• 한국공간정보시스템학회 논문지
• /
• 제9권2호
• /
• pp.81-91
• /
• 2007

본 논문에서는 공간 데이터 웨어하우스에서 시공간 분석지원을 위한 공간 데이터의 비중복 적재 기법을 제안한다. SDW는 이기종의 다양한 서비스를 지원하는 SDBMS로부터 공간 데이터를 추출한다. 제안 기법에서는 SOW에 소스로 참여하는 SDBMS에서 변경된 부분만을 추출하고, 이를 공간연산을 통해 중복된 데이터를 제거한 후 통합된 형태로 적재함으로써 빠른 공간 데이터 분석을 지원할 수 있으며, 저장 공간의 낭비를 줄일 수 있다. 이는 공간 마이닝등의 시간에 따른 분석 및 예측 분야에 효율적인 형태로 공간 데이터를 적재한다.

• 한국통신학회논문지
• /
• 제29권5A호
• /
• pp.574-582
• /
• 2004

본 논문에서는 패킷 데이터 서비스를 지원하는 DS/CDMA 시스템에서 역방향 링크의 대기 패킷 버스트들이 겪는 평균 전송 시간을 최소화하기 위한 여러 가지 패킷 스캐줄링 방식을 비교 분석하였다. 모든 활성화된 데이터 사용자들이 동시에 전송을 하는 경우의 최적의 스케줄링 방식에 대하여 논하고 기존의 여러 가지 다른 전송률 스케줄링 방식들과의 수학적인 비교 분석을 통하여 평균 전송 지연을 고려한 전송률 스케줄링 방식의 효율적인 지표를 제시하였다.

• 한국정보과학회논문지:데이타베이스
• /
• 제30권4호
• /
• pp.408-419
• /
• 2003

데이타웨어하우스는 의사결정시스템의 질의처리에 사용되는데, 통상적으로 의사결정질의의 응답 속도는 OLTP 질의 응답속도에 비해 수십 배 이상 오래 걸린다. 의사결정은 대부분 빠른 시간 안에 이루어지는 것이 필수적이므로 의사결정질의 응답 속도를 단축시키는 기술은 중요하다. 본 논문에서는 기존의 질의결과를 캐싱하여 주어진 질의처리에 이용하는 기법을 제시한다. 이를 위해 먼저 의사결정시스템이 이 기법에 적합한 환경을 가지고 있는지 살펴본다. 그 다음, 임의 형태의 모든 질의를 처리한다는 것은 불가능하므로 우리가 다루는 질의 형태인 정규화형태를 정의한다. 질의가 정규화형태를 따르지 않으면 단순 스트링 매칭을 하고, 정규화된 경우라면 질의스플릿이란 질의 변환 과정과 질의종속그래프를 통해 캐시된 질의결과를 찾은 후 그 결과 위에서 질의를 수행한다. 캐시 관리자는 질의응답시간을 최소화하도록 캐시를 유지해야한다. 이를 위해 질의 수행비용, 질의결과의 크기, 레퍼런스비율, 베이스 테이블의 업데이트비율 및 그에 따른 질의결과 유지비용 등을 고려하여 캐싱하는 동적 캐시효환기법을 제안한다. 제안된 기법은 실험을 통해 그 성능을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.101-102
• /
• 2010

This paper represents about the characteristics of wind turbine industry of the west-south seashore of Leading Industry Development for Honam Economic Region. These projects have 8 R&D and 3 non R&D project. The period of these projects is from October 2009 to April 2012. The R&D projects are composed three bright prospect products (1) the base construction of MW off-shore wind turbine components and system with Outer-rotor type PMSG, (2) the Development of 3MW wind power system with accommodation of the west-south seashore, and (3) the development of hybrid wind turbine system with wind base construction. Also, the non-R&D projects are composed three parts with above three bright prospect products. Above two projects support the companies with characteristic of low speed wind turbine system. Other project supports the companies related to wind turbine with small and medium capacity of form 3 kW to 10kW.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1604-1618
• /
• 1995

In the process of mechanical assembly design, assembly modeling systems have been used mainly for the design verification before manufacturing by enabling to check the interference and/ or the dynamic and kinematic performance. However, the conventional assembly modeling systems have a shortcoming that they can not be used in the initial design stage but can be used only after the design is fully completed. In other words conventional assembly modeling systems provide bottom-up modeling which means that the detailed modeling of components must precede the definition of relationships between them. To resolve this problem, an assembly modeling system is proposed to provide a top-down modeling environment in which components and assembly can be modeled simultaneously. To this end, an assembly data structure suitable for top-down assembly modeling has been established. Feature positioning Module(FPM) using geometric constraints has been also developed. The Sekective Solving Method proposed for FPM is based on the priority between the constraint equations and enables the designer's intent expressed by geometric constraints to be maintained throughout the whole modeling process. Finally, the feature based modeling technique using two-level features has been developed. Two-level features include an abstract model and a detailed model in a merged form in non-manifold data frame.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권7호
• /
• pp.139-150
• /
• 2021

The financial system is a relatively important sector in the economy of a country. Its role in providing access to financial services to people is able to support a better economy. The main problem in this financial system is caused by the barriers that prevent individuals or companies from accessing these financial services. This study aims to empirically analyze the relationship financial inclusion and financial system stability in ASEAN 4 (Indonesia, Malaysia, Thailand, and The Philippines). Financial inclusion proxied by the financial inclusion through credit variable and other banking variables such as the number of financial services access, banking asset, and financial system stabilization is seen from banking performance through non-performing loan and Z score instruments. Empirically, the study uses panel data in the form of annual data for 2005-2016. The method used Panel VAR. The result shows that financial inclusion affects the stability of the financial system in ASEAN 4. This indicates that financial development through financial inclusion can encourage stability of the financial system in ASEAN 4. In this globalization era, the integrated financial system is increasing, this research shows the importance of developing financial inclusion by eliminating barriers to financial exclusion.

