• Applied Microscopy
• /
• v.18 no.2
• /
• pp.21-33
• /
• 1988

The purpose of this study was to investigate the effect of chlorambucil on the mouse Leydig cell by electron microscopy. Chlorambucil suspended in the 0.5N sodium bicarbonate(pH 8.0) was injected I.P.(intraperitoneal) at a dosage of level 20mg/kg for 1 weeks, 3 weeks and 5 weeks, respectively. The results obtained from this experiment are as follows: 1. One week after the administration of chlorambucil, there was an increase in heterochromatin, swelling and cristae disruption in some mitochondria, mild vacuolation between cells and the occurrence of membrane bound inclusions in some nuclei. 2. After 3 weeks, smooth endoplasmic reticulum dilations, cytoplasmic vacuolation, mitochondrial swelling, inner mitochondrial cristae disruption, membranous whorls, and intranuclear inclusions were observed in the treated cells. 3. After 5 weeks of treatment, most mitochondria were swollen and their membranes were severely disrupted. Further, smooth endoplasmic reticulum dilations and vacuolation of the cytoplasm were apparent in the treated Leydig cells. In addition numerous membranous whorls and intranuclear inclusion bodies were present. The nuclei displayed invaginatons of the nuclear membrane and large clumps of heterochromatin. From these results it is concluded the longer the duration of chlorambucil administration, the greater the degeneration of the nucleus and cytoplasmic organelles.

• Korean Journal Plant Pathology
• /
• v.14 no.1
• /
• pp.74-82
• /
• 1998

Gladioli (Gladiolus hybridus) showing flower colour breaking, leaf mosaics, necrotic fleck, and dwarfing or lack of visible symptoms were collected from gladioli growing areas in Taegu and Kyungpook province, Korea. The two viruses isolated from the naturally infected gladioli were identified as ban yellow mosaic virus (BYMV) and clover yellow vein virus (CIYVV) by their host range, immunosorbent electron microscopy (ISEM), enzyme-linked immunosorbent assay (ELISA), direct tissue blotting immunoassay (DTBIA) and intracellural symptoms. In ultrathin sections of BYMV and CIYVV infected tissues, laminated aggregate-type inclusions, cytopalsmic bodies and nuclear inclusions as well as filamentous virus particles were observed in the cytoplasm of parenchyma cells. By DTBIA and ISEM, BYMV was detected in all tested gladiolus plants showing severe or mild mosaic symptoms, whereas CIYVV were mainly detected from those of mild mosaic symptoms. BYMV is the most prevalent in commercial gladioli and present major production problems. Detection sensitivity of BYMV and CIYVV in crude sap of infected gladiolus leaves by ISEM was about twice compared with ELISA. In a comparison of ELISA, ISEM, DTBIA, BYMV was detected in same degree by DTBIA in samples where sap extracts were positive in both ELISA and ISEM. DTBIA provides a specific, rapid, and simple tool for large-scale diagnosis of BYMV.

• Nuclear Engineering and Technology
• /
• v.40 no.3
• /
• pp.225-232
• /
• 2008

To understand the effect of the cyclic strain rate on the environmentally assisted cracking behaviors of SA508 Gr.1a low alloy steel in deoxygenated water at $310^{\circ}C$, the fatigue surface and a sectioned area of specimens were observed after low cycle fatigue tests. On the fatigue surface of the specimen tested at a strain rate of 0.008 %/s, unclear ductile striations and a blunt crack tip were observed. Therefore, metal dissolution could be the main cracking mechanism of the material at this strain rate. On the other hand, on the fatigue surfaces of the specimens tested at strain rates of 0.04 and 0.4 %/s, brittle cracks and flat facets, which are evidences of the hydrogen induced cracking, were observed. In addition, a tendency of linkage between the main crack and the micro-cracks was observed on the sectioned area. Therefore, at higher strain rates, the main cracking mechanism could be hydrogen induced cracking. Additionally, evidence of the dissolved MnS inclusions was observed on the fatigue surface from energy dispersive x-ray spectrometer analyses. Thus, despite the low sulfur content of the test material, the sulfides seem to contribute to environmentally assisted cracking of SA508 Gr.1a low alloy steel in deoxygenated water at $310^{\circ}C$.

• Korean Journal Plant Pathology
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1986

Negatively stained dip preparations from Euonymus showing vein clear symptoms revealed bacilliform particles. The particles tentatively referred to as the Euonymus vein clear virus(EVCV) have a relatively complex structure, measuring 230-280nm in length and 70-80nm in diameter. They have an envelope, 8-10nm thick, provided with evenly spaced beadlike projection about 5-6nm long. The inner tubular core which had no envelope showed helical structures, 200-220nm long, and 50-55nm in diameter. This inner tubular core is interpreted as the virus nucleocapsid. A striking association of virus particles with the nuclei of infected cells was apparent from sections which showed numberous virus particles at the nuclear periphery and in what appeared to be intranuclear virus particle inclusions. Careful examination of these apparent inclusions revealed the presence of the nuclear envelope surrounding them, in addition to cytoplasmic organelles within them. Such profiles were interpreted as having arisen when the sections passed through invaginations of the cytoplasm into the nucleus. In all the sections showing virus particles associated with the nucleus, large number of virus particles were found to be present in expanded areas between the two lamellae of the nuclear envelope. This location is suggested as a possible site of virus assembly. Serveal micrographs of particles found in this location suggested incorporation of the inner lamella of the nuclear envelope into the viral envelope. Various micrographs indicated a possible helical arrangement of certain components present in the virus core.

