Abstract
The composition of the reduced fuel produced in the electrolytic reduction process of pyroprocessing affects the concentration change of $UCl_3$, an important operating variable of the electrorefining process. In this study, we examined the concentration change of $UCl_3$ in the electrorefiner according to the content of TRU and RE elements in the reduced fuel and the concentration of $Li_2O$ introduced in the electrorefiner accompanied with the reduced fuel. Considering only the TRU and RE elements, the concentration of $UCl_3$ decreased with increasing the number of electrorefining operation batch. In order to operate one campaign (20 batches) of electrorefining process, it was found that additional injection of $UCl_3$ should be conducted more than 3 times. On the other hand, the concentration of $UCl_3$ in the electrorefiner changed significantly depending on the concentration of $Li_2O$ and, accordingly the number of operable electrorefining batches decreased rapidly, showing that the concentration of $Li_2O$ is an important operating variable in electrorefining. Therefore, the results of this study show that to maintain the concentration of $UCl_3$ in the electrorefiner, the operation mode should be set by taking into account the effect of $Li_2O$ as well as the TRU and RE elements contained in the reduced fuel.
파이로프로세싱의 전해환원공정에서 생산된 금속전환체의 조성은 전해정련공정 운전의 중요한 운전변수인 용융염 중 $UCl_3$의 농도변화에 영향을 미친다. 따라서, 본 연구에서는 금속전환체에 함유된 TRU와 RE 원소의 함량 및 금속전환체에 동반되어 전해정련 전해조에 유입될 수 있는 $Li_2O$ 농도가 전해정련 전해조의 $UCl_3$ 농도 변화에 미치는 영향을 검토하였다. 금속전환체의 TRU 원소와 RE 원소의 농도만을 고려하였을 때 전해정련 운전 batch 수 증가에 따라 $UCl_3$ 농도가 감소하였다. 전해정련 1 campaign(20 batch)를 운전하기 위해서는 $UCl_3$를 3회 이상 추가 보충해야 함을 알 수 있었다. 한편, 금속전환체에 동반되어 전해정련 전해조에 유입되는 $Li_2O$의 유입량 증가에 따라 $UCl_3$ 농도 감소의 영향이 크게 나타났으며, 이에 따라 운전 가능 batch 수가 급격히 감소하게 되어 전해정련 운전에 중요한 운전 변수임을 보여주었다. 이러한 결과는 전해정련 운전 중 $UCl_3$ 농도 유지를 위해 금속전환체에 포함된 TRU 및 RE 원소뿐만 아니라 금속전환체에 동반되어 유입될 가능성이 있는 $Li_2O$의 영향도 고려하여 전해정련 운전모드를 설정하여야 함을 보여주었다.