• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1285-1286
• /
• 2005

• Smart Structures and Systems
• /
• 제30권1호
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.346.1-346
• /
• 2002

There have been many studies to visualize the vibration and noise of rotary compressor. Most of these studies assumed that the signal is stationary and the time-averaged signal is used for visualization. However, the noise and vibration signals generated during one cycle of crank shaft vary continuously. In this paper, the noise and vibration of rotary compressor which vary continuously are visualized by short time fourier transform method. (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.502-507
• /
• 2003

Toward the development of practical methods for observed data oriented bispectral estimation, an automatic means for determining the smoothing bandwidth of bispectral windows is proposed, that can also provide an associated optimum bispectral estimate of stationary non-Gaussian signals, systematically only from an observed time series datum of finite length. For the conventional non-parametric bispectral estimation, the MSE (mean squared error) of the normalized estimate is reviewed under a certain mixing condition and sufficient data length, mainly from the viewpoint of the inverse relation between its bias and variance with respect to the smoothing bandwidth. Based on the fundamental relation, a systematic method not only for determining the bandwidth, but also for obtaining the optimum bispectral estimate is presented by newly introducing a MSE evaluation index of the estimate only from an observed time series datum of finite length. The effectiveness and fundamental features of the proposed method are illustrated by the basic results of numerical experiments.

• 한국정보통신학회논문지
• /
• 제20권9호
• /
• pp.1673-1678
• /
• 2016

음성인식처리 분야에서 배경잡음으로 인하여 음성입력이 배경잡음으로 잘못 판단되는 원인이 되어 음성인식율의 저하를 초래한다. 이러한 종류의 잡음대책은 단순하지 않으므로 보다 고도한 잡음처리기술이 필요하게 된다. 따라서 본 논문에서는 잡음환경 중에서 정상적인 배경잡음 혹은 비정상적인 배경잡음과 지속 시간이 짧은 음성을 구별하는 알고리즘에 대하여 기술한다. 본 알고리즘은 다른 종류의 잡음과 음성을 구별하는 중요한 수단으로서 개량된 음성의 특징파리미터를 사용한다. 다음으로 다층퍼셉트론 네트워크에 의하여 잡음의 종류를 추정하는 알고리즘에 대해서 기술한다. 본 실험에서는 잡음과 음성이 구별이 가능하도록 실험적으로 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1454-1462
• /
• 2008

This paper is focused on the analysis of the noise and vibration measured near the wheelset of the high-speed trains using a time-varying frequency transform as a preliminary research of running monitoring. Due to the non-stationary characteristics, it is necessary to examine noise and vibration of the train with time-varying frequency transforms. In this paper, the short-time Fourier transform method is utilized - the stored data is localized by modulating with a window function, and Fourier transform is taken to each localized data. For the examination, the non-stationary noise and vibration of the high-speed train's wheelset are measured by using some microphones and accelerometers, and those signals are stored in a on-board data acquisition system. The non-stationary random signal analyses with the short-time Fourier transform are performed, and the result are classified as follows; auto-spectral density, cross-spectral density, frequency response, and coherence functions. From those functions, it is possible to observe the frequency characteristics of sleepers, switchers, tunnels, and steel bridges. Also, some distinct peaks, which are not dependent upon the train's speed, are identified from the results.

• 한국음향학회지
• /
• 제32권5호
• /
• pp.408-414
• /
• 2013

능동소음제어에서 널리 사용되는 FxLMS 알고리즘은 비정상 잡음환경에서 불안정하게 동작하는 경우가 있다. 이와 같은 문제를 해결하기 위하여, Sun과 Akhtar는 FxLMS 알고리즘의 갱신 과정에서 기준신호를 수정하는 방법을 제안하였다. 그러나 이들의 방법은 임펄스 노이즈가 발생할 경우 만족스러운 안정성을 보여주지 못하였다. 본 논문에서 제안된 알고리즘은 확률추정과 영교차율을 이용하여 능동소음제어의 안정성과 성능을 개선하였다. 또한 최적의 파라미터 선정을 위하여 퍼지 추론을 사용하였다. 제안된 방법의 실험결과 비정상 잡음환경에서 기존의 방법에 비하여 우수한 안정성과 빠른 수렴속도를 보여줬다.

• 한국멀티미디어학회논문지
• /
• 제12권1호
• /
• pp.26-30
• /
• 2009

본 논문에서는 로버스트 통계학의 순위 추정을 기반으로 하고 순서통계학의 L-추정자를 이용한 적응 순환 최소 순위(RLR) L-필터를 제안한다. 제안한 RLR-L 필터는 비선형 적응알고리즘을 가진 비선형 적응 필터로서 오차의 분산측정을 최소화하는 관점의 최적 필터로 가변적인 스텝 크기를 가지며 적응한다. 제안한 필터는 영상신호와 같은 비정체 신호나 가우시안 잡음 또는 임펄스 잡음과 같은 비선형 채널에 적합하다.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1172-1183
• /
• 2012

Aure's tonality was considered as the sound metrics for the expression of the tonality of gear whine sound in a previous research. It was failed to use the Aure's tonality as a sound metric for the tonal impression. Thus Aures's tonality, was developed for tonal impression in previous research. However, this metric did not express well the tonality of gear whine sound since the whine sound is a non-stationary signal with frequency modulation and amplitude modulation. In this study, the new method for the tonality evaluation for a non-stationary signal is presented. It is developed based on the prominence ratio, tonality impression function, and lower threshold level. It improves the accuracy and reliability of the sound quality index being used for the sound quality evaluation of the axle-gear whine sound.

• 경영과학
• /
• 제24권2호
• /
• pp.57-72
• /
• 2007

Many Applications of scientific research have coupled with functional data signal clustering techniques to discover novel characteristics that can be used for the diagnoses of several issues. In this article we present an interpretable multi-scale cluster hierarchy framework for clustering functional data using its multi-aspect frequency information. The suggested method focuses on how to effectively select transformed features/variables in unsupervised manner so that finally reduce the data dimension and achieve the multi-purposed clustering. Specially, we apply our suggested method to mutual fund returns and make superior-performing funds group based on different aspects such as global patterns, seasonal variations, levels of noise, and their combinations. To promise our method producing a quality cluster hierarchy, we give some empirical results under the simulation study and a set of real life data. This research will contribute to financial market analysis and flexibly fit to other research fields with clustering purposes.