• The Korean Journal of Cytopathology
• /
• v.7 no.1
• /
• pp.23-30
• /
• 1996

Chromatin texture, which partly reflects nuclear organization, is evolving as an important parameter indicating cell activation or transformation. In this study, chromatin pattern was evaluated by image analysis of the electron micrographs of follicular and papillary carcinoma cells of the thyroid gland and tested for discrimination of the two neoplasms. Digital grey images were converted from the electron micrographs, nuclear images, excluding nucleolus and intranuclear cytoplasmic inclusions, were obtained by segmentation; grey levels were standardized; and grey level histograms were generated. The histograms in follicular carcinoma showed Gaussian or near-Gaussian distribution and had a single peak, whereas those in papillary carcinoma had two peaks(bimodal), one at the black zone and the other at the white zone. In papillary carcinoma, the peak in the black zone represented an increased amount of heterochromatin particles and that at the white zone represented decreased electron density of euchromatin or nuclear matrix. These results indicate that the nuclei of follicular and papillary carcinoma cells differ in their chromatin pattern and the difference may be due to decondensed chromatin and/or matrix substances.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.3
• /
• pp.339-352
• /
• 2021

Legacy waste from the decommissioned A-1 nuclear power plant in the Slovak Republic is scheduled for immobilisation within a tailored alkali borosilicate glass formulation, as part of ongoing site cleanup. The aqueous durability and characterisation of a simulant glass wasteform for Chrompik III legacy waste, was investigated, including dissolution experiments up to 112 days (90℃, ASTM Type 1 water). The wasteform was an amorphous, light green glassy product, with no observed phase separation or crystalline inclusions. Aqueous leach testing revealed a suitably durable product over the timescale investigated, comparing positively to other simulant nuclear waste glasses and vitreous products tested under similar conditions. Iron and titanium rich precipitates were observed to form at the surface of monolithic samples during leaching, with the formation of an alkali deficient alteration layer behind these at later ages. Overall this glass appears to perform well, and in line with expectations for this chemistry, although longer-term testing would be required to predict overall durability. This work will contribute to developing confidence in the disposability of vitrified Chrompik legacy wastes.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.34-41
• /
• 2024

This work presents experimental data and modelling of the release of Mo from high-burnup spent nuclear fuel (63 MWd/kgU) at two different pH values, 8.4 and 13.2 in air. The release of Mo from SF to the solution is around two orders of magnitude higher at pH = 13.2 than at pH = 8.4. The high Mo release at high pH would indicate that Mo would not be congruently released with uranium and would have an important contribution to the Instant Release Fraction, with a value of 5.3%. Parallel experiments with pure non irradiated Mo(s) and XPS determinations indicated that the faster dissolution at pH = 13.2 could be the consequence of the higher releases from metallic Mo in the fuel through a surface complexation mechanism promoted by the OH^- and the oxidation of the metal to Mo(VI) via the formation of intermediate Mo(IV) and Mo(V) species.

• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.526-538
• /
• 2001

Fatigue tests in air and in room temperature water were performed to obtain comparable data and stable crack measuring conditions. In air environment, fatigue crack growth rate was increased with increasing temperature due to an increase in crack tip oxidation rate. In room temperature water, the fatigue crack growth rate was faster than in air and crack path varied on loading conditions. In simulated light water reactor (LWR) conditions, there was little environmental effect on the fatigue crack growth rate (FCGR) at low dissolved oxygen or at high loading frequency conditions. While the FCGR was enhanced at high oxygen condition, and the enhancement of crack growth rate increased as loading frequency decreased to a critical value. In fractography, environmentally assisted cracks, such as semi-cleavage and secondary intergranular crack, were found near sulfide inclusions only at high dissolved oxygen and low loading frequency condition. The high crack growth rate was related to environmentally assisted crack. These results indicated that environmentally assisted crack could be formed by the Electrochemical effect in specific loading condition.

• Explosives and Blasting
• /
• v.17 no.4
• /
• pp.18-31
• /
• 1999

The explosive forming has been used for many year to expand tubes into tubesheets. this process has demonstrated ability to direct carefully the energy of an explosive to expand tubes into tubesheet holes without damaging the tubesheet and without causing the excessive cold work at the tube I.D. that is normally associated with mechanical expansion. The success of explosive tube expansion provided the background for the development of the explosive tube plug. The main results are as follows : (1) The optimum explosives and explosive qualities are PETN, RDX, HMS and about 18~31gr/ft of explosive plugging in nuclear steam generator. (2) Explosive plugging's thickness is 0.9~1.8mm. If groove of 0.4 mm formed in plug outside, For the hydraulic leakage is go up, explosive plugging of formed groove are applicate tube and tubrplate. (3) Sheath is designed on the polyethylene of low density, In thermal impact test of the $430^\circ{C}$, hydraulic leakage is $300kg/cm^2$. (4) About 10~60mm oxide inclusions are existed on the space of explosive plug and tube protect to the leakage.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1365-1372
• /
• 2019

The effects of Y and Ti on the microstructure stability and tensile properties of the reduced activation ferritic/martensitic steel have been investigated. The addition of Y and Ti affected the prior austenite grain size due to the pinning of the inclusions. Ti addition of 0.008 wt% to the steel was intended to promote the precipitation of nano-sized carbides with a high resistance to coarsening. 8Ti14Y exhibited a higher yield strength and a lower DBTT than the other alloys due to the fine grain size and additional precipitation hardening by (Ti, Ta)-rich MX. After thermal exposure at $550^{\circ}C$ for 1500 h, yield strength was dropped significantly in exposed 0Ti13Y. On the contrary, a lower reduction of YS was observed in 8Ti14Y. The $M_{23}C_6$ in 0Ti13Y and 8Ti14Y and MX in 25Ti14Y and 39Ti15Y coarsened seriously during ageing, which could be responsible for the reduction of the tensile properties of alloys.