• 동력기계공학회지
• /
• 제13권6호
• /
• pp.43-50
• /
• 2009

If an internal combustion engine is operated by consolidated control, the minimum fuel consumption is achieved satisfying the demanded objectives. For this, it is necessary that the engine is operated on the ideal operating line which satisfies minimum fuel consumption. In this context of view, there are many tries to achieve given object. However, the parameter in the internal combustion engines are variable and depend on the operating points. Therefore, it is necessary to cope with the uncertainties such that the optimal operating may be possible. From this point of view, this paper gives a controller design method and a robust stability condition for engine torque control which satisfies the given control performance and robust stability in the presence of physical parameter perturbation. Exactly, the present paper considers a robust stability of this 2DOF servosystem with nonlinear type uncertainty in the engine system, and a robust stability condition for the servosystem is introduced. This result guarantees that if the plant uncertainty is in the permissible set defined by the given condition then a gain tuning can be carried out to suppress the influence of the plant uncertainties.

• 대한교통학회지
• /
• 제18권1호
• /
• pp.61-73
• /
• 2000

이 논문은 변동부등식을 제약조건으로 하는 연속형 변수의 가로망 설계 문제를 풀기 위한 해석 알고리즘을 제시하는 것을 목적으로 한다. 가로망 설계 문제는 문제의 특성상 비선형의 목적함수와 비선형. 비볼록한 제약식으로 인해 다수의 국지해를 갖으며, 이러한 여러 국지해 중 가장 최적의 해를 구하는 것에 관심이 모아지고 있다. 전역 최적해를 찾을 수 있는 기존의 방법들은 확률적 최적화 방법에 속하는데 이 논문에서는 유전자 알고리즘의 접근법을 사용하여 2개의 다른 예제 가로망에서 5개의 서로 다른 해석 알고리즘에 대한 비교를 행하였으며. 그 해석결과를 기술하였다. 이 논문에서 사용된 정책결정자의 설계 변수는 가로망상 링크의 용량 변수이며, 연속형 변수의 어떤 설계 변수에도 적절한 변환과정을 거쳐 사용이 가능하다.

• Computers and Concrete
• /
• 제16권1호
• /
• pp.99-123
• /
• 2015

In this study, structural vulnerability of reinforced concrete moment resisting frames (RC-MRFs) by considering the Iran-specific characteristics is investigated to manage the earthquake risk in terms of multicomponent seismic excitations. Low and medium rise RC-MRFs, which constitute approximately 80-90% of the total buildings stock in Iran, are focused in this fragility-based assessment. The seismic design of 3-12 story RC-MRFs are carried out according to the Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard No. 2800), and the analytical models are formed accordingly in open source nonlinear platforms. Frame structures are categorized in three subclasses according to the specific characteristics of construction practice and the observed seismic performance after major earthquakes in Iran. Both far and near fields' ground motions have been considered in the fragility estimation. An optimal intensity measure (IM) called Sa, avg and beta probability distribution were used to obtain reliable fragility-based database for earthquake damage and loss estimation of RC buildings stock in urban areas of Iran. Nonlinear incremental dynamic analyses by means of lumped-parameter based structural models have been simulated and performed to extract the fragility curves. Approximate confidence bounds are developed to represent the epistemic uncertainties inherent in the fragility estimations. Consequently, it's shown that including vertical ground motion in the analysis is highly recommended for reliable seismic assessment of RC buildings.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1029-1037
• /
• 2010

If an internal combustion engine is operated by consolidated control, the minimum fuel consumption is achieved and the demanded objectives are satisfied. For this, it is necessary that the engine is operated on the ideal operating line which satisfies minimum fuel consumption. In this context of view, there are many tries to achieve given object. However, the parameters in the internal combustion engines are variable and depend on the operating points. Therefore, it is necessary to cope with the uncertainties such that the optimal operating may be possible. From this point of view, this paper gives a controller design method and a robust stability condition for engine torque control which satisfies the given control performance and robust stability in the presence of physical parameter perturbation. Exactly, in this paper, we consider the robust stability problem of this 2DOF servosystem with nonlinear type uncertainty in the engine system, and a robust stability condition for the servosystem is shown. This result guarantees that if the plant uncertainty is in the permissible set defined by the given condition, then a gain tuning can be carried out to suppress the influence of the plant uncertainties.

