• Journal of Life Science
• /
• v.10 no.2
• /
• pp.140-149
• /
• 2000

In order to utilize marine processing waste which would normally be discarded, cod liver protein was hydrolysed by ${\alpha}$-chymotrysin, and the hydrolysate was investigated for the new angiotensin I converting enzyme (ACE) inhibitor. Thy hydrolysate was separated into three major types, with molecular weight cut-off (MWCO) values less than 10 kDa, 5 kDa and 1 kDa of ultrafiltration membranes, respectively. ACE inhibitory peptides were isolated from the fractions passed through MWCO 1 kDa membrane, and purified by using ion-exchange chromatography on a SP-Sephadex C-25 column, gel filtration on a Sephadex G-15 column, and HPLC on an ODS column. The purity was identified with capillary electrophoresis. The amino acid sequences of two peptides were Met-Ile-Pro-Pro-Tyr-Tyr (IC50=10.9 ${\mu}$M) and Gly-Leu-Arg-Asn-Gly-Ile (IC50=35.0 ${\mu}$M)

• KCI Concrete Journal
• /
• v.12 no.1
• /
• pp.113-120
• /
• 2000

This paper presents the behavior and strengthening effect of reinforced concrete rectangular beams strengthened using CFRP sheets with different strengthening level. In general, normally strengthened beams are failed by interfacial shear failure (delamination) within concrete, instead of by tensile failure of the CFRP sheets. The delamination occurred suddenly and the concrete cover cracked vertically by flexure was spalled off due to the release energy. The strengthened beams were stiffer than the control beam before and after reinforcement yielding. The ultimate load considerably increased with an increase of strengthening level, while the ultimate deflection significantly decreased. The tensile force of CFRP sheets and average shear stress of concrete at delamination failure were curvilinearly proportional to the strengthening level. Therefore, the increment of ultimate load obtained by strengthening was curvilinearly proportional to the strengthening level. The averaged horizontal shear stress of concrete at the interface ranges between (equation omitted) and (equation omitted) (in kg/$\textrm{cm}^2$) depending on strengthening level.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.4
• /
• pp.231-236
• /
• 2004

A normally open thermopneumaticc-actuated microvalve has been fabricated and their properties are investigated. The advantages of the proposed microvalve are of the low cost fabrication process and the transparent optical property using polydimethylsiloxane (PDMS) and indium tin oxide (ITO) glass. The fabricated microvalves with in-channel configuration are easily integrated with other microfluidic devices on the same substrate. The fabrication process of thermopneumatic-actuated microvalvesusing PDMS is very simple and its performance is very suitable for a disposable lab-on-a-chip. The PDMS membrane deflection increases and the flow rates of the microchannel with microvalvels decrease as the applied power to the ITO heater increases. The powers at flow-off are dependent on the membrane thickness and the applied inlet pressure but are independent of the channel width of microvalves. The flow rate is well controlled by the switching function of ITO heater and the closing/opening times are around 20 sec and 25 sec, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.153-165
• /
• 1995

When an automatic course-keeping is introduced as is quite popular in modern navigation the closed-loop steering system consists of autopilot device power unit(or telemotor unit) steering gear ship dynamics and magnetic or gyro compass. We derive the mathematical model of each element of the automatic steering system. We provide a method of theoretical analysis on propulsive energy loss related to automatic steering of ships inthe open seas taking account of the on-off mechanism of power unit. Also we paid attention to dead band mechanism of autopilot device which is normally called weather adjustment. Next we make numerical calculation of the effects of autopilot control constants ont he propulsive energy loss for two kinds of ship a fishing boat and an ore carrier. Realistic sea and wind disturbances are employed in the calculation.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.564-576
• /
• 2017

${\cdot}$ GaN E-HEMT provides superior performance vs. Si MOSFET or IGBT, and also superior performance vs. SiC, below ~1200V ${\cdot}$ GaN E-HEMT is replacing Si MOSFET and IGBT in major application segments, and Industry Adoption will accelerate ${\cdot}$ Technology advances in GaN E-HEMT have made high-current true Normally-Off devices available in current ranges from 7A to 250A ${\cdot}$ While GaN has improved Properties vs. SiC or Si, different types of GaN devices offer different levels of performance or robustness ${\cdot}$ JEDEC Industrial-Grade Qualification of GaN E-HEMTs has been achieved, and Automotive Qualification is in progress.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.363-364
• /
• 2010

Most LED drivers uses current control method to adjust LED current. Using AC power grid such as off-line converter, Buck topology is popular because input voltage of LED driver is much higher than LED output voltage. Normally DCM current control is more popular than CCM current mode control in the range of below 50W, But DCM characteristics are dependent on the input voltage variation. This paper deals with what should be considered in DCM for LED driver with valley fill circuit.

