• ETRI Journal
• /
• 제34권4호
• /
• pp.518-526
• /
• 2012

This paper proposes LC voltage-controlled oscillator (VCO) phase-locked loop (PLL) and ring-VCO PLL topologies with low-phase noise. Differential control loops are used for the PLL locking through a symmetrical transformer-resonator or bilaterally controlled varactor pair. A differential compensation mechanism suppresses out-band spurious tones. The prototypes of the proposed PLL are implemented in a CMOS 65-nm or 45-nm process. The measured results of the LC-VCO PLL show operation frequencies of 3.5 GHz to 5.6 GHz, a phase noise of -118 dBc/Hz at a 1 MHz offset, and a spur rejection of 66 dBc, while dissipating 3.2 mA at a 1 V supply. The ring-VCO PLL shows a phase noise of -95 dBc/Hz at a 1 MHz offset, operation frequencies of 1.2 GHz to 2.04 GHz, and a spur rejection of 59 dBc, while dissipating 5.4 mA at a 1.1 V supply.

• 음성과학
• /
• 제15권4호
• /
• pp.85-96
• /
• 2008

Automatic speech recognition has severe performance degradation under noisy environments. To cope with the noise problem, many methods have been proposed. Most of them focused on noise-robust features or model adaptation. However, researchers have overlooked utterance verification (UV) under noisy environments. In this paper we discuss UV problems based on the normalized confidence measure. First, we show that UV performance is also degraded in noisy environments with the experiments of an isolated word recognition. Then we observe how the degradation of UV performances is suffered. Based on the UV experiments we propose a modeling method of the statistics of phone confidences using sigmoid functions. For obtaining the parameters of the sigmoidal models, the particle swarm optimization (PSO) is adopted. The proposed method improves 20% rejection performance. Our experimental results show that the PSO-NCM can apply noise speech recognition successfully.

• The Journal of the Acoustical Society of Korea
• /
• 제17권1E호
• /
• pp.10-13
• /
• 1998

We propose a robust non-speech rejection algorithm using the three types of pitch-related parameters. The robust non-speech rejection algorithm utilizes three kinds of pitch parameters : (1) pitch range, (2) difference of the successive pitch range, and (3) the number of successive pitches satisfying constraints related with the previous two parameters. The acceptance rate of the speech commands was 95% for -2.8dB signal-to-noise ratio (SNR) speech database that consisted of 2440 utterances. The rejection rate of the non-speech sounds was 100% while the acceptance rate of the speech commands was 97% in an office environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.443-448
• /
• 2000

In this paper, we propose a novel adaptive feedforward controller for periodic disturbance and noise cancellation, with a frequency tracking capability. It can be added to an existing feedback control system without altering the original closed-loop characteristics, which is based on adaptive algorithm. We introduce novel algorithm "Constrained AFC(adaptive feedforward controller) algorithm" that increase the convergence region regardless of the delay in the closed loop system. In the algorithms, coefficients of the controller are adapted using the residuals of constrained structure which are defined in such a way that the coefficients become time invariant. The proposed algorithm not only estimate the magnitude and phase of the tonal disturbance and noise but also track the frequency of the tone, which changes in quasi-static manner. The frequency tracking algorithm uses the instantaneous frequency approach based on Hilbert transform. A number of computer simulations have been carried out in order to demonstrate the effectiveness of proposed method under various conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2499-2501
• /
• 1999

Most of sensorless algorithm are based on motor equations where it is necessary to find the phase voltage and current. However, measurement error and environmental noise deteriorate the accuracy of speed estimation of PMSM. This paper investigates speed sensorless control of PMSM for noise rejection in harsh environment. The proposed algorithm is based on the interaction between electrical parameter and random noise. The evolution strategy is used for minimizing the noise effect. The proposed algorithm is verified through simulation and experiment.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.77-88
• /
• 1997