• 한국통신학회논문지
• /
• 제19권12호
• /
• pp.2353-2363
• /
• 1994

본 논문에서는 외란이 존재하는 로보트 시스템에 대하여, 축소차수관측기를 사용하여 강인한 디지털 제어기의 설계방법을 다루었다. 대부분의 로보트 매니퓰레이터 경우는 상태변수 모두를 측정할 수 없기 때문에 측정할 수 없는 상태변수들은 추정되거나 재구성되어야 한다. 또 다른 문제점들은 미분불가능한 쿨롱마찰력과 같은 비선형 성분, 중력에 의한 외란, 그리고 구동모터와 매니퓰레이터 사이에 존재하는 뒤틀림 스프링 효과이다. 제어기의 설계는 측정가능한 상태변수와 축소차수 관측기에 의하여 추정한 상태변수들을 궤환시키고 출력 쪽에 이산적분기를 첨가하여 구성하였다. 제어기의 궤환이득은 우선 최적제어이론에 의해 구하고, 만약 시스템 응답이 리미트싸이클을 가지면 혼성시스템에 대한 기술함수법을 적용해서 제어기의 이득을 재조정하여 리미트싸이클을 제거하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.57-62
• /
• 2003

This paper describes the design and simulation of a multivariable optimal control system for the combined speed, heading and depth control of a Semi-Autonomous Underwater Vehicle (SAUV) developed in Korea Ocean Research and Development Institute (KRODI). The SAUV is a test-bed for the evaluation of the navigation and manipulator technologies developed for a mine disposal vehicle (MDV) in military use and for a light working underwater vehicle in scientific use. The vehicle was designed to control its cruising speed, heading and depth with 4 horizontal thrusters installed at the rear of the hull. Therefore, the decoupled control methods are limited to apply to the SAUV because the thrust forces are highly coupled with the surging, yawing, and pitching motion of the vehicle. The multivariable Linear Quadratic (LQ) control method is chosen to control steering and diving in variable speed motion automatically. A series of simulation is carried out with fully nonlinear six degree of freedom dynamic model to validate the controller.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.251-258
• /
• 2004

This paper presents the parameter study of multiple tuned liquid damper (MTLCD) applied to the 76-story benchmark building. A parameter study involves the effects of number of TLCD, frequency range, and central tuning frequency ratio, which are important parameters of MTLCD. The performance of MTLCD is carried out numerical analysis which reflects the nonlinear property of liquid motion. The parameters of TLCD exist different each optimal values according to mass ratio. The performance of single-TLCD (STLCD) is sensitive for tuning frequency ratio. Therefore, MTLCD is proposed to protect such the shortcoming of STLCD. The result of numerical analysis presents improved performance for robustness of MTLCD

• Structural Engineering and Mechanics
• /
• 제32권1호
• /
• pp.21-36
• /
• 2009

An importance sampling method is presented for computing the first passage probability of elasto-plastic structures under stochastic excitations. The importance sampling distribution corresponds to shifting the mean of the excitation to an 'adapted' stochastic process whose future is determined based on information only up to the present. A stochastic control approach is adopted for designing the adapted process. The optimal control law is determined by a control potential, which satisfies the Bellman's equation, a nonlinear partial differential equation on the response state-space. Numerical results for a single-degree-of freedom elasto-plastic structure shows that the proposed method leads to significant improvement in variance reduction over importance sampling using design points reported recently.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.225-232
• /
• 2014

The traditional RAP (Redundancy Allocation Problem) of complex systems has considered only the redundancy of subsystem with homogeneous components. In this paper we extend it as a RAP of complex systems with heterogeneous components which is more flexible than the case of homogeneous components. We model this problem as a nonlinear integer programming problem, find its optimal solution by tabu search, and suggest an example of the efficient reliability design with heterogeneous components. In order to improve the quality of the solution of the tabu search, we suggest a modified tabu search to employ an adaptive procedure (1-opt or 2-opt exchange) to generate the efficient neighborhood solutions. Computational results show that our modified procedure obtains better solutions as the size of problem increases from 30 to 50, even though it requires rather more computing time. With some adjustment of the parameters of the proposed method, it can be applied to the optimal reliability designs of complex systems of ships.

• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.88-95
• /
• 1999

스텍필터는 신호복원성이 뛰어난 디지털 비선형 필터의 일종이다. 그러나 기존의 적응형 설계기법을 이요하면 순차적인 특성 때문에 윈도우의 크기가 큰 스텍필터의 설계시 많은 계산량으로 그 응용에 한계가 있었다. 본 논문에서는 평균적대오차를 최소화하는 최적의 스텍필터를 설계하기 위한 병렬구조의 기법을 제안하였고 제안된 기법을 사용하면 적응특성 즉 학습의 반복적인 특성을 가지면서 최적의 필터로 수령하는데 필요한 반복 횟수를 줄임으로써 기존의 설계기법보다 설계시간을 단축할 수 있다는 사실과 제안된 기법이 최적의 스텍필터로 수렴한다는 사실을 증명하였다.