• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.21-27
• /
• 2001

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression, principle of virtual work is adapted The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another increments of nodal displacements, that is, the step by step method is used in this paper. The results of the finite element method are fairly well agreed with those of various experiments. Using MATLAB program developed in this paper, spring constants and stresses can be predicted by input of few factors.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1195-1208
• /
• 2019

This paper introduces a new two-step procedure for PWR depletion analyses. This procedure adopts the albedo-corrected parameterized equivalence constants (APEC) method to correct the lattice-based raw cross sections (XSs) and discontinuity factors (DFs) by accounting for neutron leakage. The intrinsic limitations of the conventional two-step methods are discussed by analyzing a 2-dimensional SMR with the commercial DeCART2D/MASTER code system. For a full-scope development of the APEC correction, the MASTER nodal code was modified so that the group constants can be corrected in the middle of a microscopic core depletion. The basic APEC methodology is described and color-set problems are defined to determine the APEC functions for burnup-dependent XS and DF corrections. Then the new two-step method was applied to depletion analyses of the SMR without thermal feedback, and its validity was evaluated in terms of being able to predict accurately the reactor eigenvalue and nodal power profile. In addition, four variants of the original SMR core were also analyzed for a further evaluation of the APEC-assisted depletion. In this work, several combinations of the burnup-dependent and -independent XS and DF corrections were also considered. The results show that the APEC method could enhance the nodal equivalence significantly with inexpensive additional costs.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.82-86
• /
• 1990

A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.591-598
• /
• 2002

The interface element method for non-matching FEM meshes is extended using stabilized nodal integration. Two non-matching meshes are shown to be joined together compatibly, with the aid of the moving least square approximation. Using stabilized nodal integration, the interface element method is able to satisfy the patch test, which guarantees the convergence of the method.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.157-162
• /
• 1996

A novel nodal method is developed for the two-dimensional multi-group diffusion equations based on the Spectral-Galerkin approach. In this study, the nodal diffusion equations with Robin boundary condition are reformulated in a weak (variational) form, which is then approximated spatially by choosing appropriate basis functions. For the nodal coupling relations between the neighbouring nodes, the continuity conditions of partial currents are utilized. The resulting discrete systems with sparse structured matrices are solved by the Preconditioned Conjugate Gradient Method (PCG) and sweeping technique. The method is validated on two test problems.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.85-94
• /
• 2002

본 연구에서는 Bubble Mesh 기법을 이용한 적응적 최적 절점생성기법을 제안하고 이를 Element-free Galerkin 방법에 적용하였다. 무요소방법에서 제안된 일반적인 적응적 절점배치방법의 경우 적분격자를 이용하기 때문에 그 절점의 분포가 평가된 오차를 정확히 반영하지 못하고 불균등한 세분화로 인해 주변 절점분포와 급격한 절점밀도의 차이를 보이게 되어 추가적인 해석오차를 유발한다. 본 연구에서는 평가된 오차의 분포와 적분격자를 따라 구성된 불균등한 초기절점배치를 최적삼각격자 구성기법인 Bubble Mesh 기법을 이용하여 최적화 시키는 적응적 절점구성기법을 제안하였다. 절점의 불균등한 배치에 따른 추가적인 오차의 발생현상을 보이기 위해 1차원 문제를 해석하였고 본 연구에서 제안된 Bubble Mesh 기법을 이용한 적응적 무요소해석법의 적용성을 보이기 위해 2차원 문제를 해석하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 요약집 춘계학술발표대회
• /
• pp.59.1-59.1
• /
• 2004

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권3호
• /
• pp.246-255
• /
• 1997

The wave washer springs are expected to behave non-linearly between forces and displace¬ments due to contractions of the height and due to expansions in radial direction. To find out the non -linearity of wave washer springs, the three dimensional plate analysis theory using the finite element method is adopted in this paper. The wave washer springs are considered to be three dimensional plate structures rather than frame structures, because their thickness is normally much smaller than their width. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to X - Y Z coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another nodal displacements, that is, the step by step method is used in this paper. The relations between the increments of forces and displacements in each step are recorded and plotted in chart. The experimental results are compared with the calculated chart and it is shown that there are good coincidences between measured values and calculated ones.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.283-291
• /
• 2005

Accurate seismic analyses of large deformable moving structures are still unsolved problems in the field of earthquake engineering. In order to analyze these problems, the nonlinear finite element method formulated by the absolute nodal coordinate approach is noticed. Because, this formulation has several advantages over the standard procedures on mass matrix, elastic forces and damping forces in the case of large displacement problems. But, it has not been fully studied to build frame structure models by using beam elements in the absolute nodal coordinate formulation. In this paper, we propose the connecting method of the beam elements formulated by the absolute nodal coordinate. The coordinate transformation matrix of this element is introduced into the frame structure. This beam element has the characteristic that the mass matrix and bending stiffiness matrix are constant even if in the case of large displacement problems, and this characteristic is being kept after the transformation. In order to verify the proposed method, we show the numerical simulation results of frame structures for a vibration problem and a large displacement problem.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.504-513
• /
• 1999

Usually bellows are designed for the purpose of absorbing axial movement. To find out axial stiffness of bellows the axisymmetric shell theory using the finite element method is adopted in this paper. Bellows can be idealised by series of conical frustum-shaped elements because it is axisymmetric shell structure. The force required to deflect bellows axilly is a function of the dimensions of the bellows and the materials from which they are made. The displancements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to r-z cylinderical coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another increments of nodal dis-placements that is the step by method is used in this paper. spring constant is analyzed according to the changing geometric factors of u-shaped bellows. The FEM results were agreed with experiment. Using developed FORTRAN PROGRAM spring constant can be predicted by input of a few factors.