• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.167-174
• /
• 2012

In the manufacturing process the most widely used $\bar{X}$ chart has been applied to control the process mean. Also, Accelerated Life Test(ALT) is commonly used for efficient assurance of product life in development phases, which can be applied in production reliability acceptance test. When life data has lognormal distribution, through censored ALT design so that censored ALT data has asymptotic normal distribution, $ALT\bar{X}$ control chart integrating $\bar{X}$ chart and ALT procedure could be applied to control the mean of process in the manufacturing process. In the situation that process variation is controlled, $Z_p$ control chart is an effective method for the very small fraction nonconforming of quality characteristic. A simultaneous control scheme with $ALT\bar{X}$ control chart and $Z_p$ control chart is designed for the very small fraction nonconforming of product lifetime.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.04a
• /
• pp.325-329
• /
• 2006

In this paper, the Bayesian procedure for the multiple test of fraction nonconforming, p, is proposed. It is the procedure for checking whether the process is out of control, in control, or under the permissible level for p. The procedure is as follows: first, setting up three types of models, $M_1:p=p_0,\;M_2:pp_0$, second, computing the posterior probability of each model. and then choosing the model with the largest posterior probability as a model most fitted for the observed sample among three competitive models. Finally, the simulation study is performed to examine the proposed method.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.04a
• /
• pp.319-324
• /
• 2006

In this paper, we propose Bayesian procedure for the multiple change points analysis in a sequence of fractions nonconforming. We first compute the Bayes factor for detecting the existence of no change, a single change or multiple changes. The Gibbs sampler with the Metropolis-Hastings subchain is run to estimate parameters of the change point model, once the number of change points is identified. Finally, we apply the results developed in this paper to both a real and simulated data.

• Journal of Korean Society for Quality Management
• /
• v.32 no.2
• /
• pp.191-200
• /
• 2004

Using the p chart is not adequate in case that there are lots of data and it is difficult to divide into products conforming or nonconforming because of obscurity of binary classification. So we need to design a new control chart which represents obscure situation efficiently. This study deals with the method to performing arithmetic operation representing fuzzy data into fuzzy set by applying fuzzy set theory and designs a new control chart taking account of a concept of classification on the term set and membership function associated with term set.

• Journal of the Korean Mathematical Society
• /
• v.39 no.3
• /
• pp.363-376
• /
• 2002

Stability result is obtained for the approximation of the stationary Stokes problem with nonconforming elements proposed by Douglas et al [1] for the velocity and discontinuous piecewise constants for the pressure on qudrilateral elements. Optimal order $H^1$and $L^2$error estimates are derived.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.3
• /
• pp.343-357
• /
• 1996

• Journal of Korean Institute of Industrial Engineers
• /
• v.11 no.2
• /
• pp.19-27
• /
• 1985

Optimal numbers of repeat inspections are obtained for a single inspector who has a fixed probability of detecting a nonconforming item on each inspection and will continue to inspect until further inspection is not warranted when comparing the expected increase of total gain with the inspection cost. It is assumed that the detection probability decreases as the number of repeat inspections increases, and that the lot to be inspected contains an unknown but Poisson distributed number of nonconforming items.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.16 no.1
• /
• pp.1-13
• /
• 2012

In this paper we present an a posteriori error estimator for the stabilized P1 nonconforming finite element method of the linear elasticity problem based on a nonsymmetric H(div)-conforming approximation of the stress tensor in the first-order Raviart-Thomas space. By combining the equilibrated residual method and the hypercircle method, it is shown that the error estimator gives a fully computable upper bound on the actual error. Numerical results are provided to confirm the theory and illustrate the effectiveness of our error estimator.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.3-10
• /
• 1993

A new three-dimensional transition solid elements was presented for the automated three-dimensional adaptive h-refinement where the steep stress gradient exists. To be consistent with 8-node solid element with nonconforming modes in accuracy, these transition elements were improved through the addition of the associated nonconforming modes. Numerical examples show that the performance of the element and the applicability to 3D adaptations are satisfactory.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.283-293
• /
• 2008

Analysis of Means(ANOM) is a visualization tool for comparing several means to the grand mean like control chart type. This paper reviews five ANOM methods for continuous data such as ANOM, ANOME (ANOM for Treatment Effects), ANCON (Analysis of Contrasts), ANOMV (ANOM for Variance), ANOMC (ANOM for Correaltion). Three ANOM tools for discrete data such as ANOMNP (ANOM for Nonconforming Proportions), ANOMNC (ANOM for Nonconforming Unit), ANOMNPU (ANOM for Nonconfirmities Per Unit) are also developed.