• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.91-91
• /
• 2013

Imagine a world where we could biomanufacture hybrid nanomaterials having atomic-scale resolution over functionality and architecture. Toward this vision, a fundamental challenge in materials science is how to design and synthesize protein-like material that can be fully self-assembled and exhibit information-specific process. In an ongoing effort to extend the fundamental understanding of protein structure to non-natural systems, we have designed a class of short peptides to fold like proteins and assemble into defined nanostructures. In this talk, I will talk about new strategies to drive the self-assembled structures designing sequence of peptide. I will also discuss about the specific interaction between proteins and inorganics that can be used for the development of new hybrid solar energy devices. Splitting water into hydrogen and oxygen is one of the promising pathways for solar to energy convertsion and storage system. The oxygen evolution reaction (OER) has been regarded as a major bottleneck in the overall water splitting process due to the slow transfer rate of four electrons and the high activation energy barrier for O-O bond formation. In nature, there is a water oxidation complex (WOC) in photosystem II (PSII) comprised of the earthabundant elements Mn and Ca. The WOC in photosystem II, in the form of a cubical CaMn4O5 cluster, efficiently catalyzes water oxidation under neutral conditions with extremely low overpotential (~160 mV) and a high TOF number. The cluster is stabilized by a surrounding redox-active peptide ligand, and undergo successive changes in oxidation state by PCET (proton-coupled electron transfer) reaction with the peptide ligand. It is fundamental challenge to achieve a level of structural complexity and functionality that rivals that seen in the cubane Mn4CaO5 cluster and surrounding peptide in nature. In this presentation, I will present a new strategy to mimic the natural photosystem. The approach is based on the atomically defined assembly based on the short redox-active peptide sequences. Additionally, I will show a newly identified manganese based compound that is very close to manganese clusters in photosystem II.

• Research in Plant Disease
• /
• v.27 no.1
• /
• pp.8-16
• /
• 2021

This study was conducted to check the sterilization efficacy of microwave plasma (MWP) against the watermelon seeds infected with Acidovorax citrulli 11-251. Watermelon seeds were artificially vacuum inoculated to produce A. citrulli 11-251 infected seeds. Aac ImmunoStrip and scanning electron microscope (SEM) results suggests that, seeds (coat and endosperm) were infected under the concentration of 1×107/30 min. MWP sterlization process was carried out at 50 W (3 min, 5 min, and 10 min), 80 W (3 min, 5 min, and 10 min), and 100 W (3 min, 5 min, and 10 min). According to the results, MWP sterilized the artificially inoculated seed coats by 95.96% at 80 W/10 min and seed endosperms by 100% at 100 W/10 min respectively. Although, seeds were sterlized by MWP, germination rate of seeds were low as compared to non treated (negative control) seeds. Moreover, cell membrane of A. citrulli 11-251 was damaged while observed in SEM after sterilized with MWP. Further studies regarding the appropriate sterilization condition by MWP against A. citrulli infected seeds for germination will be conducted in our next study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.909-914
• /
• 2013

CIGS is one of thin film solar cell and has been studied so much, because of the possibility of low price and high efficiency. Until now, co-evaporation and sputtering were typical method to prepare CIGS absorption layer, and a few company commercialized solar cell by these method. However, non-vacuum process which has been studied for long time has not been progressed, though the merit of low price. Especially, aerosol deposition method has not been reported, because it is difficult to prepare a large quantity of various CIGS powder. In this study, CIGS powder was synthesized by mechanochemical method and CIGS absorption layer was deposited by aerosol deposition method. The thickness of the CIGS layer was controlled by the number of deposition and the surface roughness of it was affected by the amount of flow gas. And, also, I-V curve of it appeared metallic property in the case of 'as deposition'. After heat treatment in Se-rich atmosphere, the electrical property of it changed to a semiconductor. CdS and transparent conduction layer were formed by a typical method on it for solar cell. The efficiency of cell was appeared 0.19%. Though the efficiency was low because of the disharmony in the after-process, it was conformed that CIGS solar cell could be prepared by aerosol deposition.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.4
• /
• pp.9-20
• /
• 2001

