• 보존과학연구
• /
• s.27
• /
• pp.203-214
• /
• 2006

The work focuses on the chemical analysis of organic residues in archaeological soils. Particularly, the detection of manuring in archaeological soils can provide important information concerning early human behavior, diet, parasites, ecological adeptation. In this study, archaeological soils excavated at bunto-ri, Haenam and kumjang-ri, Kyungju were used to assess the possibility as indicators of ancient human activity in archaeological areas. The sampled soils were analyzed soil color, pH for their physical and chemical properties and GC/MSD to detect and quantify specific compound. The results showed that the sampled soils were normal pH(6.8~7.2) and soil color of light brown to yellowish brown. Also, the result from the GC/MS analysis indicated that their compounds were hexadecanoic acid, octadecanoic acid, nonadecane, docosanoic acid, methyl ester, teracosanoic acidand methyl este from bunto-ri site and 1-heptadecene, cyclotetracosane, tetracosane, cyclotetracosane,1-docosene, n-nonadecane, tetracosanoic acid methyl ester, cyclooctacosane, 1-nonadecene, eicosane, cyclotriacontane from kumjang-ri site. These compounds are not only normal soil materials but also animal lipid compounds. And the more scientific analysis of the soils will solve a curiosity for artificially incoming.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1253-1268
• /
• 2014

This study was investigated twenty two hazardous chemicals compounds for effluents of nine sewage treatment plants (STPs) and one waste water treatment plant (WWTP) in the Nakdong Ri-ver Basin. They are eleven phthalates(DMP, DEP, DIBP, DBP, BEEP, DNPP, DHP, DCP, DEHP, DNOP, Dinonyl phthalate, seven aliphatic hydrocarbons(n-Tridecane, n-Tetradecane, n-Pentadecan-e, n-Hexadecane, n-Heptadecane, n-Octadecane, n-Nonadecane, Isoquinoline, 2-Chloropyridine, 2-N-itrophenol, and Benzophenone. The twenty two compounds were analyzed by gas chromatograp-hy mass spectrometry (GC/MS) with liquid-liquid extraction (LLE). Twenteen of twenty two subs-tances were detected. They were DMP, DEP, DIBP, DBP, DEHP, n-Tetradecane, n-Pentadecane, n-Heptadecane, n-Octadecane, n-Nonadecane, Isoquinoline and Benzophenone. Among these, DEHP, DEP and Benzophenone were most frequently observed. They were obtained as $ND{\sim}36.881{\mu}g/L$, $ND{\sim}0.950{\mu}g/L$, $ND{\sim}2.019{\mu}g/L$, respectively. When the substances were calculated the average concentration at 10 points, the maximum average detection concentration was investigated at the Dalseocheon STP.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.151-152
• /
• 2008

PCM has the ability to change their state, these materials absorb energy during the heating process as a body contact and release energy during a reverse cooling process as phase change take place. Using the thermal energy storage of PCM which has a melting point 15 to $35^{circ}C$ is one of the most effective ideas for utilization in textile finish. In this study, microencapsulated PCM(MCPCM) were synthesized by sol-gel method using the octadecane(or nonadecane) as PCM and the silica as microcapsule materials. To develop smart temperature adaptable textile, coating process was applied to textile substrate using a composition included MCPCM.

• Analytical Science and Technology
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2016

It is believed that traditional Korean medicines can be managed more scientifically through the development of logical criteria to verify their region of cultivation, and that this could contribute to the advancement of the traditional herbal medicine industry. This study attempted to determine such criteria for Sansuyu. The volatile compounds were obtained from 20 samples of domestic Corni fructus (Sansuyu) and 45 samples of Chinese Sansuyu by steam distillation. The metabolites were identified in the NIST Mass Spectral Library via the obtained gas chromatography/mass spectrometer (GC/MS) data of 53 training samples. Data binning at 0.2 min intervals was performed to normalize the number of variables used in the statistical analysis. Multivariate statistical analyses, such as principle component analysis (PCA), partial least squares-discriminant analysis (PLS-DA), and orthogonal partial least squares-discriminant analysis (OPLS-DA) were performed using the SIMCA-P software package. Significant variables with a variable importance in the projection (VIP) score higher than 1.0 were obtained from OPLS-DA, and variables that resulted in a p-value of less than 0.05 through one-way ANOVA were selected to verify the marker compounds. Finally, among the 11 variables extracted, 1-ethylbutyl-hydroperoxide (9.089 min), nonadecane (20.170 min), butylated hydroxytoluene (25.319 min), 5β,7βH,10α-eudesm-11-en-1α-ol (25.921 min), 7,9-bis(2-methyl-2-propanyl)-1-oxaspiro[4.5]deca-6,9-diene-2,8-dione (34.257 min), and 2-decyldodecyl-benzene (54.717 min) were selected as markers to indicate the origin of Sansuyu. The statistical model developed was suitable for the determination of the geographical origin of Sansuyu. The cultivation areas of four Korean and eight Chinese Sansuyu samples were predicted via the established OPLS-DA model, and it was confirmed that 11 of the 12 samples were accurately classified.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.991-998
• /
• 2008

