• 한국안전학회지
• /
• 제30권2호
• /
• pp.63-69
• /
• 2015

Recoilless weapons, which lead strong back blast and impulse noise more than 160 dB, have been used in compliance with the regulation of the safety zone for the safe operations. However, the safety zone regulations for the newly developed weapons should be prepared since the existing guidelines do not provide any information concerning the reason for the safety zone. In this study, the outdoor launch tests were performed to collect the data such as noise, pressure and temperature of the back blast. An assessment method using data obtained from launch tests has been proposed to determine the safety zone. The safety zone has been determined with consideration for the following criteria: Impulse noise, temperature and pressure of the back blast and blast angle. As a results, new safety zones for them have been established for the recoilless weapon developed by ADD (Agency for Defense Development). We expect that this research can be used as a guideline for establishing a new safety zone regulation of similar weapon to be developed.

• 설비공학논문집
• /
• 제21권10호
• /
• pp.537-544
• /
• 2009

On account of the technological development, intelligent building is on increasing where the artificial regulation on indoor environment is possible, thence the concern about those facilities such as water-supply facility, water-heater and drainage facility has becomes higher. However, due to diversification and complicated system of the facility-equipments, the noise generating from such facility equipment is gradually becoming a problem, and since especially equipment noises arising at the machine room frequently infringe into the resident's pleasant living environment with the complex types of an air-borne sound and a structure-borne sound, it is becoming the civil complaint. On such viewpoint, this Study ever observed the characteristics of noise generating from various facility-equipments in the building, and intended to evaluate the facility-noises by use of the valuation index such as PSIL, N, NC, NR. As result of, the facilities noise which happens in the machine room makes normal conversation very difficult due to high sound pressure level. Based on such data, this study is willing to present it as an essential material for establishment an efficient measure against the facility-noises arising at machine room hereafter.

• 한국항공우주학회지
• /
• 제44권5호
• /
• pp.407-415
• /
• 2016

본 논문에서는 최적의 항공 영상 융합을 위하여 적응 가이디드 필터 기반 알고리즘을 제안하였다. 제안한 적응 가이디드 필터는 가이디드 필터 설계 요소 중에서 정규화 파라미터 값을 입력된 영상 특성에 따라서 조절하고 PSNR (peak signal to noise ratio)을 미리 정해둔 값으로 유지한다. 제안한 방법은 입력 영상의 특성에 관계없이 미리 정한 PSNR을 유지하는 범위 내에서 잡음을 제거하므로 최적의 영상 융합 성능의 결과를 가져올 수 있다. 필터 성능은 시뮬레이션을 통해 검증하였고, 기존에 많이 사용되고 있는 영상융합 품질 파라미터를 이용하여 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1344-1349
• /
• 2000

With rapidly industrial development, a railway has become of a main traffic means. But, the railway noise has caused much annoyance for the residents living nearby railway tracks. Therefore, in our country, for established of Quite dwelling environment, execute regulation standard of railway noise from January 1, 2000. Efficiency soundproofing measures, however, are very difficult because of the lack of basic data and insufficiency of the existing research. In this point, this study attempts to survey the characteristics of attenuation and propagation of railway noise in by existence of noise barrier. And this study intends to get the basic data for establishment of a standard about railway noise.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1475-1482
• /
• 2001

Nowadays reduction of gear noise in power transmission is very important, because the noise regulation is severe and demand of customer on noise is increased. To reduce gear noise, it is necessary to understand the noise characteristics of helical gear. In this work, we designed test rig for the study of gear noise and installed in semi-anechoic chamber. By using this rig, sound pressure level is measured under varying rotational speed and torque. The frequency characteristics of helical gear noise on the effect of lead errors and torque are discussed.

• 대한전자공학회논문지SD
• /
• 제46권6호
• /
• pp.52-57
• /
• 2009

본 논문은 CMOS RFIC 단일 칩을 위한 Bandgap Voltage Reference와 이를 포함한 저 잡음 Low Dropout (LDO) Regulator 회로에 관한 것이다. 저 잡음을 위해 Bandgap Voltage Reference에 사용된 BJT 다이오드의 유효면적을 증가시켜야 함을 LDO의 잡음해석을 통해 나타내었다. 이를 위해 다이오드를 직렬 연결하여 실리콘의 실제면적은 최소화 하면서 다이오드의 유효면적을 증가시키는 방법을 적용하였고, 이를 통해 LDO의 출력잡음을 줄일 수 있음을 확인하였다. $0.18{\mu}m$ CMOS 공정으로 제작된 LDO는 입력전압이 2.2 V 에서 5 V 일때 1.8 V의 출력전압에서 최대 90 mA의 전류를 내보낼 수 있다. 측정 결과 Line regulation은 0.04%/V 이고 Load regulation은 0.45%를 얻었으며 출력 잡음 레벨은 100 Hz와 1 kHz offset에서 각각 479 nV/$^\surd{Hz}$와 186 nV/$^\surd{Hz}$의 우수한 성능을 얻었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.217-220
• /
• 2005

Zero tail type mini excavator is small in size and capacity compared with medium or large excavator. Therefore noise and heat problems are major issues in design due to layout of each components such as engine and hydraulic module. It is necessary to assure reduction of noise and vibration in construction machine, due to be enforced regulation for high noise construction machinery at home and abroad. The objective of this study is to provide basic data which is apply to predict noise effect in detail design stage by estimating noise of cabin for zero tail type mini excavator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.283-287
• /
• 2012

Recently, Most of diverse noise of vehicles has decreased competitively according to development of the automotive manufacturing technology. Especially, Passenger car manufacturers has been conducting buzz, squeak and rattle(BSR) noise test as a method of the noise evaluation tests to reduce an unpleasant sound from interior parts on the driving the car. The purpose of this paper is to confirm the change of the noise generated in the product after the reliability evaluation. Here by the BSR test procedure used the test regulation of 'G' company.

• 접착 및 계면
• /
• 제3권3호
• /
• pp.1-6
• /
• 2002

본 연구에서는 고무 재료의 설계 인자 중 어떤 것이 소음에 주된 영향을 주는지 검토하였고, 저소음 타이어 개발을 위한 고무 재료의 설계 방향을 제시하였다. 소음은 무향실 타이에 소음과 고무 시편의 충격 소음을 측정하였고, 고무 시편의 물성은 경도, 인장 물성 및 동적 점탄성을 측정하였다. 타이어 소음에 영향을 주는 고무 재료의 주된 설계 인자는 경도 또는 300% 모듈러스이고 양자간에는 정의 상관관계가 있다. 따라서 고무 재료의 경도 또는 300% 모듈러스를 낮게 설계하면 소음을 저감시킬 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.434-437
• /
• 2006

The expansion joints are installed for connecting the bridge segments. The ambient noise expansion joints are required in domestic market because of regulation on the noise neighboring traffic roads established by ministry of environment. Therefore, field tests for measuring environment noise depending on the types of the expansion joints are carried out in order to examine the effect of expansion joints into the environments. Related geometrical analysis has been performed.