• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• 소음진동
• /
• 제7권1호
• /
• pp.61-69
• /
• 1997

Despite of the development in the finite element method, it is difficult to get the finite element model describing the dynamic characteristics of the complex structure exactly. Therefore a number of different methods have been developed in order to update the finite element model of a structure using vibration test data. This paper outlines the basic formulation for the frequency response function based updating method. One important advantage of this method is that the intermediate step of performing an eigensolution extraction is unnecessary. Using simulated experimental data, studies are conducted in the case of 10 DOF discrete system. The solution of noisy and incomplete experimental data is discussed. True measured frequency response function data are used for updating the finite element model of a beam and a plate. Its applicability to the joint identification is also considered.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1334-1337
• /
• 2006

System identification is the field of modeling dynamic systems from experimental data. As a modeling technique, we can mention finite element method (FEM). In addition, we are able to measure modal data as the experimental data. The system can be generally categorized into a gray box and black box. In the gray box, we know mathematical model of a system, but we don't know structural parameters exactly, so we need to estimate structural parameters. In the black box, we don't know a system completely, so we need to identify system from nothing. To date, various system identification methods have been developed. Among them, we introduce system realization theory which uses Hankel matrix and Eigensystem Realization Algorithm (ERA) that enable us to identify modal parameters from noisy measurement data. Although we obtain noise-free data, however, we are likely to face difficulties in identifying a structure with hidden modes. Hidden modes can be occurred when the input or output position comes to a nodal point. If we change a system using a mode decoupling controller, the hidden modes can be revealed. Because we know the perturbation quantities in a closed loop system with the controller, we can realize an original system by subtracting perturbation quantities from the closed loop system. In this paper, we propose a novel method to identify a structure with hidden modes using the mode decoupling controller and the associated example is given for illustration.

• Smart Structures and Systems
• /
• 제21권1호
• /
• pp.1-14
• /
• 2018

A method is proposed to detect structural damages in the presence of damping using noisy data. This method uses Frequency Response Function (FRF) and Mode-Shapes as the input parameters for a system of Couple Sparse Coding (CSC) to study the healthy state of the structure. To obtain appropriate patterns of FRF for CSC training, Principal Component Analysis (PCA) technique is adopted to reduce the full-size FRF to overcome over-fitting and convergence problems in machine-learning training. To verify the proposed method, a numerical two-story frame structure is employed. A system of individual CSCs is trained with FRFs and mode-shapes, and then termed ensemble to detect the health condition of the structure. The results demonstrate that the proposed method is accurate in damage identification even in presence of up to 20% noisy data and 5% unconsidered damping ratio. Furthermore, it can be concluded that CSC ensemble is highly efficient to detect the location and the severity of damages in comparison to the individual CSC trained only with FRF data.

• 한국강구조학회 논문집
• /
• 제13권5호
• /
• pp.525-533
• /
• 2001

교량의 내풍 안전성을 평가하기 위해서는 플러터 계수(Flutter Derivatives)의 안정적 추정이 필요하다. 본 논문에서는 풍동실험에서 얻어지는 시간영역에서의 데이터중 변위 시계열데이터를 이용해서 플러터 계수를 구하는 동특성 계수 측정기법 2가지를 검토하였다. 검토된 MITD(Modified Ibrahim Time Domain) 방법과 AKF(Adaptive Kalman Filtering) 방법은 2차원단면모형 실험으로부터 동시에 8개의 플러터 계수를 산출할 수 있는 유용한 방법이다. 제안된 방법의 실제상황에서의 적용성을 검토하기 위해서 Bandlimited Gausian white noise을 가상의 데이터에 첨가하여 수학적 시뮬레이션으로 잡음에 대한 안정성을 검증해 보았다. 그 결과 교량의 플러터 해석에서는 본 연구에서 검증된 MITD 방법을 통한 플러터 계수의 산출이 추전된다.

