• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.520-525
• /
• 2011

As worldwide concern stands on global warming and greenhouse gases from internal combustion engine, the interests in technologies for a highly efficient powertrain has been increased. Concurrently the investigation to improve the deteriorated NVH, a by-product of energy efficient powertrain, is conducted seriously. The NVH performance of a new type of active engine mount that offers increased advantages over a passive hydraulic mount is examined using a newly developed 6-DOF simulator. The simulator is in the shape of Hexapod Stewart Platform adopting LEMA, a new type of actuator which is patented and commercialized by ACT Inc,, the world wide leader in the design, development, and manufacture of high performance linear electro-magnetic actuators for active vibration control. The target vibration signals of an aimed vehicle at four engine mounts are measured and simulated by 6-DOF simulator at the laboratory. The resulting NVH performances of the new active mounting system at a vehicle and on a simulator are examined and compared. Even though the active mount performance of lab test demonstrates less effective than the result of a real vehicle test, vibration reduction is identified through the simulator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.659-666
• /
• 2009

As the density and height of the buildings nearby subway lines get higher, the unprecedented residents' appeals for noise are on the rise. Furthermore, in accordance with the revision of enforcement regulations on the Noise and Vibration Control Act, the night time noise standards have been reinforced by 5dB effective on January 1st 2010 and the appropriate measures shall be taken accordingly. For the settlement of the public grievances against noise and vibration generated on tracks in at-grade and elevated section, the installation of continuously-welded-rail, rail lubrication system, improved fastening system and higher noise barrier is currently executed. Nevertheless, the noise and vibration levels in some areas are still exceeding the limits required in the regulation. Among the measures, an installation of higher noise barrier or noise tunnel seems to be the most effective way; however, it has limitations owing to the structural stability of existing elevated structures. The paper in consideration of the local conditions and foreign practices discusses the installation of fairing system under the train body as an noise insulation panel in order to reduce the rolling noise and under-carriage noise. Based on the result of this study, a performance verification test during actual train operation is in progress for further study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.904-908
• /
• 2008

As the various industrial production machinery has come into being by development of industrial technology, the productivity of the basic industrial production machinery has improved and the international competitiveness of the one of Korea has strengthened. However, at the same time, noise from various industrial production machinery disturbs the quiet environment. There are 35 kinds of the noise emission machinery defined in the noise and vibration control act according to the horse power and the number of machinery. These were classified in 1992 through investigation from 1990 to 1991, and the characteristic of the noise emission machinery may be different from the past one. So we need to investigate the characteristics of the noise emitted by machinery to control it rightly. Also we need to investigate the new noise emission machinery which has come into being recently. In this survey, we measured sound intensity of 32 noise emission machinery to calculate the sound power levels of those and investigated the characteristic of the sound power level of those according to the frequency. From the survey, we found that the forging machine, concrete pipe and pile making machine, sawing machine, etc. are the noisy machinery. And the automatic packing machine, sewing machine, centrifuge, etc. are the silent machinery. Also the generator, the concrete pipe and pile making machine, the printing machine, etc. emit the low frequency noise, and the molding machine, the stone cutter, the metal cutter, etc. emit the high frequency noise. Lastly, we intented to propose the proper guide line of classifying noise emission machinery.

• 환경영향평가
• /
• 제20권2호
• /
• pp.123-131
• /
• 2011

The objective of this study is to prepare the effective management plan of environmental noise with a noise map, and the guideline on the management plan of environmental noise was suggested through the review of existing application examples. The management plan of environmental noise with a noise map includes the practical contents in the stages of subdivision of management areas, establishment of reduction measures, opinion collection, post investigation, and reformulation of management plan. First, the classification of management regions is performed considering the excess degree of noise standard and the facility type in the phase of subdivision of management areas. Second, the optimal management plan is established through the investigation of regional characteristics and various noise reduction measures in the phase of establishment of reduction measures, which includes the examination of noise reduction effects with a noise map and the budget planning with the costing of noise reduction measures. Third, the opinion survey with a local resident and a expert is carried out in order to prove the validity of the management plan in the phase of opinion collection, and the management plan is modified with gathered opinions. Fourth, the post examination plan with noise measurement is performed in order to verify the real effect of noise reduction measures according to the management plan in the phase of post investigation. Finally, the amendment of the management plan as well as the improvement of a noise map is carried out at a regular cycle in the phase of reformulation of management plan.

• Smart Structures and Systems
• /
• 제12권5호
• /
• pp.547-577
• /
• 2013

To suppress vibration and noise of mechanical structures piezoelectric ceramics play an increasing role as effective, simple and light-weighted damping devices as they are suitable for sensing and actuating. Out of the various piezoelectric damping methods this paper compares mode based active control strategies to passive shunt damping for thin plates. Therefore, a new approach for the optimal placement of the piezoelectric sensors/actuators, or more general transducers, is proposed after intense theoretical investigations based on the Kirchhoff kinematical hypotheses of plates; in particular, modal and nilpotent transducers are discussed in detail. Based on the proposed distribution a discrete design for modal transducers is implemented, tested and verified on an experimental setup. For active control the modal sensors clearly identify the eigenmodes, whereas the modal actuators impose distributed eigenstrains in order to reduce the transverse plate vibrations. In contrast to the modal control, passive shunt damping works without requiring additional actuators or auxiliary power and can therefore act as an autonomous system, but it is less effective compensating the flexible vibrations. Exemplarily, an acryl glass plate disturbed by an arbitrary force initialized by a loudspeaker is investigated. Comparing the different methods their specific advantages are highlighted and a significant broadband reduction of the vibrations of up to -20dB is obtained.

