• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1187-1192
• /
• 2003

The railroad noise has been considered as one of environment pollution and complaints about it have been increasing every you. Therefore, the establishment of railroad noise monitoring network is necessary. It will be designed for monitoring railroad noise, storing data of railroad noise continuously and providing the fundamental knowledge for the measures of railroad noise. For this, we investigated the actual condition of railroad noise and status of noise level by floor in apartments around the capital region, Daejeon, Daegu, Gwangju, and Busan. Additionally, we present the basic data that will be used for predicting the noise level near railroad in the environmental impact assessment

• 한국음향학회지
• /
• 제27권8호
• /
• pp.403-410
• /
• 2008

급속한 도시인구의 증가와 교통량증가로 도로변 주거지역의 소음문제가 날로 심각해지고 있다. 본 연구에서는 도로교통량과 건축물의 위치와 형태를 고려한 소음수준을 평면적, 입체적으로 예측한다. 소음현황수준을 기초로 하여 소음원인 차량의 속도제어와 차종별 통행제한을 통한 변화치를 비교하여 개선방안을 도출하고자 한다. 분석결과 건물의 입체적분석보다 평면적 분석에서 소음환경기준치를 초과하는 면적의 비율이 높았고 주간보다 야간의 초과비율이 높게 나타났다. 개선방안은 하나의 방안을 실시했을 때보다 여러가지의 개선방안을 조합한 경우에 저감효과가 높게 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.25-32
• /
• 2005

In China, environmental noise policies are composed of correlated laws adopted by the Standing Committee of the National People's Congress and promulgated by the President of the country, regulations promulgated by the State Council and/or local government, standards issued by the Standardization Administration Committee (SAC) under the State Council. The laws mainly include the 'Environmental Protection Law' and the 'Law on Prevention and Control of Pollution From Environmental Noise' Regulations are often applied to a special noise pollution phenomenon of wide influence. They are generally only effective in a given area and/or a specific period. Tens of correlated standards specify the noise level limits of different functional zones of land use and of different equipment, machines, devices, appliances etc., and the measurement methods. In this presentation, a brief introduction to these policies and their operations is given and discussed. The conclusion is that the policies supply an effective legislative basis for environmental noise prevention and control in China, but still a lot of work should be conducted and completed to strive for a quiet society.

• 한국측량학회지
• /
• 제29권3호
• /
• pp.229-235
• /
• 2011

교통소음공해가 도시생활에 있어서 건강에 중요한 영향을 주고 있으며 소음을 효과적으로 측정하기 위해 소음분포에 관한 소음지도제작은 매우 긴요한 일이 되고 있다. 도시교통소음지도는 소음을 조정하기 위한 효과적인 방안을 찾고 실질적인 근거를 마련하는데 도움을 주고 있으며, 소음이 도로로부터 주거지역으로 어떻게 전파되는지를 시각적으로 이해하기 쉽게 정보를 주고 있다. 본 연구에서는 도로와 거주지역간의 개발형태를 3가지로 구분하여 고려하였고, 주거지역내에서의 필지별 소음정도를 도로로부터 거리가 떨어짐에 따른 소음감쇄를 ArcGIS의 보간법을 적용하여 계산하고 그 결과를 이용하여 소음지도를 제작하였다. 그 결과 주거지역내의 교통 소음수준이 국내 환경기준을 초과하고 있음을 알 수 있었고, 각각의 필지별 소음수준을 추정할 수 있었다. 이것은 향후교통소음조정계획을 수립하거나 공시지가평가 시 활용될 수 있을 것으로 판단된다.

