• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.105-118
• /
• 2015

PURPOSES : This study aims to evaluate the road safety of the super-elevation transition section of a left turn curve and suggest the minimum longitudinal grade of a super-elevation transition section to be used before and after a left curved section. METHODS : We evaluated the road condition by means of the safety-criterion-evaluation method involving side friction factors, and then solve the problem by introducing the minimum longitudinal grade criterion based on conditions described in the hydraulics literature. RESULTS : It was calculated that when a road satisfies hydroplaning conditions, the difference between side friction assumed and side friction demanded is less than -0.04. In this case, the safety criterion for the condition is unsatisfied. Conversely, when a road is in a normal state under either wet or dry conditions, it was calculated that the difference between side friction assumed and side friction demanded is more than 0.01. Thus, the safety criterion for this condition is found to be satisfied. After adjusting the minimum longitudinal grade applied to a super-elevation transition section, the hydroplaning condition can be eliminated and the safety criterion can be met for all sections. CONCLUSIONS : It is suggested that a minimum longitudinal grade should be provided on super-elevation transition sections in order to prevent hydroplaning.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1823-1831
• /
• 2010

This paper proposes an automatic tracking control algorithm for efficiency improvement of photovoltaic generation. Increasing the power of PV systems should improve the efficiency of solar cells or the power condition system. The normal alignment of the PV module always have to run perpendicular to the sun's rays. The solar tracking system, able to improve the efficiency of the PV system, was initiated by applying that to the PV power plant. The tracking system of conventional PV power plant has been studied with regard to the tracking accuracy of the solar cells. Power generation efficiency were increased by aligning the cells for maximum exposure to the sun's rays. Using a perpendicular position facilitated optimum condition. However, there is a problem about the reliability of tracking systems unable to not track the sun correctly during environmental variations. Therefore, a novel control algorithm needs to improve the generation efficiency of the PV systems and reduce the loss of generation. This control algorithm is the proposed automatic tracking algorithm in this paper. Automatic tracking control is combined the sensor and program method for robust control in environment changing condition. This tracking system includes the insolation, rain sensor and anemometer for climate environment changing. Proposed algorithm in this paper, is compared to performance of conventional tracking control algorithm in variative insolation condition. And prove the validity of proposed algorithm through the experimental data.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.41-49
• /
• 2003

Tube oscillation behaviour is experimentally investigated for the study on the fuel rod fretting that is caused by the flow-induced vibration in nuclear reactor. The experiment was conducted in all at room temperature. The specimen of tube assembly was supported by plate springs which simulated the spacer grids and fuel rods of a fuel assembly. To investigate the influence of contact condition between the grids and rods, normal load of 10 and 5 N, gaps of 0.1 and 0.3 mm were applied. The range of the oscillation at the center of the fuel rod specimen was varied as 0.2, 0.3 and 0.4 mm to simulate the fuel rod vibration due to flow. Displacements near the contact were measured with four displacement sensors during the tube oscillation. As results, the shape of oscillation (phase) varied depending on the contact condition. The oscillation displacement increased considerably from the contact to gap condition. The displacement increased further as the gap size increased. It is regarded that the spring shape influences the tube oscillation behaviour. Simple calculation showed that the slip displacement was very small. Therefore, cumulative damage concept is necessary for the fuel rod wear. The mechanism of plowing is thought required to explain the severe wear in the case of gap existence.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.289-289
• /
• 2008

We investigated the operational characteristics of the separated three-phase flux-lock type superconducting fault current limiter (SFCL). The single-phase lock type SFCL consist of two coils, which are wound in parallel through an iron core. The high-$T_c$ superconducting(HSTC) thin film connected in series with secondary coil. The separated three-phase flux-lock type SFCL consist of three single-phase flux-lock type SFCL. In a normal condition, the SFCL is not operate. When a fault occurs, the current of a HSTC thin film exceeds its critical current by fault current, the resistance of the HSTC thin film generated. Therefore fault current was limited by SFCL. The separated three-phase flux-lock type SFCL are operated in fault condition such as the the single line-to-ground fault, the double line-to-ground fault and the triple line-to-ground fault. The experimental results, the SFCL operational characteristics was dependent on fault condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.9-9
• /
• 2008

Recently, the thickness of solar cell gets thinner to reduce the quantity of silicon. And the reduced thickness make it easy to be broken while PV module fabrication process. This phenomenon might make PV module's maximum power and durability down. So, when using thin solar cell for PV module fabrication, it is needed to optimize the material and fabrication condition which is quite different from normal thick solar cell process. Normally, gel-content of EVA sheet should be higher than 80% so PV module has long term durability. But high gel-content characteristic might cause micro-crack on solar cell. In this experiment, we fabricated several specimen by varying curing temperature and time condition. And from the gel-content measurement, we figure the best fabrication condition. Also we examine the crack generation phenomenon during experiment.

• The Korean Journal of Rehabilitation Nursing
• /
• v.14 no.2
• /
• pp.118-128
• /
• 2011

Purpose: The purpose of this study was to explore the experiences of bereavement for main family members who had made and followed DNR decision for their family members. Method: This qualitative study was based on a grounded theory, and used in-depth interview techniques with the bereaved 10 main family members who had been treated and died under DNR order. Results: The causal condition of the family member was 'Releasing', and the main consequent phenomenon were 'Blaming self and ruminating'. The contextual condition was 'The memory of the deceased'. The action/reaction strategy was 'Purifying'. The intervening condition was 'Supporting system', and the consequence was 'Acceptance'. The experience after bereavement of the family member on DNR decision were rational processes that purified themselves and healed the guilt feeling about the decision from reflective assessment and response about DNR decision. Based on this results, the substantive theory 'Reflective self healing' was derived. Conclusion: The main family members in following DNR decision are more likely to have unhealthy emotional condition than others in normal bereavement process. But they overcame the grief of bereavement through reflective self healing process.

