• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.3
• /
• pp.97-100
• /
• 2008

Polar and non-polar GaN was grown by the HVPE on various substrates and influence of polarity has been investigated. The $10\;{\mu}m$ thickness GaN were grown by HVPE is along A-plane ($11{\bar{2}}0$), C-plane (0001) and M-Plane ($10{\bar{1}}0$) sapphire substrate respectively. Surface properties were observed by optical microscope and atomic force microscopy. High resolution X-ray diffraction (HR-XRD) confirms the wurtzite structure. The donor band exciton peak located at ${\sim}3.4\;eV$ and also located yellow luminescence peak at 2.2 eV. The polarity of the GaN film has a strong influence on the morphology and the optical properties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.229-229
• /
• 2010

We report a high crystalline nonpolar a-plane (11-20) GaN on r-plane (1-102) sapphire substrates with $+0.15^{\circ}$, $-0.15^{\circ}$, $+0.2^{\circ}$, $-0.2^{\circ}$ and $+0.4^{\circ}$ misoriented by metalorganic chemical-vapor deposition (MOCVD). The multi-quantum wells (MQWs) active region is consists of 5 periods the nonpolar a-plane InGaN/GaN (a-InGaN/GaN) on a high quality a-plane GaN (a-GaN) template grown by using the multibuffer layer technique. The full widths at half maximum (FWHMs) of x-ray rocking curve (XRC) obtained from phiscan of the specimen that was grown up to nonpolar a-plane GaN layers with double crystal x-ray diffraction. The FWHM values of $+0.4^{\circ}$ misoriented sapphire substrate were decreased down to 426 arc sec for $0^{\circ}$ and 531 arc sec for $-90^{\circ}$, respectively. Also, the samples were characterized by photoluminescence (PL).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.555-561
• /
• 2000

The remote field eddy current (RFEC) inspection was performed on the ductile cast iron pipes with nominal outer diameter of 100mm, which were machined with various shapes and sizes of defects. Ductile cast iron pipes which are used as water supply pipe have the non-uniform thickness and asymmetric cross section due to relatively high degree of allowable errors during the manufacturing processes. These characteristics of ductile cast in pipes cause the long range background noises in RFEC signals along the pipe. In this study, tile machined defects in pipes were effectively classified by the moving window average (MWA) method which eliminated the long-range noise. The voltage plane polar plots (VPPP) method was used to quantitatively evaluate the depth and circumferential degree of defects. The VPPP signatures showed that the angle between defect signature and the normalized in-phase component on the VPPP is linear to the depth of defects. The nondestructive RFEC technique proved to be capable of quantitatively evaluating the machined defects of underground water supply pipe.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.7
• /
• pp.414-420
• /
• 2004

Among the desirable properties of a piecewise linear parameterization, guaranteeing a one-to-one mapping (i.e., no triangle flips in the parameter plane) is often sought. A one-to-one mapping is accomplished by non-negative coefficients in the affine transformation. In the Floater's method, the coefficients were computed after the 3D mesh was flattened by geodesic polar-mapping. But using this geodesic polar map introduces unnecessary local distortion. In this paper, a simple variant of the original shape-preserving mapping technique by Floater is introduced. A new simple method for calculating barycentric coordinates by using straightest geodesics is proposed. With this method, the non-negative coefficients are computed directly on the mesh, reducing the shape distortion introduced by the previously-used polar mapping. The parameterization is then found by solving a sparse linear system, and it provides a simple and visually-smooth piecewise linear mapping, without foldovers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.141-141
• /
• 2009