This study is to determine the effects of PCM concentration on the temperature changes of the air layers of a garment when the environmental temperature changes. The selected PCM was Nonadecane and coated on cotton fabrics with PCM concentrations 10%, 20%, and 30%. The temperature changes of the air layers between fabrics were measured by Human-Clothing-Environment Simulator which measure a dynamic heat transfer. After stabilizing at $34^{\circ}C$ for 1 hour, the multi layered garment system were exposed to $5^{\circ}C$ or $10^{\circ}C$ for 30 minutes and then, exposed to $34^{\circ}C$ for 30minutes. The results like following could be obtained. When the environmental temperature changed high to low, temperature of the air layer increased by heating effect of PCM. In the contrast, when the environmental temperature changed low to high, the temperature increase of the air layer was delayed because of cooling effect by PCM. Also, the more concentration of PCM, the bigger the heating effect. Cooling effect showed more clearly at PCM concentration 20%. The temperature differences of the air layers between with PCM fabrics and with non-PCM fabrics were bigger at $10^{\circ}C$ than at $5^{\circ}C$. Consequently, though PCM has influenced on the temperature of the air layer by heating and cooling effect, those effects haven't shown in all layers equally. It was shown that the effect of PCM varied according to the layer in the case of multi layered garment system and heat gain as well as heat loss in the outermost layer had to be taken into account.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.273-284
• /
• 2001

A series of microcapsule were synthesized by using several PCM(Phase Change Material) as a core material and gelatin/arabic gum, melamine/formaldehyde as a shell material. Coacervation technique and in situ polymerization were adopted in synthesizing microcapsules. In the microencapsulation by coacervation, tetradecane and octadecane were used as core materials. In the microencapsulation by situ polymerization tetradecane, pentadecane, hexadecane, heptadecane, octadecane, and nonadecane were used as core material. The synthesized microcapsule was examined to observe the shape of the microcapsule. The particle size analysis was performed by particle size analyzer. The thermal properties(e.g. melting point, heat of melting, crystallization temperature, heat of crystallization, differences between melting point and crystallization temperature) were obtained by DSC(Differential Scanning Calorimeter). The stirring rate effect was investigated during the microencapsulation. It was found that with increasing the stirring rate much smaller microcapule was produced. However, this did not necessarily lead to formation of spherical microcapsule.

• Mycobiology
• /
• v.49 no.3
• /
• pp.223-234
• /
• 2021

Itajahya rosea was found growing in association with Leucaena leucocephala plants at Savitribai Phule Pune University campus in India. The species identity was confirmed by phylogenetic analysis based on ITS and LSU regions of rDNA, wherein, our fugus was placed along with I. rosea in phylogenetic tree. It represents first record of I. rosea from India. Frequent visitation by Drosophila species on I. rosea fruiting body particularly on gleba was observed. The Drosophila got attracted to the detached gleba under the laboratory conditions and even sometimes, they prefer to sit over the gleba as compare to their food banana. It suggested that I. rosea gleba or pseudostipe produces some compounds for attraction and feeding behavior of Drosophila species. Therefore, we characterized the volatile attractants produced by gleba and pseudostipe of I. rosea by GC-MS analysis. Nineteen compounds were identified from gleba while nine compounds were recovered from the pseudostipe. Out of them, blends of three abundant odor producing volatile compounds were reported namely, Hexadecane, Pentadecane and Nonadecane, which are responsible for attraction of Drosophila toward the gleba. Three fatty acids namely 9,12-octadecadienoic acid (Z,Z), hexadecanoic acid and benzoic acid ethyl ester produced are served as an appetitive signal through olfactory response of Drosophila, so the flies were feed on the gleba. Two pheromones' compounds, heneicosane and (+)-(5S,9S)-5,9-dimethylpentadecane, were also reported in pseudostipe and gleba, respectively, which play a role in Drosophila for breeding. Our study highlights an intriguing chemical ecology of fungus-Drosophila interaction.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.6
• /
• pp.529-536
• /
• 1986