The objective of this study was to improve sanitary conditions at the beauty shops by informing the owners and employees to be aware of the public health. The data were obtained by the Physical investigation (August 1 to 30, 2001) of the sanitary Problems at 112 beauty shops in Daegu Metrpolitan area and by the surveys from the employees and customers. By analysis these data with SAS/PC+(ver. 6.12) and $x^2-test$, we have obtained the following results. 1. The numbers of the beauty shop workers (67.86% of the shops) were two including the owner, and only 18.75% of the workers had the regular public health training session. Even at the training sessions, no public health specialist was available as an instructor. 2. Sanitary conditions of the floor (92.76%), washer (88.93%) and rest room (74.11%) at the beauty shops were satisfactory. However, only 3.57% of the beauty shop used the vacuum cleaner that would be far more effective than the bloom to remove hairs from the floor. 3. About 91.07% (102 shops) did not or poorly sterilize equipments, and 91.76% (103 shops) did not store the sterilized or non-sterilized equipments separately. The shops that had the ultraviolet sterilizer that is required by the public health regulation were 53.57% (60 shops), and only 2.67% (3shops) actually used it. 4. About 82.14% (72 shops) used Oxyclean and detergent for washing the fabrics such as towels and gowns. About 11.61% (13 shops) used only detergent and 3.57% (4 shops) used the boiling sterilization method. No shop used the customer gown once per customer, and only 2.68% (3 shops) washed the used gown daily.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.253-258
• /
• 2003

Manual type manifold gauge has been used for charging the refrigerant in the refrigeration systems. In this case, the refrigerant is released to the ambient during the hose-switching period. :he objectives of this study are to develop a novel automatic refrigerant charging system, and to quantify the effect of the automatic systems on the reduction of the non-condensable gas and the contamination of the compressor oil. The automatic charging system makes the pressure test, vacuum test, and refrigerant charging work very simple and easy because the charging hose does not have to be switched many times. It is found that the amount of water in the SiO$_2$and the compressor oil reduces to l/4 times of that for the manual type manifold gauge and the refrigerant is not released to the ambient at all when the automatic charging system is adopted.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.483-488
• /
• 2013

Over the past few decades, high-nitrogen austenitic steels have steadily received greater attention since they provide a unique combination of high strength and ductility, good corrosion resistance, and non-magnetic properties. Recently, highnitrogen 18Mn-18Cr austenitic steels with enhanced strength have been developed and widely used for generator retaining rings in order to prevent the copper wiring from being displaced by the centrifugal forces occurring during high-speed rotation. The high-nitrogen austenitic steels for generator retaining ring should be expanded at room temperature and then stress relief annealed at around $400^{\circ}C$ to achieve the required mechanical properties. In this study, four kinds of high-nitrogen 18Mn-18Cr austenitic steels with different nitrogen content were fabricated by using a pressurized vacuum induction melting furnace, and then the effects of nitrogen content, cold working, and stress relieving on tensile properties were investigated. The yield and tensile strengths increased proportionally with increasing nitrogen content and cold working, and they further increased after stress relieving treatment. Based on these results, a semi-empirical equation was proposed to predict the tensile strength of highnitrogen 18Mn-18Cr austenitic steels for generator retaining rings. It will be a useful for the effective fabrication of high-nitrogen 18Mn-18Cr austenitic steels for generator retaining rings with the required tensile properties.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.346-349
• /
• 2007

치밀한 $CuInSe_{2}$ (CIS) 태양전지용 광흡수층을 제조하기 위해 상용되는 출발물질을 이용하여 비진공방식인 paste coating 법으로 CIS 막을 제조하였다. 먼저 치밀한 CIS 막 제조를 위해 $Cu_{2}Se$의 액상 거동을 관찰하였다. 이러한 $Cu_{2}Se_{2}$의 액상거동을 위해 Se 분위기에서 Se 증발온도, 기판온도, 열처리시간 등을 다양하게 변화 시켰으며, Se 증발온도 $450^{\circ}C$, 기판온도 $550^{\circ}C$, 열처리시간 30분 그리고 수송가스 ($N_{2}$)를 20 sccm으로 최적조건을 형성하였다. 이러한 최적조건을 바탕으로 치밀한 CIS막을 위해 two-zone RIP (rapid temperature process) 방법으로 Se 분위기 안에서 셀렌화를 위한 열처리를 행하였다. 셀렌화를 위해 다양한 열처리시간에 따라 형성된 CIS 막은 CIS 광흡수층과 Mo 박막 사이에서 $MoSe_{2}$ 층이 형성되었지만, 균일한 CIS 막을 얻었으며 업자성장과 치밀화 거동을 관찰 하였다. 또한, CIS 막의 치밀화를 위해 Se 증발온도와 열처리시간을 고정하고 기판온도를 $600^{\circ}C$로 증가시켜 $Cu_{2}Se$의 액상거동을 관찰하였다. $600^{\circ}C$에서 형성된 CIS 막은 기판온도 $500^{\circ}C$의 시편보다 입자성장과 치밀화가 되었으나 기판으로 사용하는 soda-lime glass의 휨 현상이 발생하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.238-245
• /
• 2007

