• 접착 및 계면
• /
• 제14권3호
• /
• pp.111-116
• /
• 2013

본 연구에서는 신발에 사용되는 고무부품의 접착에 있어서 버핑 및 용매 세척 등의 표면처리 공정을 대체하기 위하여, 플라즈마 처리를 통한 표면 및 접착특성을 알아보았다. 플라즈마 처리 시 분사노즐과 고무 시편과의 거리가 감소할수록 접촉각은 감소하였으며, 플라즈마 처리속도가 증가함에따라 접촉각은 증가하였다. 고무 시편의 표면조도 측정결과 플라즈마 처리 후 Ra 값은 20%, Rz 값은 16%가 증가하는 결과를 나타내었다. 플라즈마 발생 노즐과 고무시편과의 거리가 증가함에 따라 접착력은 감소하고, 플라즈마 처리속도가 증가함에 따라 접착력은 감소하였다.

• 한국환경보건학회지
• /
• 제38권6호
• /
• pp.520-528
• /
• 2012

Objective: This study was performed to assess bacterial distribution concerned in sanitation management of public lavatory in Seoul. Methods: In this research, bacteriological investigation on public lavatory was accomplished for bidet water, bidet nozzle, washbowl and lavatory stool in the 50 public facilities such as public institutions, subway stations, cinema, department stores, large-scale buildings and hospitals amount to 374 specimens. Results: The geometric mean of colony forming unit(CFU) in total aerobic colony count were analyzed as follows; $5.2{\times}10^2/100cm^2$ on lavatory stool, $7.2{\times}10^3/ea$ on bidet nozzle, $7.8{\times}10^3/ea$ on center ring of washbowl, $1.4{\times}10/mL$ in bidet water (ml) and 7.0/ea on doorknob. Opportunistically pathogenic germs such as Staphylococcus aureus, Escherichia coli, Enterobacter cloacae, Pseudomonas aeruginosa were isolated in 3.7%, 5.9%, 3.2% and 1.9% of total specimens, respectively. Conclusion: The result of this study shows that there were some facilities where the pathogenic germs were detected to may cause urological infection. And the CFU of general bacteria as the representative indicator of disinfection and lavatory cleaning were high enough to imply the improvement of sanitation management of public lavatories should be contrived.

• 한국입자에어로졸학회지
• /
• 제15권1호
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.506-512
• /
• 2018

가정과 요식업 사업장에서 발생하는 미세먼지는 전체 미세먼지 배출량의 약 4%정도로 낮은 비율을 차지하고 있다. 하지만 요식업 사업장에서는 일시적 미세먼지 농도가 최대 60배 가까이 측정될 만큼 오염농도의 변화율이 매우 높다. 비산업 연소 사업장에서 발생하는 오염 물질은 입자상 미세먼지와 가스상 유기화합물로 구성되며, 이 오염물질을 제거하기 위해서 여러 집진원리 중 가스상 물질과 입자상 물질의 동시 제거에 효과적인 시스템인 세정집진을 적용하였다. 이는 이류체 분무 노즐을 이용한 가압수식 액체 분사 방법으로 브라운 운동의 확산 포집의 확률을 높인 방법이다. 제작된 미세먼지 제거 장치를 이용하여 노즐 분무 기압 조건과 각도 등에 따른 미세먼지 집진 시스템의 집진 효율성을 분석하였으며, 그 결과 미세먼지와 가스상 유기화합물 제거효율이 90% 이상을 만족하는 것을 확인하였다. 개발된 시스템은 기존 사업장 후드 시스템에 별도의 설치비용 없이 미세먼지 집진 제거가 가능하여 향후 높은 활용성이 기대된다.

• 방사성폐기물학회지
• /
• 제3권1호
• /
• pp.9-16
• /
• 2005

To evaluate parameters influencing on the dust removal of the High Temperature Filter(HTF) system, a computer simulation of fluid dynamics inside the system had been performed. The results showed that the optimum pulse jet periods were 50ms and 90ms for the 1000mm and 1500mm long filter elements respectively. Dust removal effect was very excellent under the pulse jet pressure of 3 bar. But the distance between the pulse jet nozzle and the venturi of a filter element had no meaningful effect on the performance with the variation from 5mm to 10mm. Compared to the dispersion mode of pulse jet, the collective mode of pulse jet flow was preferable in maintaining the pressure inside the system stable.