Blue light-emitting diodes (LEDs), violet laser diodes 같은 광전소자들은 질화물 c-plane 기판위에 소자로 응용되어 이미 상품화 되어 왔다. 그러나 2족-질화물 재료들은 wurtzite 구조를 가지므로 c-plane에 평행한 자연적인 극성을 띌 뿐만 아니라 결정 내부 stress로 인한 압전현상 또한 나타나 큰 내부 전기장을 형성하게 된다. 이렇게 생성된 내부 전기장은 전자와 홀의 재결합 효율을 감소시키고 소자 응용 시 red-shift의 원인이 되곤 한다. 따라서 최근 들어 m-plane(1-100), a-plane (11-20)같은 무극성을 뛰는 기판 위에 소자를 만드는 방법이 각광을 받고 있는 추세다. 그러나 무극성 기판을 소자에 응용 시 Chemical Mechanical Planarization (CMP)에 의한 가공은 반도체 기판으로써 이용하기 위한 필수 불가결의 공정이다. c면(0001) SiC wafer에 대한 연구는 현재 많이 발표가 되어 있으나 무극성면 SiC wafer에 대한 CMP 공정에 대한 연구사례는 없는 실정이다. 본 연구에서는 C면 (0001)으로 성장된 잉곳을 a면(11-20)과 m(1-100)면으로 절단 후, slurry type (KOH-based colloidal silica slurry, NaOCl), 산화제, 연마제등을 변화하여 CMP 공정을 거침으로서 일어나는 기계 화학적 가공 양상에 대하여 알아보았다. 그 후 표면 형상 분석 하기위해 Atomic Force Microscope(AFM)을 사용하였고, 표면 스크레치를 SEM을 이용해서 알아보았다.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.491-498
• /
• 2004

An analysis of the plane Couette flow between two parallel plates of a viscous, incompressible, micropolar fluid is presented. Especially, the effects of non-zero values of the micro-gyration boundary condition coefficient and pressure gradient on the flow fields are studied. Numerical results show that the micro polar parameter was found to have much more of an impact on the flow behaviors. It is also observed that the micro-gyration boundary condition coefficient influenced on the coefficients of skin friction and couple stress due to its different effect on the surface stress.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.146-146
• /
• 2011

The blue light emitting diode (LED) structure based on non-polar a-plane (11-20) GaN which was coated TiO2 nanoparticles using spin coating method was grown on r-plane (1-102) sapphire substrates to improve light extraction efficiency. We report on the emission and structural properties with temperature dependence of photoluminescence (PL) and x-ray rocking curves (XRC). From PL results at 13 K of undoped GaN samples, basal plane stacking fault (BSF) and near band edge (NBE) emission peak were observed at 3.434 eV and 3.484 eV, respectively. We also found the temperature-induced band-gap shrinkage, which was fitted well with empirical Varshini's equation. The PL intensity of TiO2 nanoparticles ?coated multiple quantum well (MQW) sample is decayed slower than that of no coating sample with increasing temperature. The anisotrophic strain and azimuth angle dependence in the films were shown from XRC results. The full width at half maximum (FWHM) along the GaN [11-20] and [1-100] directions were 564.9 arcsec and 490.8 arcsec, respectively. A small deviation of FWHM values at in-plane direction is attributed to uniform in-plane strain.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.215-223
• /
• 2008

The differential equations governing free vibrations of the elastic arches with hollow section are derived in polar coordinates, in which the effect of rotatory inertia is included. Natural frequencies is computed numerically for parabolic arches with both clamped ends and both hinged ends. Comparisons of natural frequencies between this study and reference are made to validate theories and numerical methods developed herein. The lowest four natural frequency parameters are reported, with the rotatory inertia, as functions of three non-dimensional system parameters: the breadth ratio, the thickness ratio and the rise to span length ratio.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.1-5
• /
• 2016

We investigated the half-metallicity and magnetism at the (001) and (110) surfaces of CsSe in cesium chloride and zinc-blende structures by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. From the calculated local density of states, we found that all the surfaces preserve the half-metallicity of the bulk structures. The surfaces with a greater polarity have stronger ferromagnetic properties when terminated with Se atoms; the non-polar surfaces do not change their electronic or magnetic properties considerably as compared with the bulk structures.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2015

We investigated the half-metallicity and magnetism at the (001) and (110) surfaces of YC in zinc-blende structure by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. From the calculated local density of states, we found that neither (001) nor (110) surface preserves the half-metallicity. While the magnetic moment of Y atom in the YC bulk is $0.116{\mu}_B$, it is $0.057{\mu}_B$ at the topmost layer of Y-terminated (001) surface. On the contrary, C-terminated (001) YC surface exhibits stronger magnetism than the bulk structure; the calculated magnetic moment on topmost C atom is $1.084{\mu}_B$, while that of C atom in the bulk structure is $0.423{\mu}_B$. The magnetic properties of the non-polar (110) YC surface are slightly enhanced as compared with the bulk structure.