$ concentration if there is no other oxide forming agent.

• Korean Security Journal
• /
• no.1
• /
• pp.1-16
• /
• 1997

Nowdays the prison is the only correctional for juvenile delinquents not to be the second offenders in Korea. Originally the correctional education aims to let criminals go back to the society as a decent citizen after correcting them and prevent them from comminitting crimes repeatedly. Being considered to increase the second offenders in juvenile delinquency, the purpose of this study is to investigate the actual condition and problems of juvenile correctional education in Korea and to find out the solution of problems. First of all, this study examines the actual condition of the juvenile delinquency in Korea. The number of juvenile crimes has been increased from 1985 to 1995. In 1997, the current education in correctinal institutions for juvenile delinquents is inferior to that of developed countries. On the basis of this investigation, improvement plans which will be fit for the circumstances in Korea are suggested. The conclusion of this study are summarized as follows 1. Correctional institutions will be improved to accommodate the proper number of convicts. 2. Correctional officers should be qualified proffessinals who can achieve the aim of correctional education successfully. 3. In order to cultivate he social adaptability of convicts, the expansion of open prison is needed. 4. It is neccessary to classify convicts by means of moderized and scientific methods. 5. Correctinal education consist of various practical courses on jobs, After complenting these vocatinal training, the convict can obtain certificates. 6. The government has to has to plan policies that the released convicts can get jobs for living. 7. Owing to keeping prisons sanitary, it is very helpful for convicts to have thebelief that they are not abandoned by the member of their society. 8. Convicts are given opportunities to participate religious activities by their free-will. If above improvement plans are sufficiently accomplished, correctinal education will obtain good results, It is also effective to minimize the repetition of offence by ex-convicts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.537-537
• /
• 2013

Cyclotron-accelerated ion beams are used for various researches, such as nuclear physics, nuclear chemistry, biotechnology, and material sciences including radio-isotope production. Recently considerable applications are asked to the cyclotron development undertaken to meet user requirements of various ions'energies, intensities, and their pulsed beams. For instance, a cocktail beam acceleration technique rapidly changing the ion species and energies was developed to irradiating integrated circuit chips. Also a chopping system in a cyclotron injection line is considered for producing a pulsed ion beam with a relatively long period compared with that generated by the resonance frequency. For the research in neutron time-of-flight measurement, a single-pulsed beam with a repetition interval of the order of mili-seconds or longer is necessary to have a good resolution and to remove background events. In this paper a feasibility of pulsed beam with an external ion source is simulated by adopting a combination system of a chopper accompanying with a bunching stage in the injection line and an additional chopper after the exit of the cyclotron in order to produce beam pulses with a range of $1{\mu}s{\sim}1ms$ periods from a resonance RF cycle. The pulseperiod will be adjusted by chopping the number of beam bunches from the injected pulses in the injection line. However, the longer pulses will have reduced number of beam pulses and sacrificed beam currents. Because the beam users need an intense single pulsed beam, a careful tuning of the acceleration phase and a high-intense external ion source are necessary to achieve an intense single-pulsed beam from the cyclotron. It is essential to strictly match the acceleration phase of injected beams in the central region of the cyclotron to improve its efficiency. An effect of space charge at each pulse from the ion source will be also considered.

• Journal of Korean Elementary Science Education
• /
• v.24 no.3
• /
• pp.214-225
• /
• 2005

The purpose of this study was to examine the content relevance of the 7th national primary science curriculum and textbooks. To fulfill the purpose of the study, we 1) analyzed the 7th national science curriculum of Korea, Californian science standards, the national science curriculum of England and Japan, and current Korean and Japanese science textbooks, 2) conducted a nationwide survey to gather opinions from students, teachers, and professors of teachers colleges about the relevance of the science curriculum and textbooks. Main findings of this study are as follows: First, the science contents at each grade level should be determined by the students' characteristics, not by an equal portion rule among physics, chemistry, biology and earth science. Second, the excessive overlapping and repetition of contents due to the spiral curriculum should be avoid. Third, the number of topics at each grade level should be reduced, and the similar topics and themes should be integrated for students' deeper understanding. Fourth, the number of science concepts and activities should be reduced to an appropriate level considering the time allotment for science classes, teachers workload, laboratory conditions, etc. Fifth, differentiated curriculum, such as in-depth and supplementary course, should be described not in science contents, but in teaching and learning strategy.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.179-184
• /
• 2007

This study introduces the characteristics and some applications of repetitive polypeptides, especially to the biomaterial, tissue engineering scaffolds, drug delivery system, and DNA separation systems. Since some fibrous proteins, which consist of repeating peptide monomers, have been reported that their physical properties are changed dramatically by means of temperature alteration or pH shifting. For that reason, fibrous protein-mimetic polypeptides, which are produced by the recombinant technology, can be applied to the diverse biological fields. Repetitive polypeptides can also be used in the bioseparation area such as DNA sequencing, because they make DNA separation possible in free-solution electrophoresis by conjugating DNA fragments to them. Moreover, artificial synthesis of repetitive polypeptides helps to demonstrate the correlations between mechanical properties and structures of natural protein polymer, which have been proven that repetitive domains are affected by the sequence of the repeating domains and the number of repeating subunits. Repetitive polypeptides can be biologically synthesized using some special cloning methods, which are represented here. Recursive directional ligation (RDL) and controlled cloning method (CCM) have been proposed as excellent cloning methods in that we can control the number of repetition in the multimerization of polypeptides and the components of repetitive polypeptides by either method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.4
• /
• pp.99-105
• /
• 2011

This paper presents a method to design a centralized repetitive controller that is robust to variations in the multiple system parameters. The uncertain parameters are specified probabilistically by their probability distribution functions. Instead of working with the distribution functions directly, the centralized repetitive controller is designed from a set of models that are generated from the specified probability functions. With this multiple-model design approach, any number of uncertain parameters that follow any type of distribution functions can be treated. Furthermore, the controller is derived by minimizing a frequency-domain based cost function that produces monotonic convergence of the tracking error as a function of repetition number. Numerical illustrations show how the proposed multiple-model design method produces a repetitive controller that is significantly more robust than an optimal repetitive controller designed from a single nominal model of the multiple system.

• Journal of Advanced Navigation Technology
• /
• v.23 no.3
• /
• pp.251-257
• /
• 2019

The configuration of ultra-long optical transmission link with dispersion management and optical phase conjugation is proposed. The whole transmission link consist of 80 km (single mode fiber span) ${\times}$ 56 fiber spans. The artificial distribution of single mode fibers' lengths and residual dispersions in fiber spans, which are gradually increased/decreased as the span number is increased, is adopted to compensate for the distorted wavelength division multiplexed channels. Since the compensation effect through the artificial distribution in the previous researches is expected to decrease as the number of fiber spans are increased, three-time repetition of the artificial distribution patterns at intervals of 9 fiber spans applied into the link with dispersion management and optical phase conjugation is proposed. From the simulation results, it is confirmed that the compensation in the link configured by the special distribution pattern among 4 proposed patterns is slightly improved than the link configured by the conventional method, which is designed by the repeat-less distribution pattern.