• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.857-868
• /
• 2005

This paper deals with the accumulated damage in concrete structures due to the cyclic freeze-thaw as an environmental load. The cyclic ice body nucleation and growth processes in porous systems are affected by the thermo-physical and mass transport properties, and gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and diffusion of chloride ion effects are hard to be identified in tests, and there has been no analytic model for the combined degradations. The main objective is to determine the driving force and evaluate the reduced strength and stiffness by freeze-thaw. For the development of computational model of those coupled deterioration, micro-pore structure characterization, pore pressure based on the thermodynamic equilibrium, time and temperature dependent super-cooling with or without deicing salts, nonlinear-fracture constitutive relation for the evaluation of internal damage, and the effect of entrained air pores (EA) has been modeled numerically. As a result, the amount of ice volume with temperature dependent surface tensions, freezing pressure and resulting deformations, and cycle and temperature dependent pore volume has been calculated and compared with available test results. The developed computational program can be combined with DuCOM, which can calculate the early aged strength, heat of hydration, micro-pore volume, shrinkage, transportation of free water in concrete. Therefore, the developed model can be applied to evaluate those various practical degradation cases as well.

• Journal of Pharmaceutical Investigation
• /
• 제25권2호
• /
• pp.129-136
• /
• 1995

In order to reduce the systemic side effects and the gastrointestinal irritation of indomethacin following its oral administration, the drug was formulated as a transdermal gel using poloxamer 407. In vitro diffusion cells fitted with excised rat skins were used to evaluate the effects of formulation variables on skin permeation of indomethacin from poloxamer gels. The formulation variables were the concentrations of indomethacin, poloxamer 407 and ethanol, and the gel pH. The increase of the drug amount in the gel from 0.5% to 2.0% induced a direct but nonlinear increase in the skin permeation rate of indomethacin. The increase of poloxamer concentration from 17.5% to 25% in the gel resulted in a decrease of skin permeation rate of indomethacin, which was due to a reduction in the amount of free drug molecules available for permeation through skin by entrapping more drug molecules within the micelles formed by poloxamer. The increase of ethanol concentration from 10% to 20% in the gel resulted in a linear increase of permeation rate of indomethacin through skin, possibly due to the penetration enhancing effect of ethanol. The skin permeation of indomethacin was substantially influenced by the gel pH, exhibiting a maximum at pH 4.

• 한국결정성장학회지
• /
• 제19권4호
• /
• pp.172-183
• /
• 2009

For the effects of the nonlinear temperature profiles and reduced-gravity conditions we conduct a two-dimensional numerical modeling and simulations on the physical vapor transport processes of $Hg_2Cl_2-Xe$ system in the horizontal orientation position. Our results reveal that: (1) A decrease in aspect ratio from 5 to 2 leads to an increasingly nonuniform interfacial distribution and enhances the growth rate by one-order magnitude for normal gravity and linear wall temperature conditions. (2) Increasing the molecular weight of component B, Xenon results in a reduction in the effect of solutal convection. (3) The effect of aspect ratio affects the interfacial growth rates significantly under normal gravity condition rather than under reduced gravitational environments. (4) The transition from the convection-dominated regime to the diffusion-dominated regime ranges arises near at 0.1g$_0$ for operation conditions under consideration in this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.546-549
• /
• 1999

For the safty driving of an automobile which is become individual requisites, a new Neural Network algorithm which recognized the load vehicles in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of vehicles, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear image information is processed 1-D LIPN hardware has been composed and various experiments with static and dynamic signals have been implmented.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.426-434
• /
• 2000

This paper deals with a generalized similarity solution for the one-dimensional solidification of ternary or higher-order multicomponent alloys. The present approach not only retains the existing features of binary systems such as temperature- solute coupling, shrinkage-induced flow, solid-liquid property differences, and finite back diffusion, but also is capable of handling a multicomponent alloy without restrictions on the partition coefficient and microsegregation parameter. For an alloy of N-solute species, governing equations in the mushy region reduce to (N+2) nonlinear ordinary differential equations via similarity transformation, which are to be solved along with the closed-form solutions for the solid and liquid regions. A linearized correction scheme adopted in the solution procedure facilitates to determine the solidus and liquidus positions stably. The result for a sample ternary alloy agrees excellently with the numerical prediction as well as the reported similarity solution. Additional calculations are also presented to show the utility of this study. Finally, it is concluded that the present analysis includes the previous analytical approaches as subsets.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.249-255
• /
• 2007

Under the situation of a fire, it is difficult for a rescue robot to use sensors such as vision sensor, ultrasonic sensor or laser distance sensor because of diffusion, refraction or block of light and sound by dense smoke. But, braille blocks that are installed for the visaully impaired at public places such as subway stations can be used as a map for autonomous mobile robot's localization and navigation. In this paper, we developed a laser sensor stan device which can detect braille blcoks in spite of dense smoke and integrated the device to the robot developed to carry out rescue mission in various hazardous disaster areas at KIST. We implemented MCL algorithm for robot's attitude estimation according to the scanned data and transformed a braille block map to a topological map and designed a nonlinear path tracking controller for autonomous navigation. From various simulations and experiments, we could verify that the developed laser sensor device and the proposed localization method are effective to autonomous tracking of braille blocks and the autonomous navigation robot system can be used for rescue under fire.