• 멤브레인
• /
• 제23권2호
• /
• pp.185-188
• /
• 2013

본 연구는 정밀여과용 관형 분리막 모듈 내에 자체 설계한 기체분사형 노즐을 장착하여 막오염 감소 효과에 따른 투과유속을 측정하였다. 원료 용액으로는 0.1 wt% yeast 입자를 사용하였으며 공기 주입에 따른 막오염 감소 효과를 확인하기 위하여 공기를 주입하지 않은 경우와 주입한 경우의 투과유속을 비교 분석하였다. 공기를 주입하지 않았을 경우 투과유속은 지속적으로 감소하였지만 공기를 주입할 경우 투과유속은 공기를 주입하지 않은 경우와 비교하여 30% 이상 향상됨을 확인하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.94-94
• /
• 2018

무인자동차 및 전기자동차 등 전장부품 및 메인보드에서의 오염 방지와 전자파에 의한 신호 간섭 현상에 따른 기기의 오작동을 방지하고자 MWCNT의 clustering 및 tangling현상을 활용하여 self cleaning 기능을 갖는 super hydrophobic 표면과 high aspect ratio에 의한 percolation 현상을 활용하여 전자파 차폐를 위한 낮은 표면저항을 만족하는 복합 재료로 구성된 코팅에 관하여 연구하였다. 이를 위해 isopropyl alcohol(IPA)을 용매로 산처리 한 MWCNT와 무기바인더, 불소계 실란을 첨가하여 초음파 분산을 함으로써 코팅액을 제조하였다. 이를 full cone nozzle type, 흡상식 스프레이 조건으로 알루미늄 시편위에 스프레이 코팅 후 열경화 하여 접촉각측정기로 측정 결과 $160^{\circ}$이상의 초발수 표면과 Low Resistivity Meter로 표면저항을 측정한 결과 $10^3{\Omega}/cm^2$ 이하의 낮은 코팅막을 구현하였으며 내구성 실험을 위한 항온항습 장비로 $80^{\circ}C$의 내열테스트 및 80%와 $80^{\circ}C$조건하에서의 내습테스트 결과 표면에 이상 없음을 확인하였고 열전도율 측정을 위해 밀도 측정 결과 $2.68g/cm^3$, 비열 측정 결과 $0.85J/g^{\circ}C$가 열확산율 측정결과 $88.64mm^2/s$가 측정 되었으며 밀도, 비열, 열확산율을 곱한 값인 $201.9W/m{\cdot}K$의 열전도를 갖는 코팅막을 구현하였다.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.157-165
• /
• 2017

The high-pressure resin transfer molding (HP-RTM) technology has been commercialized for fast production of fiber reinforced composite materials. The high-pressure mixing head was one of the most core component of the HP-RTM process. In this study, a mixing head was systematically designed, manufactured and evaluated. This mixing head was composed of a nozzle, a mixing chamber, a cleaning piston part, and an internal mold release part. In actual, a straight-type structure was newly designed instead of the conventional L-type structure for improving the maximum mixing pressure and mixing ratio precision. The performance of mixing head was showed maximum mixing pressure of 15.22MPa and mixing ratio precision of 0.12%. CFRP molding experiments were successfully obtained a 6~11 laminating carbon sheet using HP-RTM presses and specimen molds.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.725-736
• /
• 2016

There is a growing concern on the improvement of water distribution pipeline for multi-regional water supply system in Korea along with its aging infrastructure. Rehabilitation of large diameter pipeline is more efficient in cost and time compared to replacement with trenching. The procedure for rehabilitation are diagnosis, cleaning, spraying coating material, and final inspection. The internal state of pipeline was carefully diagnosed and got C grade, which required rehabilitation. We found that 17,274,787,000 Korean won could be saved after pipe surface coating because of increased C coefficient of Hazen-Williams equation. Optimal coating material was D polyurea. We also found optimal distance between spraying nozzle and pipe wall to be 70 - 80 cm, which were critical factors for coating quality. This study also illustrated the time for spray drying to be more than 30 min. These results could be used in the quality control process during rehabilitation of aged pipelines.

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.455-462
• /
• 2023

In this study, an automatic spraying lubrication system was developed to maintain the cleanliness of the switchgear when detecting the movement of the track through the switchgear. To develop this system, an air tank, valve block, and spray nozzle were designed, and the safety was secured through the pressure test of the prototype after designing the air tank. Furthermore, the environmental aspect was considered by minimizing the use of lubricant by enabling the mixing of air and lubricant through the production of a valve using the Venturi principle. The performance evaluation was conducted by implementing (producing) the injection system, and the product developed in this study was deemed installable in actual switchgear. It is expected that the proposed system will enable the maintenance of the cleanliness of the track during switching and reduce faults and malfunctions caused by switchgear defects.