• 한국환경과학회지
• /
• 제13권1호
• /
• pp.99-107
• /
• 2004

This research is to determine the level of environmental pollution at a blasting construction area which is the origin of noise, vibration, and suspended particle, and to compare the results with other domestic and international standard data. This experiment is also to find out the effects resulting from blasting construction and to propose a plan that can decrease environmental pollution. The blasting construction area is a factory site which is about one and half million square meter and sewage disposal plant is about ninety thousand square meter. Both were selected as the areas for the tests to be conducted in determination test. The test to determine the level of noise, vibration, and total suspended particle was conducted thirty times around the blasting construction area by comparing measurement results and numerical analysis. However, as the test was not conducted in the laboratory but in the actual blasting construction area, it was not possible to do the test with the same exact conditions each true. Therefore, the test was not ideal as conditions could change from test to test. For the most part, the level of noise was below the standard level of 70dB. Every vibration test was under the standard limitation. For example, a house, 200m away was tested for noise and vibration and the level was found to be under the 0.2 cm/sec which is the standard for specialty designed cultural sites., i.e very low level. Also a buried oil pipeline that was 30m away also marked under 2.0cm/sec which is the norm for an industrial area. However, if there were an oil pipeline under the house, the amount of charging gunpowder per hole should be decreased compared to the amount used in the test. The test result for suspended particles under the standard limitation which is 24hour average 300$\mu\textrm{g}$/㎥ at a distance from blasting wavelength, but at detonator, total suspended particle from the blast origin exceeded the standard limitation. If explosion occurs when it detonates in the hole, most of the energy would be absorbed in the crushing of rocks, but some remaining energy would make noises and vibration inevitable. So the important thing is how to minimize the environmental pollution from the blasting. There should be regulations in order that the standard limitation is not exceeded, and to decrease the environmental pollution from the blasting.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.277-282
• /
• 2006

Road traffic noise is not produced by any one factor rather occurs as a composition of various factors. Its occurrence is made by running engine noise, tire frictional, and exhaust noise etc. The quality of the noise depends on the size of the vehicles, rotation and engine speed, vehicle load, package state of the road and incline etc. The occurrence of noise level of heavy trucks appears louder than smaller vehicles and the noise levels produced differs according to speed and load etc between similar size vehicles. Other factors such as traffic density, average speed, mixing rate of heavy vehicles, and the distance between vehicles also generate road traffic noise. In this paper we examine 2, 4, and 6-lane roads in Jeonju. Consequently, this study examined the means used to measure road traffic noise. It was found that when there is a large traffic density and the average velocity is below 70 km/hr, the noise level could receive a relative proper value by the current measuring means. But in the case of night-time, it was found that the current measuring method is inapposite.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.548-553
• /
• 2004

The construction noise has been considered as one of environment pollution and complaints about it have been increasing every year. In order to reduce construction machinery noise, the product noise labeling for construction machinery has been recommended since 1 February 1996 and in the near future the government will convert the recommended product noise labeling to the mandatory product noise labeling fir high noise construction machinery. Therefore, we investigated the noise and vibration level of 302 construction machines and the effect of noise reduction for the soundproof facilities in construction work sites to support the policy of the government. Additionally, we present the basic data that will be used for setting the standard of construction machinery noise and predicting the noise level near construction work sites in environmental impact assessment.

• 한국소음진동공학회논문집
• /
• 제17권3호
• /
• pp.274-281
• /
• 2007

Road traffic noise is not produced by any one factor rather it occurs as a composition of various factors. Its occurrence is made by running engine noise, tire frictional, and exhaust noise etc. The quality of the noise depends on the size of the vehicles, rotation and engine speed, vehicle load, package state of the road and incline etc. The occurrence of any noise level of heavy trucks appears louder than smaller vehicles and the noise levels produced differs according to speed and load etc between similar size vehicles. Other factors such as traffic density, average speed, mixing rate of heavy vehicles, and the distance between vehicles also generate road traffic noise. In this paper we examine 2, 4, and 6-lane roads in Jeonju. Consequently, this study examines the means used to measure road traffic noise. It was found that when there is a large traffic density and the average velocity is below 70 km/h, the noise level could receive a relative proper value by the current measuring means. But in the case of night-time, it was found that the current measuring method is inapposite.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1157-1161
• /
• 2007

A construction noise is the main reason for people's petition among the pollution. The purpose of this study is to develop the noise prediction program to see the level of the noise on the construction site more accurately. For this purpose, the database of the power level on the various equipments was made. The noise reduction by distance and the noise reduction by diffraction of barrier were mainly considered and calculated. The simple noise prediction program will provide the information about proper height and length of the potable barrier which satisfies noise criteria of the construction sites from a construction planning stage. To investigate the reliability of this program, the predicted data was compared with the measured data. An average of difference between measured data and predicted data is 1.3 dB(A) and a coefficient of correlation is about 0.95.

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.511-518
• /
• 2005

The railroad noise has been considered as one of environment pollution and complaints about it have been increasing every year. Therefore, the establishment of railroad noise monitoring network is necessary. It will be designed for monitoring railroad noise, storing data of railroad noise continuously and providing the fundamental knowledge for the measures of railroad noise. For this, we investigated the actual condition and status of railroad noise according to distance around Daejeon, Daegu, Gwangju, and Busan. This paper shows the basic data that will be used for predicting the noise level near railroad in the environmental impact assessment.