• 화약ㆍ발파
• /
• 제30권2호
• /
• pp.1-8
• /
• 2012

국내에서 발파풍과 지반진동을 취급하는 유일한 법규가 바로 환경부의 소음진동관리법이다. 하지만 이 법규는 생활소음과 생활진동을 주로 취급하고 있으므로 지반진동에 대한 안전기준을 dB(V) 단위의 진동레벨에 의해 규정하고 있다. 그러나 발파로 발생되는 지반진동은 충격진동에서 볼 수 있는 것과 같은 독특한 특성을 지니고 있으며, 그 지속시간도 기계류나 장비류, 시설물 등에서 발생하는 진동과 비교하여 매우 짧은 특성이 있다. 그러므로 발파작업에 대한 진동법규에서는 통상 구조물 손상에 대한 지반진동의 영향을 고려하여 안전기준을 최대입자속도(peak particle velocity; PPV)로 설정한다. 그럼에도 불구하고 진동파동의 주파수 스펙트럼에 대한 충분한 고려도 없이 PPV로부터 진동레벨(vibration level; VL)을 예측하거나 $m/kg^{1/2}$이나 $m/kg^{1/3}$ 단위의 환산거리에 따라 VL을 추정하려는 시도들이 있다. 이 시도들은 주로 발파공사 과정에서 소음진동관리법을 충족시키려는 목적으로 이루어지는 것으로 보인다. 그러나 원칙적으로 전체 주파수 스펙트럼 상에서는 속도나 가속도 피크치 사이에는 아무런 상관관계도 존재할 수 없다. 따라서 이러한 상관관계나 추정식의 유도작업은 반드시 동일하거나 매우 유사한 주파수 스펙트럼을 지니는 파동들에 한해서 수행되어야 한다.

• 화약ㆍ발파
• /
• 제30권2호
• /
• pp.86-97
• /
• 2012

건설현장의 노천발파로 발생되는 지반진동은 인체의 간접피해 및 구조물의 물적 피해를 동반하며, 인체는 진동레벨, 구조물은 진동속도 단위로 평가한다. 본 연구는 실시단계 진동기준 중 진동속도 외 누락된 진동레벨 단위를 추가, 진동속도 및 진동레벨을 동시 측정한 적용사례로서 추후 민원이 예상되는 현장관리에 도움이 될 것으로 여겨진다. 발파진동 및 진동레벨 추정식 도출을 위한 표본수는 총 232개가 사용되었으며, 진동속도 0.3 cm/s와 진동레벨 75 dB(V) 기준의 지발당장약량을 비교한 결과, 후자가 20.0~40.9% 여유가 있음을 입증하여 진동레벨 단위척도 추가는 전혀 문제되지 않음을 언급하였다. 소음 진동 관리법이 우선된다면 노천발파 시공비용은 훨씬 저감될 것으로 생각된다. 본 연구에서 사용된 계측기기는 국내에서 처음으로 진동속도 및 진동레벨을 동시 측정할 수 있는 특성을 지닌 SV-1모델을 사용하였다.

• 한국농촌건축학회논문집
• /
• 제23권3호
• /
• pp.1-8
• /
• 2021

Rural multi-purpose buildings needs to ensure their safety against various disasters. Therefore, a pile foundation, which is a foundation type that can transmit the load of the structure to the bedrock layer, has been designed. The pile foundation method is largely divided into driving piles method and pre-bored pile method. Recently, in order to respond to the Noise and Vibration Control Act and related environmental complaints, construction of pile foundation adopts pre-bored pile method. The bearing capacity of the pre-bored pile method is calculated through a load test in situ. However, a disadvantage stems in that it is difficult to measure the ultimate bearing capacity due to field conditions. Therefore, in this study, the skin frictional force of pre-bored pile was measured through a model test in laboratory for each pile filling material. In result, the pile filling material with using circulating resources shows superior skin frictional force than ordinary portland cement. This study also judged that the result can be applied in place of ordinary Portland cement in the field.

• 터널과지하공간
• /
• 제32권6호
• /
• pp.345-352
• /
• 2022

도심지 터널 건설에서 발파공법은 민원이 제기되는 문제점이 있어 적용에 제약받고 있다. 이에 대한 대안으로 TBM 및 기계굴착 공법 적용이 필수적으로 검토되고 있다. 이 중 쉴드 TBM(Tunnel Boring Machine)은 굴진과 세그먼트 체결이 번갈아 반복되며 굴진하는 공정을 가지고 있는데, 세그먼트 체결 동안 굴진을 멈추게 된다. 이러한 가동 정지시간을 최소화하고자 세그먼트 체결 중에도 가동할 수 있는 연속굴착형 TBM 기술이 개발되고 있다. 나선형 세그먼트의 굴진 반력을 확보하기 위해 추진잭을 개조하고 신뢰성을 확보하는 연구가 진행 중이다. 또한 체결 중 세그먼트를 제외한 나머지 부분의 추진잭을 가동하는 유압제어 및 유압시스템 설계기술이 개발될 예정이다. 본 보고는 연속굴착형 TBM 과제 중 부품개조 및 유압제어 기술에 대한 일부 내용을 소개한다.