• International journal of advanced smart convergence
• /
• v.10 no.1
• /
• pp.159-165
• /
• 2021

Electronic devices used in the mobile environments fabricated under the plasma conditions in high vacuum system. Especially for the development of advanced electronic devices, high quality plasma as the process conditions are required. For this purpose, the variable conductance throttle valves for controllable plasma employed to the high vacuum system. In this study, we analyzed the effects of throttle valve applications on vacuum characteristics simulated to obtain the optimum design modelling for plasma conditions of high vacuum system. We used commercial simulator of vacuum system, VacSim(multi) on this study. Reliability of simulator verified by simulation of the commercially available models of high vacuum system. Simulated vacuum characteristics of the proposed modelling agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve schematized as the modelling of throttle valve for the constant process-pressure of below 10-3 torr. Simulation results plotted as pump down curve of chamber, variable valve conductance and conductance logic of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably in plasma process.

• Journal of the Korean Society of Costume
• /
• v.66 no.1
• /
• pp.42-57
• /
• 2016

The Tibetan people are an ethnic group that is native to Tibet who have adapted to the region's harsh climate and environment, and developed their own culture. Religion played a central role in maintaining its traditional culture and society in the history. The objective of this study is to understand Tibetan costume and religion, and examine patterns that appear on the costume to study their religious symbolism. The significance of this study lies in explaining the symbolisms of the patterns that appear on the costume in terms of cultural maintenance and change. Based on literature review, I summarized the data about Tibet's environment, history and religion, and divided the residential district into three: ${\ddot{U}}$-Tsang, Amdo, Khamba. Then, I organized each region's characteristics and clothes, and studied Tibetan Buddhism (Vajrayana) costumes and features of the patterns that appear on the costumes. Through combining these data, I would like to examine the religious symbolism of the costume pattern of Tibet. Buddhism is at the heart of cultural and social maintenance and change in Tibet, and the patterns shown in the costume is influenced mostly from Buddhism. The features of general Tibetan costume vary with the region and life style, but the patterns that appear on the costume are used over a wide area to represent good luck and the spread of Buddhist teachings. The costumes for religious rites vary with religious sects, but most of the patterns are commonly used. The symbolism of pattern is a form of figure that represents the human psyche and physical world. The symbolism of pattern implies meanings such as compensation or futuristic wish. First, the lucky omen normally means long life, happiness and peace, and means religious salvation in Buddhist perspective. Second, warding off evil spirits normally means avoiding misfortune, and means dignity and self-protection, and protection of Buddhadharma in Buddhist perspective.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.146-149
• /
• 2017

In this paper, we propose a wide-range radiation measurement system using GM Tube and NaI(TI) detector. The proposed system is designed as a small module optimized to control and count the detector signal of NaI(Tl) Detector and GM Tube. The radiation dose is measured in a wide-range 0.1uSv/h to 10mSv/h in conjunction with two detectors, and two detectors operate simultaneously at 10uSv/h to 100uSv/h, where the measurement interval overlaps. The radiation dose was selected using a wide-range radiation measurement algorithm that controls the on/off function of the detector in the appropriate interval for the overlapped radiation measurable interval. In order to evaluate the performance of the proposed system, it has been confirmed that the measurement uncertainty of each section is measured as ${\pm}7.5%$ and it operates normally under ${\pm}15%$ of the international standard.

• Journal of the Korean Home Economics Association
• /
• v.45 no.7
• /
• pp.1-15
• /
• 2007

The purpose of this study is getting information for making a plan of immigrant workers in Korea. As a first step to suggest plans for immigrant workers who have multi-cultural background, this study investigated to the domestic living of Koreans(ChoSun-Tribe) of Gillim province in China. For this, usage of domestic space questionnaire were used. Results of the research were as follows. 1. The most popular LDK type was the one which kitchen was separated from living room and dining room. Most of them thought that kitchen and living room have to be separated. 2. There was no plan for laundry room specially and most houses have a washing machine in the bathroom. Most houses didn't install a bathtub in the bathroom and they didn't think that it was indispensable. 3. It was estimated that they used a living room as a multi-purpose room for the family but used a master bedroom for its own purpose. 4. They used a table and chair for meals normally but they took meals sitting on the floor with a large family or guest. 5.All of them took off the shoes inside of the house for hygienic reason. There was no plan for the space to take on-off shoes in most houses and they just put the mat on the floor for it. 6. Modified Ondol system which use water pipe under the floor was popular in apartment while most detached houses had traditional Ondol system. The satisfaction about Ondol system was very high compared to other ones and also Ondol system was the most desirable one for ChoSun-Tribe.