• Korea-Australia Rheology Journal
• /
• 제17권2호
• /
• pp.47-62
• /
• 2005

The present study deals with a mathematical model describing the dynamic response of heat and mass transfer in blood flow through bifurcated arteries under stenotic condition. The geometry of the bifurcated arterial segment possessing constrictions in both the parent and the daughter arterial lumen frequently appearing in the diseased arteries causing malfunction of the cardiovascular system, is formulated mathematically with the introduction of the suitable curvatures at the lateral junction and the flow divider. The blood flowing through the artery is treated to be Newtonian. The nonlinear unsteady flow phenomena is governed by the Navier-Stokes equations while those of heat and mass transfer are controlled by the heat conduction and the convection-diffusion equations respectively. All these equations together with the appropriate boundary conditions describing the present biomechanical problem following the radial coordinate transformation are solved numerically by adopting finite difference technique. The respective profiles of the flow field, the temperature and the concentration and their distributions as well are obtained. The influences of the stenosis, the arterial wall motion and the unsteady behaviour of the system in terms of the heat and mass transfer on the blood stream in the entire arterial segment are high­lighted through several plots presented at the end of the paper in order to illustrate the applicability of the present model under study.

• 한국항공우주학회지
• /
• 제39권5호
• /
• pp.400-407
• /
• 2011

전해질 막의 응력 및 변화폭의 분포는 고분자 전해질 연료전지 (PEMFC, Polymer Electrolyte Membrane Fuel Cell)의 피로수명의 중요한 인자이다. 본 논문에서는 연료전지 운전조건의 hygro-thermal 조건에 의해 전해질 막에 발생하는 기계적 응력 해석을 모델링 하였다. 기체확산층과 전해질 막 사이의 접촉해석이 여러 가지 온도, 습도 조건에 대하여 수행되었다. 구조 모델은 온도와 상대습도에 의존하는 비선형 재료물성을 적용하였다. 몇 가지 기하학적 조건들이 모델에 적용되었다. 구조해석 결과는 전해질 막의 변형이 체결조건에 크게 의존함을 보여주었다. 실험 데이터와의 비교를 통해 운전 조건에 대하여 피로수명 예측이 수행되었다.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.13-24
• /
• 1993

해양오염은 환경파괴의 주요 인자이다. 해양바닥에 가라않은 오염물질을 근본적으로 제거하는 문제와는 별도로, 파동(wave)에 의해 그것이 자동적으로확산될 수가 있다. 파문(ripple)으로 덮혀진 해저(sea bottom)에서 표면의 중력파에 의한 물의 수평방향 요동운동은 와류(vrotices)를 발생시칸다. 이런한 유동장은 해저 침전물을 부유시켜 멀리까지 화가신시키는 작용을 한다.파문주위의 유동장을 살펴보면 모서리(crest)에서 발생된 와류로 인해 정상유동성분이 존재하며 이런한 정상유동은 파문의 주기적 형상으로인해 다분히 순환적이다. 이ㅔ 파동에 의한 요동운동이 가세하면 Taylor 와류와 같은 효과를 보여 줄 것이다. 해저부근에서의 이러한 확산효과를 보기 위하여, 해양유동을 단순화하여 최근 널리 이용되고 있는 혼돈이론을 가미시켰다. 아주 단순한 유동이라도 복잡한 입자의 궤적을 나타내며 입자의 확산과 연관됨을 수치해석을 이용하여 보여준다.

• 천문학회지
• /
• 제36권3호
• /
• pp.111-121
• /
• 2003

In order to explore the cosmic ray acceleration at the cosmological shocks, we have performed numerical simulations of one-dimensional, plane-parallel, cosmic ray (CR) modified shocks with the newly developed CRASH (Cosmic Ray Amr SHock) numerical code. Based on the hypothesis that strong Alfven waves are self-generated by streaming CRs, the Bohm diffusion model for CRs is adopted. The code includes a plasma-physics-based 'injection' model that transfers a small proportion of the thermal proton flux through the shock into low energy CRs for acceleration there. We found that, for strong accretion shocks with Mach numbers greater than 10, CRs can absorb most of shock kinetic energy and the accretion shock speed is reduced up to $20\%$, compared to pure gas dynamic shocks. Although the amount of kinetic energy passed through accretion shocks is small, since they propagate into the low density intergalactic medium, they might possibly provide acceleration sites for ultra-high energy cosmic rays of $E\ll10^{18}eV$. For internal/merger shocks with Mach numbers less than 3, however, the energy transfer to CRs is only about $10-20\%$ and so nonlinear feedback due to the CR pressure is insignificant. Considering that intracluster medium (ICM) can be shocked repeatedly, however, the CRs generated by these weak shocks could be sufficient to explain the observed non-thermal signatures from clusters of galaxies.