• Journal of Forest and Environmental Science
• /
• v.35 no.3
• /
• pp.189-196
• /
• 2019

Plants are consumed by a myriad of organisms that compete for resources. Direct interactions among multiple plant-feeding organisms in a single host can range for each species from positive to negative. Wood-boring beetle faces a number of biotic and abiotic constraints that interfere with the good prospects from the tree. Biotic factors, including arthropod pests and diseases, and abiotic factors, such as drought and water-logging, are the major constraints affecting the species. The present study aimed to provide basic data for analyzing forest health, identify the kinds of wood-boring beetles in the central part of Korea. Our second goal was to analyze the species composition and diversity of regional communities and to examine. A total of 10,461 individual wood-boring beetles belonging to 8 families and 50 species attracted to trap trees in the pine forests were recorded during the study period on study sites. The results of the analysis of collected species showed that the community structure on all study sites was similar. Seasonal occurrences of dominant wood-boring beetles (5 species) from each study site showed the highest number of all species, except for Siphalinus gigas in May, followed by a gradual decline, and the largest number of Siphalinus gigas appeared in June. The similarity index of species composition was relatively high, ranging from 0.75 to 0.90 for each study site.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.49-54
• /
• 2020

The purpose of this study is to investigate the effects of the change in the spindle speed and the feed rate on the diameter change of a hole using a boring cutter for the internal boring process of AL6061-T4 alloys. The experimental results are quantitatively analyzed by applying the factor analysis and the response surface analysis of the experimental design method. The tendency of the diameter change according to the change in the spindle speed and feed level is also evaluated. During the internal boring process of AL6061-T4 alloys, the main factor affecting the diameter change is the spindle speed in which the diameter decreases as the number of revolutions increases. In addition, the diameter tends to increase as the feed is increased; however, as the number of spindle revolutions increases, the influence of the feed decreases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.97-105
• /
• 2004

As modern society has been progressed, the demolition method of concrete structure that satisfy the condition of safety, economic efficiency, and environment-friendliness is required. This study investigated problems of existing demolition methods and developed modified method minimizing cooling water and sludge for demolition job. It was also verified the validity of this method based on the finite element methods. A analysis parameters as a number, depth and size of boring, and self weight were introduced for this study, and gave optimal condition for the demolition job and analysis.

• Korean journal of applied entomology
• /
• v.5_6
• /
• pp.59-63
• /
• 1968

This Paper deals With the biology and the life Cycle of Eriophyes kuko KISHIDA. 1. The host of Eriophyes kuko KISHIDA is Lycium chinense MILL (Boxthorn), Solanum nigrum LINNE(Morel) and Capacium annum LINNE(Red pepper) etc. 2. Eriophyes kuko KISHIDA is migrated and propagated by physical carriers. The direction of the wind has a great influence upon migration and dispersal. 3. The number of e99s deposited by a adult female is $28.5\pm0.449$ egg period is $7.0\pm0.447$ and larval period is $4.33\pm0.667$ days respectively. 4. The size of gall diameter on the leaf of Lycium Chinense MILL after boring in each date by Eriophyes kuke KISHIDA is as follows, 1st day after boring is $290.5\pm0.3415\mu$ End 25st day after boring is $3260.5\pm0.5157\mu$ in average. 5. Adult periods are from 25 to 30 days and the egg laying period is 6 days. 6. Eriophyes kuko KISHIDA has 6 to 7 generations in a year, and hibernate they over winter in the gall as an adult. The first adult appears in late May.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.700-707
• /
• 2008

As plan connecting island to island or island to land is needed, a lot of long-span bridge is being designed lately in Southern part of Korea. With development of pile equipment, overhanging large-scaled concrete pile are adopted to foundation type of main tower or pylon. About the number of 15~30 group piles per tower foundation is designed to resist long-spaning super-structure load, but by restricted condition of site investigation cost, a few boring-hole tests are performed to identify sub-ground layers. Up to now, direct-curved method connecting two or three known boring logs and representative interval method are usually used to evaluate unknown depth and rock properties at locations where piles are constructed. Because this approach is not logical and so rough, much difference occurs between designed length of piles and real length of it. In this paper, using a lot of various prediction method(reciprocal distance method, inverse square distance method and kriging method etc.), we suggest optimum length of group piles.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.558-564
• /
• 2011

