• Journal of Korean Society on Water Environment
• /
• v.29 no.6
• /
• pp.790-798
• /
• 2013

Benthic macroinvertebrates are widely used as biological indicators for assessing the integrity of aquatic ecosystem. However, sampling has usually been done with fixed sample size due to time consuming and costly process. This study was conducted to find out the influence of sample size on the biological indices (H' DI, R1, J, EPT, ESB and BMI) of benthic macroinvertebrates. The 15 replicate samples were quantitatively collected from each 3 different site of two mountain streams in May, 2011. With the replicate data, we combined the abundance of each species with all the possible combinations of the sample size. Along with the increase of sample size, the number of species increased continuously and did not converge. BMI showed little difference whereas other biological indices increased or decreased.

• Korean Journal of Veterinary Research
• /
• v.48 no.4
• /
• pp.457-462
• /
• 2008

The objective of this study was to determine appropriate sample size that simulated different assumptions for diagnostic test characteristics and true prevalences when designing serological surveillance plan for pullorum disease and fowl typhoid in domestic poultry production. The number of flocks and total number of chickens to be sampled was obtained to provide 95% confidence of detecting at least one infected flock, taking imperfect diagnostic tests into account. Due to lack of reliable data, within infected flock prevalence (WFP) was assumed to follow minimum 1%, most likely 5% and maximum 9% and true flock prevalence of 0.1%, 0.5% and 1% in order. Sensitivity were modeled using the Pert distribution: minimum 75%, most likely 80% and maximum 90% for plate agglutination test and 80%, 85%, and 90% for ELISA test. Similarly, the specificity was modeled 85%, 90%, 95% for plate agglutination test and 90%, 95%, 99% for ELISA test. In accordance with the current regulation, flock-level test characteristics calculated assuming that 30 samples are taken from per flock. The model showed that the current 112,000 annual number of testing plan which is based on random selection of flocks is far beyond the sample size estimated in this study. The sample size was further reduced with increased sensitivity and specificity of the test and decreased WFP. The effect of increasing samples per flock on total sample size to be sampled and optimal combination of sensitivity and specificity of the test for the purpose of the surveillance is discussed regarding cost.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.3
• /
• pp.333-343
• /
• 1998

This paper proposes variable stream and sample size(VSSS) group control charts in which both the number of streams selected for sampling and sample size from each of the selected streams are allowed to vary based on the values of the preceding sample statistics. The proposed charts select a small portion of streams and take samples of size n = 1 if both the largest and smallest of sample means fall between the lower and upper threshold limits, and select a large portion of streams and take samples of size n > 1 otherwise. A Markov chain approach is used to derive the formulas for evaluating the performances of the proposed charts. Numerical comparisons are made between the VSSS and fixed stream and sample size(FSSS) group control charts.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.1
• /
• pp.80-89
• /
• 2021

In Korea, marine fish landed at ports are randomly sampled on a periodic basis (e.g., daily or weekly), and body sizes (e.g., lengths and weights) of those sampled fish are measured. The motivation for our study is whether or not such measurements reflect the size distribution, especially the length distribution of fish landed (= a population), because such length measurements are key data for a length-based assessment model. The current sampling method is to sample fish landed at ports by body size group (e.g., very small, small, medium, large, very large), using the sampling weights as the number of boxes by body size group. In this study, we showed that length composition data about fish sampled by the current method did not represent the length frequency distribution of the fish landed, and suggested that an alternative sampling method should be applied of using the sampling weights as the number of fish landed by body size group. We also introduced a method for determining an appropriate sample size.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.430-434
• /
• 1998

Preparative HPLC (High-Performance Liquid Chromatography) is mainly used for separating useful component from biological samples. By reversed-phase HPLC packed with preparative packings ($15{\mu}m$), the adsorption characteristics with sample size were investigated. Sample was 5'-GMP, a flavor enhancer, and the composition of mobile phase was 20mM $KH_2PO_4$ solution:methanol (97:3 vol.%). From the experimental results, the effect of sample size on retention factor was negligible, but the peak was asymmetrical above $1{\mu}g$ of sample. In addition, the increase in sample size deteriorated the number of theoretical plates, and at small concentration, the number of theoretical plates was less because of large peak width. In the experimental condition, the adsorption isotherm of 5'-GMP was relatively well represented by Freundlich equation.

