• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.347-353
• /
• 2019

The composition of the reduced fuel produced in the electrolytic reduction process of pyroprocessing affects the concentration change of $UCl_3$, an important operating variable of the electrorefining process. In this study, we examined the concentration change of $UCl_3$ in the electrorefiner according to the content of TRU and RE elements in the reduced fuel and the concentration of $Li_2O$ introduced in the electrorefiner accompanied with the reduced fuel. Considering only the TRU and RE elements, the concentration of $UCl_3$ decreased with increasing the number of electrorefining operation batch. In order to operate one campaign (20 batches) of electrorefining process, it was found that additional injection of $UCl_3$ should be conducted more than 3 times. On the other hand, the concentration of $UCl_3$ in the electrorefiner changed significantly depending on the concentration of $Li_2O$ and, accordingly the number of operable electrorefining batches decreased rapidly, showing that the concentration of $Li_2O$ is an important operating variable in electrorefining. Therefore, the results of this study show that to maintain the concentration of $UCl_3$ in the electrorefiner, the operation mode should be set by taking into account the effect of $Li_2O$ as well as the TRU and RE elements contained in the reduced fuel.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.4
• /
• pp.33-49
• /
• 2010

Objectives : This study was designed to elucidate the anti-pathogenetic and curative effects of Gyehyeoldeungbokhap-bang(Jixietengfuge-fang, GCP) on Type II collagen-induced arthritis(CIA) in mice. Methods : In experiment, twenty four mices were divided into non-treated normal group(n=6), bovine type II collagen-induced control group(n=6), collagen immunized and treated two group medicated with extract of GCP(concentration of extraction: 200 mg/kg n=6, 400 mg/kg n=6) for 4 weeks after collagen immunization, Various experimental such as arthritis, incidence, index, total cell number of spleen, total cell number of peripheral lymph node(PLN), paw joint total cell number, analysis on the percentage of immunofluorescent cells of spleen in CIA induced mice, effects of inflammatory gene expression in spleen, PLN and paw joint of CIA mice, production of cytokine(IFN-${\gamma}$, IL-4, TNF-${\alpha}$, IL-6), analysis of rheumatoid factor(anti-collagen lgG, lgM level in serum) and histopathological study on the paw joint. The arthritis index, incidence were measured a week over 4 weeks after second boosting. Total cell number of spleen, peripheral lymph node, paw joint were measure after performed experiment over 7 weeks. Concentration of cytokine and rheumatoid factor in serum were measured after experiment finished. Histopathological study on the paw joint was measured after 40 days medicated with extract of GCP. Results : 1. Incidence of arthritis and index of arthritis were significantly decreased in treated group with 400 mg/kg. 2. Total cell number of spleen, PLN and paw joint were significantly decreased in treated group. 3. Analysis on the percentage of immunofluorescent cells of spleen in CIA induced mice were significantly controled compare with control group. 4. Effects of inflammatory gene expression in spleen, PLN and paw joint of CIA induced mice were significantly controled compare with control group. 5. IFN-${\gamma}$, IL-6, TNF-${\alpha}$, concentration($pg/m{\ell}$) in serum of treated group was significantly decreased compare with control group. But IL-4 was significantly increased. 6. lgM and lgG concentration($pg/m{\ell}$) in serum of treated group was significantly decreased compare with control group. 7. Histopathologically, suppurative and destructive lesion of synovial membrane, articular cartilage and subchondral bony tissue in treated group were alleviated compare with those of control group. Conclusions : Based on the results described above, it might be consider that Gyehyeoldeungbokhap-bang(Jixietengfuge-fang, GCP) has antiarthritic and analgesic effects and also inhibitory effects on the progression of collagen-induced arthritis mice.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.4 s.36
• /
• pp.262-273
• /
• 1990