This study was conducted to evaluate the effects of early revegetation by analyzing the characteristics of germination and growth of Lespedeza cyrtobotrya using boring technique in rock slopes. After making up a growing basis of approximately 20 cm depth and 10 cm diameter by using a boring machine, the surface of rock slopes was planted with vegetation-plant. The number of germinating populations by soil media was 23 in H.s, 22 in T.s, 12 in M.s, and 1 in M.g.s. The germination rate (%) by soil media was 19.2% in H.s, 18.3% in T.s, 10.0% in M.s and 0.8% in M.g.s. In monthly changes of growth rate, the aspect was northwest direction, the soil media was M.s, and the treatment was microorganism plot. The main factors affecting survivorship and growth of population were soil media and treatment plot. The interaction between each factor had a good effects in bearing ${\times}$ soil media, bearing ${\times}$ treatment plot, soil media ${\times}$ treatment plot. but, it is recommended that the mulching of vegetation plant is highly needed to help the germination of seed and growth of vegetation because of loss of seed and soil media occurred due to rainfall. Therefore, The result suggests that the revegetation technique using boring in rock slope was very efficient in respect of the early revegetation and the landscape.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.47-58
• /
• 2020

The interest in the use of shield TBM (Tunnel Boring Machine) on the tunnel excavation has been increased rapidly in Korea. The shield TBM tunnel is generally designed as non-drainage tunnel. Consequently, if water leakage through the segment joints happens, big problems on the usage and stability of tunnel can be occurred. In this study, the variation of waterproof capacity of hydrophilic rubber waterstop by the construction error and excessive displacement of segment was studied. In particular, the waterproof capacity of each of single and double layer arrangements of hydrophilic rubber waterstop was examined to verify the efficiency of the double layer arrangement. The test results show that the single layer and double layer hydrophilic rubber waterstop showed the same waterproof performance. hydrophilic rubber waterstop has favorable on the offset, however unfavorable on the gap.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.18-23
• /
• 1996

The Job of Milling in the Local Skill Contest in 1996 was to assemble parts into a complete whole of the parts number 1, 3, 4 worded by Milling Machine and the parts number 2 worked by Machining Center. In the parts of Milling Machine, the Job was to work 45$^{\circ}$angle working, T-slot, dovetail, the correct position drilling, rimming, boring, etc. In the Machining Center, there were the way of calculation of point of contact of 'R' contour curved line and lots of working elements. So, it was possible to work the parts and assemble them within the time limit only through the program to be made out in the way to shorten working hours.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.323-328
• /
• 2007

Geotechnical Information Database Project was began by Ministry of Construction Transport at the 1999, because many people need a sharing and reusing the geotechnical report in construction process. In the beginning, target was report of national highway construction. the whole of country has been target on since the 2005. Today, the 60,581 number of geotechnical data(counted by boring number) is maintained. In this study, Geotechnical Information Distribute System(GIDS) was developed, in order to improve practical use and to be connected to National Geographic Information Center(NGIC). and program to be applicable to construction was suggested. We expect that GIDS make a effect to improve geotechnical data application and to be use in all part of construction process.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.81-89
• /
• 2010

This study was conducted to evaluate the effects of early revegetation by analyzing the characteristics of germination and growth of Chrysanthemum zawadskii using vegetation-plant in rock slopes. After making up a growing basis of approximately 20-cm depth and 10-cm diameter by using a boring machine, the surface of rock slopes was planted with vegetation-plant. The number of germinating populations by soil media was 41 in H.s, 4 in T.s, 3 in M.s, and 0 in M.g.s. The germination rate (%) by soil media was 20.0% in H.s, 3.3% in T.s, 2.5% in M.s and 0% in M.g.s. In monthly changes of growth rate, the aspect was northwest direction, the soil media was H.s, and the treatment was microorganism plot. The main factors affecting survivorship and growth of population were soil media and treatment plot. The interaction between each factor had a good effects in bearing x treatment plot, soil media x treatment plot. but, it is recommended that the mulching of vegetation plant is highly needed to help the germination of seed and growth of vegetation because of loss of seed and soil media occurred due to rainfall. Therefore, The result suggests that the revegetation technique using boring in rock slope was very efficient in respect of the early revegetation and the landscape.