• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.44-52
• /
• 1998

In this paper, we proposed a node architecture and cell routing strategies for ATM applications in WDM multihop networks. The proposed node architecture employs the optical delay loop for storing the cell which is failed in out-link contention. This optical delay loop allows the delay of one cell without the electro-optic conversion. Therefore, we can get the advantages of S&F(Store-and-Forward) routing in Deflection-based all-optical networks. To support the ATM applications efficiently. we considered the transmission priority of ATM cell so that high priority cell can be transmitted with lower loss and shorter delay than low priority one. Two kinds of routing strategies are designed for this architecture: Scheme-Ⅰand Scheme-Ⅱ. Scheme-Ⅰapplies S&F routing to high cell and Deflection routing to low cell, i.e., high cells are routed along the shortest path based on S&F routing, but low cells are deflected or lost. Schem-Ⅱ is similar to Scheme-Ⅰexcept that low cells can occupy the optical loop if it is available. This Scheme-Ⅱ increases the utilization of network resources without decreasing the throughput of high cell by reducing the low cell loss rate when traffic load is low. Simulation results show that our routing strategies have better performance than conventional ones under non-uniform traffic as well as uniform traffic.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.47-52
• /
• 2005

In this paper we describe SLA metrics and software architecture for newly upcoming IP TV service. Firstly we show the general description for IP TV. This consists of brief description of IP TV, the general figure of configuration and elements of IP TV network and communication protocol stack of IP TV data transmission for deriving communication quality parameter. And we propose SLA metrics depending on quality measurement point. According to the measurement point the measurable SLA metrics are different. The total view of the IP TV SLA measurement and management architecture is shown. When the quality measurement point is the routers that consist of internet node, the IP media NMS is the quality collection system. And when the quality measurement point is the IP TV STB(Set-Top Box), the IP media collector and Quality Collection Server are the quality collection system. And we show the software block diagram of IP TV SLA processing system and the other related network management systems.

• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1605-1612
• /
• 2005

This paper presents the knowledge and experience we obtained by employing multiprocessor systems as a computer simulation design verification to study high-performance computing system. This paper also describes a case study of symmetric multiprocessors (SMP) kernel on a 32 CPUs CC-NUMA architecture using an actual architecture. A small group of CPUs of CC-NUMA, high-performance computer system, is clustered into a processing node or cluster. By simulating the system design verification tools; we discussed SMP OS kernel on a CC-NUMA multiprocessor architecture performance which is $32\%$ of the total execution time and remote memory access latency is occupied $43\%$ of the OS time. In this paper, we demonstrated our simulation results for multiprocessor, high-performance computing system performance, using simulation-based design verification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.657-666
• /
• 2008

The intersection collision avoidance service among various telematics application services is regarded as one of the most critical services with regard to safety. In such safety applications, real-time, correct transmission of service is required. In this paper, we study on efficient infrastructure architecture for intersection collision avoidance using a cooperative mechanism between vehicles and wireless infrastructure. In particular, we propose an infrastructure, called CISN (Cooperative Infrastructure associated with Sensor Networks), in which proper numbers of sensor nodes are deployed on each road, surrounding the intersection. In the proposed architecture, overall service performance is influenced by various parameters consisting of the infrastructure, such as the number of deployed sensor nodes, radio range and broadcast interval of base station, and so on. In order to test the feasibility of the CISN model in advance, and to evaluate the correctness and real-time transmission ability, an intersection sensor deployment simulator is developed. Through various simulations on several environments, we identify optimal points of some critical parameters to build the most desirable CISN.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.5
• /
• pp.199-204
• /
• 2006

To develop a safety-critical network in nuclear power plants that puts more stringent requirements than the competitive commercial ones do, we establish four design criteria - deterministic communication, explicit separation/isolation structure, reliability, verification & validation. According to those design criteria, the fundamental design elements are chosen as follows - a star topology, point-to-point physical link, connection-oriented link control and fixed allocation access control. After analyzing the design elements, we also build a communication architecture with TDM (Time Division Multiplexing) bus switching scheme. Finally, We develop a DDCNet (Deterministic Data Communication Network) based on the established architecture. The DDCNet is composed of 64 nodes and guarantees the transmission bandwidth of 10Mbps and the delay of 10 msec for each node. It turns out that the DDCNet satisfies the aforementioned design criteria and can be adequately utilized for our purpose.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.334-337
• /
• 2005