• Clinics in Shoulder and Elbow
• /
• v.16 no.1
• /
• pp.53-57
• /
• 2013

Purpose: This review aims to explain the definition and basic principle of statistical analysis and to clarify statistical issues related to the sample size calculation. Materials and Methods: Many formulas are available that can be applied for different types of data and study design. Results: The sample size is the number of patients or other experimental units that need to be calculated prior to the study. Determining the appropriate sample size is required to answer the research question. Conclusion: Caution is needed when applying formula for the calculation of the sample size, as it is sensitive to error and even small differences in selected parameters can lead to large differences in the sample size.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.113-122
• /
• 1998

The requisite numbers of sample replicates for the population study of soft-bottom benthos were estimated from survey data on the Songdo tidal flat and subtidal zone in Youngil Bay, Korea. Large numbers of samples were taken; two-hundred-fifty 0.02 m$^2$ box corers and fifty 0.1m$^2$ van Veen grabs were taken on the Songdo tidal flat and in Youngil Bay, respectively. The effect of sampler size on sampling efforts was investigated by pooling the unit samples in pairs, fours, eights, etc. The requisite number of sample replicates (n$_r$) was determined by sample variance (s$^2$) and mean (m) function (n$_r$:s$^2$/P$^2$m$^2$), at P=0.2 level, in which s$^2$ and m were calculated from the counts of individuals collected. For example, seven samples of 0.02 m$^2$ corer for the intertidal and two samples of 0.1 m$^2$ van Veen grab for subtidal fauna were required to estimate the total density of community. The smaller sampler size was more efficient than larger ones when sampling costs were compared on the basis of the total sampling area. The requisite number of sample replicates was also predicted ($\^{n}$n$_r$) by substituting $\^{s}$$^2$ obtained from the regression of s$^2$ against m using the Taylor's power law ($\^{s}$$^2$:am$^b$). The regression line of survey data on s$^2$ and m plotted on log scale was well fitted to the Taylor's power law (r$^2$${\geq}$0.95, p<;0.001) over the whole range of m. The exponent b was, however, varied when it was estimated from m which was categorized into classes by its scale. The fitted exponent b was large when both density class and the sampler size were large. The number of sample replicates, therefore, could be more significantly estimated, if regression coefficients (a and b) would be calculated from sample variance and mean categorized into density classes.

• Journal of the Korean Statistical Society
• /
• v.3 no.1
• /
• pp.3-12
• /
• 1974

The two-stage sequential test, suggested by Baker [2] for testing hypotheses $H_0:\mu=\mu_0$ and $H_1:\mu=\mu_1$ of $N(\mu,\sigma^2)$ with the unknown $\sigma^2$ would not be amenable for applications unles some cluses on the choice of the first-stage sample size are available. The study in this paper is intended to shed some light on the size of the first-stage sample. An approximate method is used to estimate an optimal initial sample size that minimizes the average sample number. In brief, the optimal size is a strictly monotone decreasing function of the quantity $(\mu_1-\mu_0)/\sigma$. Empirical and simulation results are used to ascertain the negligible effect of possible errors due to approximations and assumptions used.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.4 no.5
• /
• pp.11-14
• /
• 1981

This study intends to decide the economic sample size based on the cost of sampling Inspection for destructive testing. The marginal percent defective is used as the lot tolerance percent defective (LTPD), and the Newton's iterative method is adopted to calculate the optimum sample size(n), given by the consumer's risk($\beta$ - risk) and the acceptance number(c).

• Genomics & Informatics
• /
• v.4 no.2
• /
• pp.51-56
• /
• 2006

In planning a genetic association study, it is necessary to determine the number of samples to be collected for the study in order to achieve sufficient power to detect the hypothesized effect. The case-control design is increasingly used for genetic association studies due to the simplicity of its design. We review the methods for the sample size and power calculations in case-control genetic association studies between a marker locus and a disease phenotype.