• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.393-399
• /
• 2011

We evaluate the link-level performance of cooperative multi-hop relaying networks with an maximum distance separable (MDS) code. The effect of the code on the link-level performance at the destination is investigated in terms of the outage probability and the spectral efficiency. Assuming a simple topology, we construct an absorbing Markov chain. Numerical results indicate that significant improvement can be achieved by incorporating an MDS code. MDS codes successfully facilitate recovery of the message block at a relaying node due to powerful error-correcting capability, so that it can reduce the outage probability. Furthermore, we evaluate the average number of hops where the message block can be delivered.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.225-232
• /
• 2020

The underlaying communication scheme in 5G cellular network is a very promising resource sharing scheme, and it is an effective scheme for improving service performance of 5G and reducing communication load between a cellular link and a device to device (D2D) link. This paper proposes the algorithm to minimize the resource interference that occurs when performing 5G-based multi-class service on gNB(gNodeB) and the cooperative priority-based resource allocation scheduling scheme (CPRAS) to maximize 5G communication service according to the analyzed control conditions of interference. The proposed CPRAS optimizes communication resources for each device, and it optimizes resource allocation according to the service request required for 5G communication and the current state of the network. In addition, the proposed scheme provides a function to guarantee giga-class service by minimizing resource interference between a cellular link and a D2D link in gNB. The simulation results show that the proposed scheme is better system performance than the Pure cellular and Force cellular schemes. In particular, the higher the priority and the higher the cooperative relationship between UE(User Equipment), the proposed scheme shows the more effective control of the resource interference.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.254-262
• /
• 1994

Most of traditional approaches to leader election have been based on a node ID number. As performances were not considered in these approaches, they were not very practical. So there has been a study on leader election strategies based on performances. This paper proposes new preference based on performances. While link failures occur during the election period, the elected leader's performance may not be the expected one. We simulate these effects of link failures on the robustness at election stragies. In particular, we tried in this study to find the best of the distributed election strategies based on the bidirectional preference from the standpoint of the robustness through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7A
• /
• pp.662-668
• /
• 2011

This paper analyzes the performance of the Ad hoc On-demand Distance Vector (AODV) routing protocol and Optimized Link State Routing (OLSR) for Mobile Ad hoc Networks (MANETs) using node mobility models. Mobility affects the performance of a routing protocol as it causes changes to network topology. Thus, evaluating the performance of a MANET routing protocol requires mobility models that can accurately represent the movements of mobile nodes. Therefore, this paper evaluates the performance of the AODV and OLSR routing protocols using the random way point model and the Levy walk model by the ns-2 simulations.

• Journal of Korea Multimedia Society
• /
• v.20 no.4
• /
• pp.593-605
• /
• 2017

In applications which are covered wide range, it is possible that one or more number of Unmanned Aerial Vehicle(UAV) squadrons are used to perform a mission. In this case, it is most important to communicate seamlessly between the UAV squadrons. In this paper, we applied the modified OLSR(OSLR-Pds) which can prediction for state of the link for the communication in UAV squadron, and applied the modified AOMDV which can build multi-path for the communication between UAV Squadrons. The mobility of nodes are modeled using Gauss-Markov algorithm, and relative speed between nodes were calculated by derive equation of movement, and thereby we can predict link state for in a squadron and between squadrons. An experiment for comparing AODV, AOMDV and the proposed routing protocol was conducted by three factors such as packet delivery ratio, end to end delay, and routing overhead. In experiment result, we make sure that the proposed protocol performance are superior in these three factors. However, if the density of the nodes constituting FANET are too low, and if the moving speed of node is very slow, there is no difference to others protocols.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.158-159
• /
• 2011

Energy efficiency in wireless sensor networks (WSNs) is one significant factor that needs to be considered when making any designs or doing any enhancements on the communication protocol stack. In WSNs using traditional geographic routing, when a sensor node receives a data packet that needs to be transmitted to the sink, it will forward the packet to the neighbor node which is closest to the sink. The traditional geographic routing assumes that the link quality is always 100%. This may cause a bad result as per which we waste too many energy for retransmissions between the two nodes. Thus, the problem here is how to select such node as forwarder at most efficiently in the aspect of both energy consumption and the distance toward the destination. The better node we choose, the more energy we can conserve for the whole network. In this paper, we propose a next-hop forwarding selection metric, called Energy Consumption for Transmission (ECT), which can resolve the above problem in the best way.

• Korean Journal of Artificial Intelligence
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2023

This paper presents a comprehensive scheme for assessing the importance of multiple microgrids (MGs) network that includes distributed energy resources (DERs), renewable energy systems (RESs), and energy storage system (ESS) facilities. Due to the uncertainty of severe weather, large-scale cascading failures are inevitable in energy networks. making the assessment of the structural vulnerability of the energy network an attractive research theme. This attention has led to the identification of the importance of measuring energy nodes. In multiple MG networks, the energy nodes are regarded as one MG. This paper presents a modified PageRank algorithm to assess the importance of MGs that include multiple DERs and ESS. With the importance rank order list of the multiple MG networks, the core MG (or node) of power production and consumption can be identified. Identifying such an MG is useful in preventing cascading failures by distributing the concentration on the core node, while increasing the effective link connection of the energy flow and energy trade. This scheme can be applied to identify the most profitable MG in the energy trade market so that the deployment operation of the MG connection can be decided to increase the effectiveness of energy usages. By identifying the important MG nodes in the network, it can help improve the resilience and robustness of the power grid system against large-scale cascading failures and other unexpected events. The proposed algorithm can point out which MG node is important in the MGs power grid network and thus, it could prevent the cascading failure by distributing the important MG node's role to other MG nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.72-84
• /
• 2005

Optical burst switching networks usually employ one-way reservation by sending a burst control packet with a specific offset time, before transmitting each data burst Same. Due to such a Property, burst-contentions occur when multiple bursts contend for the same wavelength in the same output link simultaneously in a node, leading to burst losses, eventually degrading the quality of service. Therefore, in this paper, we propose a dynamic routing algorithm using minimum local state information in order to decrease burst-contentions. In this proposed scheme, if burst loss rate exceeds a threshold value at a certain node, a new alternative routing path is chosen according to burst priority and location of burst generation, which enables the contending bursts to detour around the congested link. Moreover, for reducing the effect of sending bursts on the primary path due to the alternative path, we also apply a minimum path-cost based routing on link-cost concept. Our simulation results show that proposed scheme improves the network performance in terms of burst loss probability and throughput by comparing with conventional one.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.53-60
• /
• 2012

In this paper, an improved algorithm of distributed QoS is proposed for real-time networks. This algorithm like a delay-constrained unicast routing(DCUR) algorithm uses either least-cost(LC) path or least-delay(LD) path of an active node, but when there is a loop, this algorithm is quite different from DCUR in choosing the link between the active node and the previous node to replace the original loop path. And this algorithm makes the construction of the paths more efficiently.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.758-760
• /
• 2012

The wireless sensor network is used to get information that location tracing or data of surrounding areas. Unnecessary retransmission request or many energy consumption because the transmission over the wireless links. In order to select the link of reliable and energy efficient to estimate the quality of radio link technique is required using RSSI, LQI, and so on. In this paper, each path between the sensor nodes, a small in the path within standard deviation of shall be determined the priority. Each path a high priority of the node values, respectively LQI is accumulated. Node can be selected the high LQI value path. Among them the less hop count to select the path is proposed. The proposed algorithm is removed the paths of shorten life using high the LQI value of the entire and high hop count even less variation. So its advantage that the sensor nodes can be selected more reliable path.