This paper describes the implementation of DCS communication network that provides high bandwidth and reliability. The network for DCS in this paper adopts the Reflective Memory (RM) architecture and Fast Ethernet physical media that have 100Mbps bandwidth. Also, this network uses Ring Enhancement Device (RED) which was invented to reduce the time delay of each node. The DCS network that is introduced in this paper is named as ERCNet(Ethernet based Real-time Control Network). This paper describes the architecture and working algorithms of ERCNet and performs numerical analysis. In addition, the performance of ERCNet is evaluated by experiment using the developed ERCNet network.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.5
• /
• pp.380-386
• /
• 2015

Panel methods are useful tools for analyzing fluid-flow around a wing section. It has the advantage of fast and accurate calculation, compared to other CFD Methods such as RANS solvers. This paper suggests a piecewise linear panel method in order to improve accuracy of existing panel methods by changing the piecewise constant singularity strength to linear singularity strength(for dipole strength). The piecewise linear panel method adopts the linear distribution of singularity strength, while control point is located at the node of each panel. Formulation of the piecewise linear panel method is given, and some calculation results are shown for typical wing sections.

• Journal of Ship and Ocean Technology
• /
• v.11 no.4
• /
• pp.21-28
• /
• 2007

Recently the importance of the utilization of engineering data is gradually increasing. Engineering data contains the experiences and know-how of experts. Data mining technique is useful to extract knowledge or information from the accumulated existing data. This paper deals with generating optimal polynomials using genetic programming (GP) as the module of Data Mining system. Low order Taylor series are used to approximate the polynomial easily as a nonlinear function to fit the accumulated data. The overfitting problem is unavoidable because in real applications, the size of learning samples is minimal. This problem can be handled with the extended data set and function node stabilization method. The Data Mining system for the ship design based on polynomial genetic programming is presented.

• Annual Conference of KIPS
• /
• 2003.11b
• /
• pp.1229-1232
• /
• 2003

Ad Hoc 네트워크에서 on demand 라우팅 프로토콜로 대표적인 AODV(Ad Hoc On Demand Distance Vector Routing)는 table driven 기반의 라우팅 프로토콜과 비교해 active route만을 라우팅 테이블에 저장하기 때문에 오버헤드가 작고 경로단절시 경로복구를 통해 경로 재설정할 수 있는 장점을 가지고 있으나 경로복구시 대역폭 낭비가 심하고 복구시간이 길다는 drawback을 가지고 있다. 이러한 단점은 많은 라우팅 패킷의 발생으로 기인하는 점이 있다. 본 논문에서는 Expanding Ring Search 알고리즘에서 time out은 timestamp를 이용하여 네트워크 상황에 맞게 가변적으로 적용하는 알고리즘을 개선하여 hop 수에 따라 node traversal time을 설정하도록 제안하였다. 제안한 알고리즘은 시뮬레이션을 통하여 검증하였으며 라우팅 패킷의 발생을 줄이고 throughput에서 향상을 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1329-1338
• /
• 2011

This paper proposes an algorithm and hardware architecture for a broadcast communication which has the worst bottleneck among multiprocessor using distributed memory architectures. In conventional systems, collective communication is converted into point-to-point communications by MPI library cell without considering the state of communication port of each processing node which represents the processing node is in busy state or free state. If conflicting point-to-point communication occurs during broadcast communication, the transmitting speed for broadcast communication is decreased. Thus, this paper proposed an algorithm which determines the order of point-to-point communications for broadcast communication according to the state of each processing node. According to the state of each processing node, the proposed algorithm decreases total broadcast communication time by transmitting message preferentially to the processing node with communication port in free state. The proposed MPI unit for broadcast communication is evaluated by modeling it with systemC. In addition, it achieved a highly improved performance for broadcast communication up to 78% with 16 nodes. This result shows the proposed algorithm is useful to improving total performance of MPSoC.