The purpose of this study is to investigate the softening effect of cellulase-treated cotton fabric and the damage on the fabric which is accompanied by the treatemnt. Cotton fabric is treated with cellulase under various concentrations and time, and the weight loss, hand values (by KES), surface characteristics, moisture regain, tensile strength, copper number and intrinsic viscosity of the treated samples and untreated samples have been compared. The results are as follows: 1. The weight loss of cotton fabric increased as the concentration of cellulase and the treating time increased. 2. The enzyme treatment had little effect on the stiffness of the treated samples but anti- drape stiffness decreased for the treated samples. Fullness and softness of the treated samples increased and crispness decreased with the lowest level reaching after two hours of the treatment for all concentrations. Scrooping feeling of the treated samples increased and flexibility with soft feeling increased as the treating time and the concentration of cellulase increased. 3. Moisture regain of the samples decreased as the treating time and the concentration of the enzyme increased and the treated fabric showed cracks on the fiber surface, and much surface fibers on the fabric have been removed after the treatment. 4. Tensile strength of the samples decreased as the treating time and as the concentration of cellulase increased, and the copper number increased while the intrinsic viscosity decreased as the treating time increased, but cellulase concentration had a little effect.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.811-814
• /
• 2000

Effects of kanamycin concentration on regeneration and rooting of transgenic 'McIntosh Wijcik' were investigated to establish the efficient Agrobacterium-mediated transformation system. Relatively high regeneration frequency of explants appeared even at the high concentration of $150mg{\cdot}L^{-1}$ kanamycin, but the regeneration frequency and the number of normal shoots decreased significantly at a concentration of higher than $100mg{\cdot}L^{-1}$ kanamycin in the gelrite-gellifying medium. Rooting response varied with the transgenic lines in the agar-solidifying medium supplemented with the different concentrations of kanamycin and they were grouped with the inhibition level at $30mg{\cdot}L^{-1}$ concentration. No correlation between copy number and root response was observed. The optimum concentrations of kanamycin for the regeneration of 'McIntosh Wijcik' apple in the medium gellified with gelrite and for indirect-selection of putative transformants in the rooting medium solidified with agar were found to be $100mg{\cdot}L^{-1}$ and $30mg{\cdot}L^{-1}$ respectively.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.365-370
• /
• 2014

For real-time monitoring of colloidal nanoparticles (NPs) in aqueous media, a light sheet type dark-field microscopy system combined with a microfluidic concentration gradient generator (${\mu}FCGG$-LSDFM) was developed. Various concentrations of colloidal Au NPs were simultaneously generated with the iFCGG and characterized with the LSDFM setup. The number concentrations and hydrodynamic size distributions were measured via particle counting and tracking analysis (PCA and PTA, respectively) approaches. For the 30 nm Au NPs used in this study, the lower detection limit of the LSDFM setup was 3.6 ng/mL, which is about 400 times better than that of optical density measurements under the same ${\mu}FCGG$ system. Additionally, the hydrodynamic diameter distribution of Au NPs was estimated as $39.7{\pm}12.2nm$ with the PTA approach, which agrees well with DLS measurement as well as the manufacturer's specification. We propose this ${\mu}FCGG$-LSDFM setup with features of automatic generation of NP concentration gradient and real-time monitoring of their physicochemical characteristics (e.g., number concentration, and hydrodynamic size distribution) as an important component of future high-throughput screening or high-content analysis platforms of nanotoxicity.

• Advances in Energy Research
• /
• v.5 no.3
• /
• pp.227-237
• /
• 2017

The continuous increase of emission rates of green house gases and the effects on global warming added a new dimension to the problem of substituting the petroleum and its derivatives by environment friendly and sustainable energy sources for the world. Solar and wind energy appear at the top of the list of renewable of high potential, widely available, of dominated technology and well accepted. Brazil is one of the few countries in the world that receives number hours of sunshine exceeding 3,000 hours per year with a daily average of 4.5 to 6 kWh. However, this potential is largely unexplored and poorly tapped. The number of renewable systems implanted in Brazil has grown in recent years, but still insignificant when compared, for example, with Germany and Spain among others. This paper presents the results of an optical study on small concentration solar collector with evacuated tube enveloping the absorber and internal reflective surface fixed on the bottom part of the evacuated tube. The designed collector has a 2D geometrical concentration ratio between 2.455 and 4.91. The orientation of the solar collector, the ratio of the radius of the receiver to the radius of the absorber, the incidence angle for each period of the year, the collector inclination angle, the aperture angle of the reflective surface, concentration and optical efficiency were determined. The ray traces and flux distribution on the absorber of the evacuated tube solar collector were determined by using the program Ray Optics Simulation. The optical efficiency varies during the year according to the solar declination. For the periods were the solar declination is close to zero the efficiencies are maximum, and the variation during the day is around 25.88% and 99.9%. For the periods were the solar declination is maximum the efficiencies are minimum, and the variation during the day is around 23.78% and 91.79%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1053-1060
• /
• 2011