By modified method yellow corvenia(called $Y_3$) was prepared with $4\%$ salt, $4\%$ KCl, $6\%$ sorbitol, $0.5\%$ lactic acid and $4\%$ alcohol extract of red pepper to improve the quality of fermented sea food. In this study, changes of volatile compounds and fatty acid composition obtained from modified fermented yellow corvenia($Y_3$) were experimented during fermentation, comparing with conventional fermented yellow corvenia(called $Y_1,\;20\%$ of salt contents). Total lipid of yellow corvenia was composed of $78.1\%$ of neutral lipid, $21.2\%$ of phospholipid and $0.7\%$ of glycolipid. And monoeonoic acid was held $37.4\%$ of fatty acid composition of total lipid and saturated fatty acid ($34.8\%$), polyenoic acid ($27.7\%$) were followed. Saturated fatty acid($C_{14:0},\;C_{16:0},\;C_{18:0}$) in $Y_1,\;Y_3$ increased, polyenoic acid ($C_{22:6}\;C_{22:5}\;C_{20:5}$) decreased while monoenoic acid($C_{16:1}\;C_{18:1}$) in those was little fluctuated during fermentation. Thirty-three kinds of volatile component in whole volatile compounds obtained from $Y_1,\;Y_3$ at 90 days fermentation were identified, and composed of some hydrocarbons (8 kinds), alcohols (7 kinds), acids (6 kinds), aldehydes(4 kinds), sulfides(2 kinds), ketones (2 kinds), one of phenol and 3 kinds of the other components. Among the whole volatile compounds 2-ethoxy ethanol and was held $79.35\%$ in $Y_3$, whereas nonadecane was held $75.85\%$ in $Y_1$. During fermentation 8 kinds of volatile acids, 5 kinds of amines and 9 kinds of carbonyl compounds were also detected. Those volatile acid such as acetic acid, isovaleric acid, n-caproic acid, n-butyric acid were the major portion of total volatile acids in $Y_3$ at 90 days fermentation. Meanwhile, carbonyl compounds such as ethanal, 2-butanone and butanal were the major ones, while TMA held the most part of volatile amines in $Y_3$ during fermentation. From the result of sniff test, the components which are believed to contribute to the characteristic flavor of fermented product $Y_1,\;Y_3$ are deduced to be volatile acid, carbonyl compounds and amines in order. Conclusively, there was little difference in composition of volatile components, but merely a little difference in content of those between $Y_3$ and $Y_1$.

• Parasites, Hosts and Diseases
• /
• v.61 no.3
• /
• pp.282-291
• /
• 2023

Despite the recent progress in public health measures, malaria remains a troublesome disease that needs to be eradicated. It is essential to develop new antimalarial medications that are reliable and secure. This report evaluated the pharmacokinetics and antimalarial activity of 1,2,6,7-tetraoxaspiro[7.11]nonadecane (N-89) using the rodent malaria parasite Plasmodium berghei in vivo. After a single oral dose (75 mg /kg) of N-89, its pharmacokinetic parameters were measured, and t_1/2 was 0.97 h, T_max was 0.75 h, and bioavailability was 7.01%. A plasma concentration of 8.1 ng/ml of N-89 was maintained for 8 h but could not be detected at 10 h. The dose inhibiting 50% of parasite growth (ED₅₀) and ED₉₀ values of oral N-89 obtained following a 4-day suppressive test were 20 and 40 mg/kg, respectively. Based on the plasma concentration of N-89, we evaluated the antimalarial activity and cure effects of oral N-89 at a dose of 75 mg/kg 3 times daily for 3 consecutive days in mice harboring more than 0.5% parasitemia. In all the N-89-treated groups, the parasites were eliminated on day 5 post-treatment, and all mice recovered without a parasite recurrence for 30 days. Additionally, administering oral N-89 at a low dose of 50 mg/kg was sufficient to cure mice from day 6 without parasite recurrence. This work was the first to investigate the pharmacokinetic characteristics and antimalarial activity of N-89 as an oral drug. In the future, the following steps should be focused on developing N-89 for malaria treatments; its administration schedule and metabolic pathways should be investigated.