• Structural Monitoring and Maintenance
• /
• 제3권3호
• /
• pp.195-214
• /
• 2016

Monitoring of impact loads is a very important technique in the field of structural health monitoring (SHM). However, in most cases it is not possible to measure impact events directly, so they need to be reconstructed. Impact load reconstruction refers to the problem of estimating an input to a dynamic system when the system output and the impulse response function are usually known. Generally this leads to a so called ill-posed inverse problem. It is reasonable to use prior knowledge of the force in order to develop more suitable reconstruction strategies and to increase accuracy. An impact event is characterized by a short time duration and a spatial concentration. Moreover the force time history of an impact has a specific shape, which also can be taken into account. In this contribution these properties of the external force are employed to create a sample-force-dictionary and thus to transform the ill-posed problem into a sparse recovery task. The sparse solution is acquired by solving a minimization problem known as basis pursuit denoising (BPDN). The reconstruction approach shown here is capable to estimate simultaneously the magnitude of the impact and the impact location, with a minimum number of accelerometers. The possibility of reconstructing the impact based on a noisy output signal is first demonstrated with simulated measurements of a simple beam structure. Then an experimental investigation of a real beam is performed.

• 한국음향학회지
• /
• 제33권3호
• /
• pp.210-215
• /
• 2014

오디오 핑거프린팅 기술은 잡음과 에코 등으로 인한 왜곡에도 성공적으로 음원을 식별해야한다. 이러한 오디오 핑거프린팅 기술을 TV광고식별에 적용하고자 한다. 본 논문은 TV 광고 식별을 위한 강인한 오디오 핑거프린팅 방식을 제안한다. 제안된 방법에서 사용되는 Constant Q 변환 기반에서 추출된 현저한 오디오 피크 쌍 핑거프린트는 실제 다양한 잡음환경에서 오디오 핑거프린팅 시스템의 정확도를 향상시키고, 낮은 복잡도를 가진다. 실험결과는 제안된 방식이 기존의 오디오 핑거프린팅 방식에 비해 다양한 잡음환경에서도 안정적이며 신뢰할 수 있는 검색 정확도를 제공함을 보여준다.

• 전기의세계
• /
• 제22권3호
• /
• pp.49-62
• /
• 1973

An algorithm for the state estimation and identification of multivariable nonlinear systems with noisy nonlinear observation has been investigated on the basis of the multidimensional Hermitian expansion for the a posteriori probability densities of the predicted observation, the predicted state and the observation conditioned by the state. A new approach for construction of this sequential nonlinear estimator, retaining up to the second order term of the observation error, has been developed, along with the approximation of nonlinear system functions, truncating at the second term. The estimation of the unknown parameters has been established by extending the state estimation technique, regarding the parameters as another state variables. The results of investigation indicate the feasibility of the schemes presented in this paper.

• 한국멀티미디어학회논문지
• /
• 제13권10호
• /
• pp.1494-1505
• /
• 2010

하나의 프레스로 여러 종류의 부품을 소량으로 생산하는 중 소형 공장에서는 부품 생산 과정에 발생하는 소리가 다양하게 나타난다. 이에 우리는 제품의 생산 순간의 소리를 인식하여 제품의 양 불량을 판별하는 시스템을 계층형 시간적 메모리(HTM Hierarchical Temporal Memory) 기술을 이용하여 개발하였다. HTM 이론은 인간 두뇌의 신피질(neocortex)의 동작 원리를 컴퓨터에 접목시킨 이론이다. 이는 실세계에 대한 시공간적인 패턴을 계층적으로 기억하는 것으로 기존의 인식 기술보다 여러 경우에 인식률이 뛰어난 것으로 알려져 있다. 우리는 이 HTM 기술을 소리 인식에 적용하여 부품에 대한 양 불량 판별 시스템을 개발하였다. 개발 결과를 검증하기 위해 실제 공장에서 부품 생산 순간의 다양한 소리들을 녹음하고, 소리 HTM 네트워크를 구성한 후, 학습과 훈련을 반복하여 해당 부품의 불량여부를 판정하도록 하였다. 그 결과 잡음이 많은 생산 현장에서도 판정의 정확도가 높은 것으로 확인하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2007년도 춘계학술대회 학술발표 논문집 제17권 제1호
• /
• pp.397-400
• /
• 2007

In this paper, we discuss the user-customized interaction for intelligent home environments. The interactive system is based upon the integrated techniques using both speech and face recognition. For essential modules, the speech recognition and synthesis were basically used for a virtual interaction between user and proposed system. In experiments, particularly, the real-time speech recognizer based on the HM-Net(Hidden Markov Network) was incorporated into the integrated system. Besides, the face identification was adopted to customize home environments for a specific user. In evaluation, the results showed that the proposed system was easy to use for intelligent home environments, even though the performance of the speech recognizer did not show a satisfactory results owing to the noisy environments.