The heat rejection to coolant is a dominant factor for building vehicle cooling system such as radiator and cooling fan. Since the vehicle cooling system also has effects on fuel consumption and noise, the study of heat rejection to coolant has been emphasized. However, the study on heat rejection to coolant has been mainly focused on the field that related to the characteristics of combustion and localized heat loss. It is no much of use in design for the entire cooling system because it is focused on such a specific point. In this work, the heat rejection rate to coolant for four different engines are obtained to derive a simple heat transfer empirical formula that can be applied to the engine cooling system design, and it is compared with the other studies. Also, to observe effects of engine operation factors and heat transfer factors on coolant, we measured the metal temperature and the heat rejection rate. The heat rejection to coolant does not depend significantly upon the coolant flowrate, but mainly upon the amount of air fuel mixture and the air fuel ratio as long as the composition of coolant does not change. The reduction of heat rejection to coolant did not effectively improve the fuel consumption, but was mostly converted to raise the exhaust gas temperature and the oil temperature.

• ETRI Journal
• /
• 제37권3호
• /
• pp.637-645
• /
• 2015

Common-mode noise (CMN) is an unresolved problem in wireless capsule endoscopy (WCE) systems. In a WCE system, CMN originates from various electric currents found within the human body or external interference sources and causes critical demodulation performance degradation. The differential operation, a typical method for the removal of CMN rejection, can remove CMN by subtracting two signals simultaneously received by two reception sensors attached to a human body. However, when there is impedance mismatching between the two reception sensors, the differential operation method cannot completely remove CMN. Therefore, to overcome this problem, we propose an enhanced CMN rejection method. The proposed method performs not only subtraction but also addition between two received signals. Then a CMN ratio can be estimated by sufficient accumulation of division operation outcomes between the subtraction and addition outputs during the guard period. Finally, we can reject the residual CMN by combining the subtraction and addition outputs.

• 말소리와 음성과학
• /
• 제3권2호
• /
• pp.65-70
• /
• 2011

Recently, audio-visual speech recognition (AVSR) has been studied to cope with noise problems in speech recognition. In this paper we propose a novel method of deciding weighting factors for audio-visual information fusion. We adopt the particle swarm optimization (PSO) to weighting factor determination. The AVSR experiments show that PSO-based normalized confidence measures (NCM) improve the rejection performance of mis-recognized words by 33%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.240-242
• /
• 2005

It is well known that the PD (Partial Discharge) signals are generated if insulators have some defects such as voids in electrical facility and various PD detection methods are developed for preventing electrical troubles. So, an interest for the PD signals is higher and higher according to the high concern for the defects detection method of the aging electrical facility. When the equipment to detect PD signals installed at site and it works, a lot of noises flow in the equipment from surrounding situation and it will be mixed with original PD waveform. So we can not get the desired PD waveform. Therefore, there are many trial to reject or suppress the noise from the PD signals from long times ago. The greater of them used the hardware such as bridge circuits and frequency filters to suppress the noise. This paper proposed a novel noise rejection method in acquired data from PD detection equipment. The noise has the irregular phase and higher signal level than real PD, and noise decision is performed after inspection of pulse distribution in ${\Phi}$-q-n graph of acquired data from PD detection equipments. By experimental results on high voltage electric equipments, it is shown that proposed method has good performance. It is expected that this noise rejection technology is useful in numeric calculation and trend management of PD level.

• Journal of electromagnetic engineering and science
• /
• 제14권2호
• /
• pp.47-53
• /
• 2014

This paper presents a high gain and high harmonic rejection low-noise amplifier (LNA) for software-defined radio receiver. This LNA exploits the high quality factor (Q) series resonance technique. High Q series resonance can amplify the in-band signal voltage and attenuate the out-band signals. This is achieved by a source impedance transformation. This technique does not consume power and can easily support multiband operation. The chip is fabricated in a $0.13-{\mu}m$ CMOS. It supports four bands (640, 710, 830, and 1,070MHz). The measured forward gain ($S_{21}$) is between 12.1 and 17.4 dB and the noise figure is between 2.7 and 3.3 dB. The IIP3 measures between -5.7 and -10.8 dBm, and the third harmonic rejection ratios are more than 30 dB. The LNA consumes 9.6 mW from a 1.2-V supply.