• Journal of Power Electronics
• /
• v.3 no.2
• /
• pp.90-98
• /
• 2003

This paper presents a performance analysis in steady-state of a novel type Auxiliary Resonant Commutation Snubber-linked 3-level 3-phase voltage source soft switching inverter suitable and acceptable for high-power applications in comparison with other three types of 3-level 3-phase voltage source soft switching inverters. This soft switching inverter operation which can operate under a condition of Zero Voltage Switching (ZVS). The practical steady -state performances of this inverter are illustrated and evaluated on the basis of the experimental results.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.915-917
• /
• 1999

In this paper, a novel sliding surface is proposed by introducing a virtual state. This sliding surface has nominal dynamics of an original system and makes it possible that the Sliding Mode Control(SMC) technique is combined with the $H_{\infty}$ controller. Its design is based on the augument system whose dynamics have one higher order than that of the original system. The reaching phase is removed by setting an initial virtual state which makes the initial switching function equal to zero.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.548-558
• /
• 2012

In this paper, a novel offset-based single-state pulse width modulation (PWM) method for achieving zero common-mode voltage (CMV) and reducing switching losses in multilevel inverters is presented. The specific active switching state of the zero common-mode (ZCM) voltage that approximates the reference voltage can be deduced from the switching state sequence of the reduced CMV phase disposition PWM (CMV PD PWM) method. From the reference leg voltages for the zero common-mode voltage, an N-to-2-level transformation defines a virtual two-level inverter and the corresponding nominal leg voltage references. The commutation process of the reduced CMV PD PWM method in a multilevel inverter and its outputs can be simply followed in a nominal switching time diagram for the virtual inverter. The characteristics of the reduced CMV PD PWM and the single-state PWM for zero common-mode voltage are analyzed in detail in this paper. The theoretical analysis of the proposed PWM method is verified by experimental results.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.417-421
• /
• 2015

We analyzed 0.5-45 keV data of NGC 3227 observed by Suzaku six times between 2008 October 28 and December 2. The count-count plot between the 0.5-3 keV and 3-10 keV bands exhibits a clear break, separating the data into bright and faint phases. Applying the difference spectrum method and time-averaged spectral fits to the phase data, we found the presence of two kinds of variable primary X-rays, (1) a hard primary component with ${\Gamma}{\sim}1.7$ dominating in the faint phase and (2) a soft primary continuum with ${\Gamma}{\sim}2.4$ appearing in the bright phase, both affected by partial absorption. Considering their timing and spectral characteristics, component (1) is presumably identical to a Compton continuum in the low/hard state, while component (2) may correspond to the hard tail emission in the high/soft state, or compact-jet emission. In that case, an accretion ow onto the central super massive black hole in NGC 3227 can be interpreted to include the two different states.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1997

In this paper, a novel multivariable state feedback control with feedforward control is proposed to improve control performance of power conversion systems. The targets of the application are three-phase voltage-source PWM converter and inverter system, and current-source PWM converter and inverter system, of which equivalent circuits and models are derived and analyzed. Various simulation results are presented to verify the validity of the proposed scheme.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.509-518
• /
• 2019

A novel islanding detection method is proposed in this paper. It is based on a frequency drooping PLL, which was presented in a previous work. The cause of errors in the non-detection zone (NDZ) of conventional frequency disturbance islanding detection methods (IDM) is analyzed. A frequency drooping phase-locked-loop (FD-PLL) is introduced into a single-phase grid-connected inverter (SPGCI), which can guarantee that grid current is in phase with the grid voltage. A novel FD-PLL IDM is proposed by improving this PLL. In order to verify the performance of the proposed FD-PLL IDM, a full performance comparison between the proposed IDM and typical existing active frequency drift IDMs is carried out, which includes both dynamic performance and steady performance. With the same NDZ, the total harmonic distortion of the grid-current in the dynamic process and steady state is analyzed. The proposed FD-PLL IDM, regardless of the dynamic or steady process, has the best power quality. Experimental and simulation results verify that the proposed FD-PLL IDM has excellent performance.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1385-1392
• /
• 2018

A network with coupled biological neurons provides various forms of collective synchronous dynamics. Such phase-locking dynamics states resemble eigenvectors in a linear coupling system in that the forms are determined by the symmetry of the coupling strengths. However, the states behave as attractors in a nonlinear dynamics system. We here study the collective synchronous dynamics in a neural system by using a novel theory. We exhibit how the period and the stability of individual phase-locking dynamics states are determined by the characteristics of synaptic couplings. We find that, contrary to common sense, the firing rate of a synchronized state decreases with increasing synaptic coupling strength.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.333-334
• /
• 2015

본 논문은 단상 플라잉 커패시터 멀티레벨 인버터에서의 스위칭 상태 변화 횟수를 줄이는 새로운 기법을 제안하였다. 제안한 방법은 플라잉 커패시터 멀티레벨 인버터가 갖는 Redundant state 특성을 이용하며, 플라잉 커패시터 전압이 제어되는 범위 내에서 각 스위치가 최대한 적게 온/오프 하도록 Redundant state를 선택한다. 이를 단상 3-레벨 플라잉 커패시터 인버터에 적용하여 ＰＳＩＭ 시뮬레이션을 통해 유효성을 검증하였다.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.323-328
• /
• 1998

A current controlled VSI-PWM rectifier and inverter with capacitor dc link is regarded as one of the most promising structures for three-phase to three-phase to three-phase power conversion. This type of converter normally requires twelve switches for a rectifier and inverter composed of self turn-off switch such as a bi-polar transistor or IGBT with an anti-parallel diode. In this paper, a new three-phase to three-phase converter for ac motor drives is proposed. The proposed converter employs only eight switches and has the capability of delivering sinusoidal input currents with unity power factor and bidirectional power flow. This paper describes the feasibility and the operational limitations of the proposed structure. A mathematical model of the system is derived using generalized modulation theory and experimental results for steady state and dynamic behavior are presented to verify the developed model.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.208-214
• /
• 2012

This paper presents a novel approach based on the loci of instantaneous symmetrical components called "Wing Shape" which requires the measurement of three input stator currents and voltages to diagnose interturn insulation faults in three phase induction motors operating under different loading conditions. In this methodology, the effect of unbalanced supply conditions, constructional imbalances and measurement errors are also investigated. The sizes of the wings determine the loading on the motor and the travel of the wings while their areas determine the degree of severity of the faults. This approach is also applied to detect open circuit faults or single phasing conditions in induction motors. In order to validate this method, experimental results are presented for a 5 hp squirrel cage induction motor. The proposed technique helps improve the reliability, efficiency, and safety of the motor system and industrial plant. It also allows maintenance to be performed in a more efficient manner, since the course of action can be determined based on the type and severity of the fault.