$Eu^{3+}$ doped $YGdO_3$ phosphors particles which have fine size and narrow size distribution with non aggregated uniform morphology were prepared by solvent evaporation method for the improvement of emission efficiency. Several parameters have been investigated in this study such as the influences of composition ratio of host materials, calcination temperature, amount of activator, surfactant, pH and flux on the photoluminescence intensity, particle size and dispersion. $Eu^{3+}$ doped $YGdO_3$ phosphor presented a strong narrow band emission peak at 612nm. The maximum emission intensity of$YGdO_3:Eu^{3+}$ occurred when $Eu^{3+}$ concentration is 3wt% under vacuum ultra violet excitation. Prepared phosphors were found to have small round-shaped particles about 150nm in size. The addition of PVA as a surfactant inhibits the grain growth and the agglomeration of particles efficiently by reducing the oxygen bridge bonds. As the pH reduces, PL intensity increase due to reducing the formation of oxygen bridge bonds. The particles prepared from solvent evaporation method with 5wt% LiCl were found to have 120% PL intensity compare to particles prepared without LiCl flux.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.23-28
• /
• 2011

In this study, the ejector design was modeled using Fluent 6.3 of FVM(Finite Volume Method) CFD(Computational Fluid Dynamics) techniques to resolve the flow dynamics in the ejector. A vacuum system with the ejector has been widely used because of its simple construction and easy maintenance. Ejector is the main part of the desalination system, of which designs determine the efficiency of system. The effects of the ejector was investigated geometry and the operating conditions in the hydraulic characteristics. The ejector consists mainly of a nozzle, suction chamber, mixing tube (throat), diffuser and draft tube. Liquid is supplied to the ejector nozzle, the fast liquid jet produced by the nozzle entrains and the non condensable gas was sucked into the mixing tube. The multiphase CFD modeling was carried out to determine the hydrodynamic characteristics of seawater-air ejector. Condition of the simulation was varied in entrance mass flow rate (1kg/s, 1.5kg/s, 2kg/s, 2.5kg/s, 3kg/s), and position of driving nozzle was located from the central axis of the suction at -10mm, 0mm, 10mm, 20mm, 30mm.. Asaresult, suction flow velocity has the highest value in central axis of the suction.

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.169-175
• /
• 2020

Silicon nitride thin films are deposited by RF (13.57 MHz) magnetron sputtering process using a Si (99.999 %) target and with different ratios of Ar/N₂ sputtering gas mixture. Corning G type glass is used as substrate. The vacuum atmosphere, RF source power, deposit time and temperature of substrate of the sputtering process are maintained consistently at 2 ~ 3 × 10^-3 torr, 30 sccm, 100 watt, 20 min. and room temperature, respectively. Cross sectional views and surface morphology of the deposited thin films are observed by field emission scanning electron microscope, atomic force microscope and X-ray photoelectron spectroscopy. The hardness values are determined by nano-indentation measurement. The thickness of the deposited films is approximately within the range of 88 nm ~ 200 nm. As the amount of N₂ gas in the Ar:N₂ gas mixture increases, the thickness of the films decreases. AFM observation reveals that film deposited at high Ar:N₂ gas ratio and large amount of N₂ gas has a very irregular surface morphology, even though it has a low RMS value. The hardness value of the deposited films made with ratio of Ar:N₂=9:1 display the highest value. The XPS spectrum indicates that the deposited film is assigned to non-stoichiometric silicon nitride and the transmittance of the glass with deposited SiO₂-Si_xN_y thin film is satisfactory at 97 %.