• Journal of Mechanical Science and Technology
• /
• v.20 no.2
• /
• pp.286-294
• /
• 2006

Flows in a ramjet inlet is simulated for the study of the rocket-ramjet transition. The flow is unsteady, two-dimensional axisymmetric, compressible and turbulent. Double time marching method is used for the unsteady calculation and HLLC method is used as a higher order MUSCL method. As for turbulent calculation, $\kappa-\omega$ SST model is used for more accurate viscous calculations. Sinusoidal pressure perturbation is given at the exit and the flow fields at the inlet is studied. The cruise condition as well as the ground test condition are considered. The pressure level for the ground test condition is relatively low and the effect of the pressure perturbation at the combustion chamber is small. The normal shock at the cruise condition is very sensitive to the pressure perturbation and can be easily detached from the cowl when the exit pressure is relatively high. The sudden decrease in the mass flux is observed when the inlet flow becomes subcritical, which can make the inlet incapable. The amplitude of travelling pressure waves becomes larger as the downstream pressure increases, and the wavelength becomes shorter as Mach number increases. The phase difference of the travelling perturbed pressure wave in space is 180 degree.

• Childhood Kidney Diseases
• /
• v.8 no.2
• /
• pp.138-148
• /
• 2004

Purpose: Regardless of the underlying diseases, the proteinuric condition demonstrates ultrastructural changes in podocytes with retraction and effacement of the highly specialized interdigitating foot processes. We examined the molecular basis for this alteration of the podocyte phenotypes, including quantitative and distributional changes of ZO-1 protein as a candidate contributing to the pathogenic changes in the barrier to protein filtration. Methods: To investigate whether high glucose and advanced glycosylation endproduct(AGE) induce podocyte cytoskeletal changes, we cultured rat GEpC under 1) normal glucose(5 mM=control) or 2) high glucose(30 mM) or 3) AGE-added or 4) high glucose plus AGE-added conditions. The distribution of ZO-1 was observed by confocal microscope and the change of ZO-1 expression was measured by Western blotting and RT-PCR. Results: By confocal microscopy, we observed that ZO-1 moves from peripheral cytoplasm to inner actin filaments complexes in both AGE-added and high glucose condition. In Western blotting, high glucose or AGE-added condition decreased the ZO-1 protein expression by 11.1%(P>0.05) and 2.3%(P>0.05), respectively compared to the normal glucose condition. High glucose plus AGE-added condition further decreased ZO-1 protein expression to statistically significant level(12%, P<0.05). No significant change was seen in the osmotic control. In RT-PCR, high glucose plus AGE-added condition significantly decreased the expression of ZO-1 mRNA by 12% compared to normal glucose condition. Conclusion: We suggest that both high glucose and AGE-added condition induce the cytoplasmic translocation and suppresses the production of ZO-1 at transcriptional level and these changes may explain the functional changes of podocytes in diabetic conditions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.111-117
• /
• 2007

The visual evoke potential(VEP) is the effective method to diagnose and treat the amblyopia or to check the infants visual ability. In order to evaluate the changes of P100 latencies and amplitudes of VEP by intensity of illumination and refractive errors, we measured latencies and amplitudes of 41 normal adults (20/20 VA) who have no ocular diseases and neurologic diseases. The results were as follows: In the scotopic condition, the latencies were N75$75.83{\pm}3.69$ msec, P100$103.48{\pm}5.34$ msec, the P100 amplitude was $14.86{\pm}2.43$ msec, and in the photopic condition, the latencies were N75$76.71{\pm}3.11$ msec, P100$107.26{\pm}5.54$ msec and the P100 amplitude was $10.35{\pm}1.75$ msec. The latencies and amplitudes of P100 in the photopic condition had higher values than those in the scotopic condition and the measures were significantly different between the scotopic and photopic condition (p<0.01). The P100 latencies were delayed both in the scotopic and photopic condition with the refractive errors and those measures were delayed more than in the photopic condition. The P100 amplitudes in the induced myopic and hyperopic conditionsreduced than in the emmetopes in both illumination conditions. The P100 latencies and amplitudes in emmetropes showed a correlation with the induced myopic conditions in the scotopic condition. Those results showed that P100 latencies and amplitudes are dependent on the illumination conditions and refractive errors. And we suggest that those results would be useful to determine and evaluate the normal range for the person considering patients' refractive errors and illumination of the test room.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.7 no.1
• /
• pp.110-119
• /
• 1996

Heller recognized the children exhibiting developmental regression after normal period of development and proposed the term 'dementia' infanilis for the condition and reported it 1908. But the foolowing studies were insufficient, the diagnostic concept was not definded, and various names such as dementia infantilis, Heller's syndrome, disintegrative psychosis and childhood disintegrative disorder have been used for that condition. Recently the term childhood disintegrative disorder fir that condition was proposed as independent disease entity by DSM-IV and ICD-10, and the interset in that condition is increasing now. But because of insufficient previous studies on that condition, the definite concept, the characteristics, the relationship with autism or other similar conditions, the treatment and prognosis of that condition are not clear by this time, therefore we have not seen the official report on the condition in our country. These authors experienced a case considered as childhood disintegrative disorder and report it with the review of literatures.