• Structural Engineering and Mechanics
• /
• 제35권6호
• /
• pp.677-697
• /
• 2010

This paper focuses on geometrically non-linear static analysis of a simply supported beam made of hyperelastic material subjected to a non-follower transversal uniformly distributed load. As it is known, the line of action of follower forces is affected by the deformation of the elastic system on which they act and therefore such forces are non-conservative. The material of the beam is assumed as isotropic and hyperelastic. Two types of simply supported beams are considered which have the following boundary conditions: 1) There is a pin at left end and a roller at right end of the beam (pinned-rolled beam). 2) Both ends of the beam are supported by pins (pinned-pinned beam). In this study, finite element model of the beam is constructed by using total Lagrangian finite element model of two dimensional continuum for a twelve-node quadratic element. The considered highly non-linear problem is solved by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. In order to use the solution procedures of Newton-Raphson type, there is need to linearized equilibrium equations, which can be achieved through the linearization of the principle of virtual work in its continuum form. In the study, the effect of the large deflections and rotations on the displacements and the normal stress and the shear stress distributions through the thickness of the beam is investigated in detail. It is known that in the failure analysis, the most important quantities are the principal normal stresses and the maximum shear stress. Therefore these stresses are investigated in detail. The convergence studies are performed for various numbers of finite elements. The effects of the geometric non-linearity and pinned-pinned and pinned-rolled support conditions on the displacements and on the stresses are investigated. By using a twelve-node quadratic element, the free boundary conditions are satisfied and very good stress diagrams are obtained. Also, some of the results of the total Lagrangian finite element model of two dimensional continuum for a twelve-node quadratic element are compared with the results of SAP2000 packet program. Numerical results show that geometrical nonlinearity plays very important role in the static responses of the beam.

• 한국경영과학회지
• /
• 제20권1호
• /
• pp.11-26
• /
• 1995

We have used various information technologies (IT) in group decision-making for increasing effectiveness and satisfaction of group decision-making process. Recently, a new form of IT so called Group Decision supprot System (GDSS) was introduced into group decision-making process. Previous experimental studies about effectiveness of GDSSS have been inconsistent and the results were mixed. There was no empirical studies about GDSS in Korea. In this study, we divide two groups-GDSS supported group and traditional face-to-face group and investigate impacts of GDSS on group decision-making processes and outcomes. An idea generation task for operational action plan development, implementing GEO's strategic vision, served as the decision-making context. Supported GDSS is GroupSystems V, which had been developed by Univ. of Arizona. It was translated by Korean. According to the results, Number of nonredundant ideas in GDSS group is two or three times more than Non-GDSS grop. GDSS group feel more equal status, have better interpersonal relationship, have more confidence on group decision than Non-GDSS group. But satisfaction of participants on decision-making process and outcome has not showed a significant difference between two groups. Because all of participants in GDSS group were novice to GDSS. With this results we suggest further studies on transforming western type GDSS to Korean decision-making culture. It will be cornerstone for development of GDSS in Korean desision-making culture. It will be cornerstone for devlopment of GDSS in Korean decsion making culture environment.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.38-45
• /
• 2017

As the competitiveness of SMEs (small and medium enterprises) is getting more and more improved and globalized, the government provides various consulting services to secure the competitiveness of small and medium firms and support stable growth. However, the assessment of the result from the government's support is generally focused on non-financial factors, such as customer satisfaction and analysis of improvement effect. This paper is in regards to the statistical analysis of how much the government's support in the form of providing consulting services contributes to financial outcomes in terms of profitability and growth. ROA (return on asset) and ROS (return on sales), which are investment profitability and sales profitability respectively, are chosen as an indicator of profitability. For analysis of growth, sales revenue and total asset growth are used. The samples are 44 corporations which are supported by government, and 150 corporations which are selected for comparison, with corporate growth support center program by the Ministry of Trade, Industry, and Energy chosen as the consulting model. After gathering the yearly balance sheets and income statements of the samples from CRETOP, Korea Enterprise Data, the analysis is conducted in the way of identifying the statistical significance of financial difference in the same period between corporates taking consulting services and corporates which have not, and the difference of financial outcomes from the corporates taking consulting services before and after consulting services. As a result, in terms of business growth, it is turned out to have positive difference both in growth ratio and profitability compared to the compared corporations at the significant level. Therefore, it is obvious that the consulting program which government provides to SMEs have direct influence practically to the corporates' management performance.

• 한국지리정보학회지
• /
• 제6권4호
• /
• pp.71-84
• /
• 2003

본 연구에서는 통합된 하나의 맵을 작성하기 위하여 통합 맵서버를 설계하고 구현한다. 제안된 통합 맵서버는 다음과 같은 두 가지 특징을 가진다. 첫째, 웹 환경에서 사용자의 요구를 반영하기 위하여 메타데이터를 개별화한다. 맵서버는 클라이언트에 필요한 정보를 메타데이터에 설정하기 때문에 메타데이터를 개별화하면 사용자는 자신이 원하는 형태의 통합 데이터를 얻을 수 있게 된다. 둘째, 융합 서비스 개념을 도입하여 공간 데이터 뿐만 아니라 공간 데이터와 비공간 데이터와의 통합도 지원한다. 융합 서비스는 링킹의 개념을 사용하여 실체화한다. 본 연구에서 제안한 통합맵서버는 사용자의 요구에 따른 높은 수준의 맵 통합 결과를 제공함으로써 웹 매핑 환경에서 융합의 질을 높일 수 있으며, 사용자 응답 시간도 줄일 수 있다는 것을 실험을 통하여 증명하였다.