This study is performed to determine the drug concentration profiles of drug-eluting stents (DES) for an ideal circular ring stent and intertwined stent models for various Reynolds numbers (Re = 200, 400, and 800). The Navier.Stokes equations coupled with the advection-diffusion equation are solved numerically in order to determine how the flow patterns and drug deposition are affected in the in-stent and post-stent regions where flow separation and recirculation occur. The presence of DES within the arterial segment affects the local drug distribution in the flow field. As a result, the drug concentration for the intertwined stent is higher over the in-stent region in comparison with the ideal stents. For a given stent geometry, the local drug concentration in the in-stent region decreases with Reynolds number, while for a given Reynolds number, the local drug concentration is relatively insensitive to the stent geometry. The results show that drug concentration along the arterial wall is significantly higher within the in-stent and post-stent regions for the intertwined stent geometry than for the ideal stent geometries.

• Journal of Surface Science and Engineering
• /
• v.49 no.4
• /
• pp.331-338
• /
• 2016

In this work, anodic oxidation behavior of AZ31 Mg alloy was studied as a function of $Na_2CO_3$ concentration in electrolyte by voltage-time curves and observation of surface appearances and morphologies after the anodic treatments, using optical microscopy and confocal scanning laser microscopy (CSLM). The voltage-time curves of AZ31 Mg alloy surface and surface appearances after the anodic treatments showed three different regions with $Na_2CO_3$ concentration : region I, below 0.2 M $Na_2CO_3$ where shiny surface with a number of small size pits; region II, between 0.4 M and 0.6 M $Na_2CO_3$ where dark surface with relatively low number of large size burned or dark spots; region III, more than 0.8 M $Na_2CO_3$ where bright surface with or without large size dark spots were obtained. The anodically treated AZ31 Mg alloy surface became significantly brightened with increasing $Na_2CO_3$ concentration from 0.5 M to 0.8 M which was attribute to the formation of denser and smoother surface films. Pits and porous protruding reaction products were found at relatively large size and small size spots, respectively, on the AZ31 Mg alloy surface in low concentration of $Na_2CO_3$ less than 0.2 M. The formation of pits is attributed to the result of repetition of the formation and detachment of porous anodic reaction products. Based on the experimental results obtained in this work, it is concluded that more uniform, denser and smoother surface of AZ31 Mg alloy could be obtained at more than 0.8 M $Na_2CO_3$ concentration if there is no other oxide forming agent.

• Imaging Science in Dentistry
• /
• v.44 no.4
• /
• pp.279-285
• /
• 2014

Purpose: To assess the influence of anatomic location on the relationship between computed tomography (CT) number and X-ray attenuation in limited and medium field-of-view (FOV) scans. Materials and Methods: Tubes containing solutions with different concentrations of $K_2HPO_4$ were placed in the tooth sockets of a human head phantom. Cone-beam computed tomography (CBCT) scans were acquired, and CT numbers of the $K_2HPO_4$ solutions were measured. The relationship between CT number and $K_2HPO_4$ concentration was examined by linear regression analyses. Then, the variation in CT number according to anatomic location was examined. Results: The relationship between $K_2HPO_4$ concentration and CT number was strongly linear. The slopes of the linear regressions for the limited FOVs were almost 2-fold lower than those for the medium FOVs. The absolute CT number differed between imaging protocols and anatomic locations. Conclusion: There is a strong linear relationship between X-ray attenuation and CT number. The specific imaging protocol and anatomic location of the object strongly influence this relationship.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.4
• /
• pp.261-266
• /
• 2008

We established a model to calculate radioactive waste from sewage disposal tank of hospitals to optimize the number of patients receiving inpatient radioiodine therapy within the safety guideline in our country. According to this model and calculation of radioactivity concentration using the number of patients per week, the treatment dose of radioiodine, the capacity and the number of sewage tanks and the daily amount of water waste per patient, estimated concentration of radioactivity in sewage waste upon disposal from disposal tanks after longterm retention were within the safety guideline (30 Bq/L) in all the hospitals examined. In addition to the fact that we could increase the number of patients in two thirds of hospitals, we found that the daily amount of waste water was the most important variable to allow the increase of the number of patients within the safety margin of disposed radioactivity. We propose that saving the water amount be led to increase the number of patients and they allow two patients in an already furnished hospital inpatient room to meet the increasing need of inpatient radioiodine treatment for thyroid cancer.