• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.6
• /
• pp.284-289
• /
• 2002

The transmission networks do not consist of perfect conductors and a percentage of the power generated is therefore lost before it reaches the loads. Since this network loss contributes to the cost of suppling power to consumers, it must be considered that the most efficient dispatch and location of generators and loads are to be achieved. In this paper, marginal loss factors are calculated for 12 load levels that represent the impact of marginal network losses on nodal prices at the transmission network connection points at which generators are located. Based on comparison analysis of marginal loss factors on 12 load levels, we found the MLF characteristics in KOREA.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1953-1955
• /
• 2002

An efficient automatic mesh generator suitable for the harsh model, which contains abrupt regions and thin layers, is implemented. It adopts two kinds of node placement scheme. In the beginning, the initial nodes on the boundary are generated automatically by an efficient boundary node generation scheme. And then the inner nodes are placed using nodal spacing value technique repeatedly from the initial mesh to final mesh. The effectiveness of the proposed technique is verified by a thin film micro-strip line modeling, where the final mesh contains no sliver elements.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.80-83
• /
• 2002

A 3D shape optimization algorithm integrates the geometric parameterizationi 3D F.E. performance analysis, steepest descent method with design sensitivity and mesh relocation method. The design sensitivity of the surface nodal points is also systematically converted into that of the design variables for the application to parameterized optimization. The proposed algorithm is applied to the optimum design of tank shield model of transformer and the effectiveness is proved.

• Proceeding of KASS Symposium
• /
• 2005.05a
• /
• pp.167-172
• /
• 2005

In the dynamic analysis of cable structures, geometrical non-linearity due to the flexibility of cables must be considered efficiently. In this paper, formulation of tangent stiffness matrix of elastic catenary cable is derived by using relative nodal displacements, self-weight and unstressed cable length. Free vibration analysis of simply supported cable using elastic catenary cable elements is conducted and compared with that using truss elements. The result shows that elastic catenary cable elements are more compatible than truss elements in the case of analysis of cable structures. Furthermore, the characteristic of dynamic behaviors of cable structures by temporary unstability phenomenon is confirmed.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.57-64
• /
• 2015

The construction of vinyl greenhouses are increasing because of economic feasibility, construction period, and construction regulations. However, the vinyl greenhouses are apt to collapse by snow load since they have a small member as a temporary structure. The 3 types of buckling such as global, member and nodal buckling could be occurred to arched structures according to characteristics of cross section. To examine the member buckling, the precision of analysis need to be enhanced. In that case, we can examine the characteristics of the those buckling. The purposes of this study are to verify buckling characteristics of structures using the method of high precision analysis with a center node of member. The results of high precision analysis bring member buckling, and in the analysis method having the center node of member, the value of strength is getting lower than a previous study.

• Journal of Power System Engineering
• /
• v.9 no.1
• /
• pp.42-49
• /
• 2005

The vibration analysis of a rectangular plate with stiffeners is formulated by using the transfer stiffness coefficient method (TSCM). This method is based on the concept of the successive transmission of stiffness coefficients which are defined as the relationship between the force vector and the displacement vector at an arbitrary nodal line. In order to confirm the validity of the present method, bending vibration analysis for a rectangular plate with stiffener is carried out on a personal computer by using the present method and the finite element method (FEM). Through comparing computational results of the TSCM and the FEM, the effectivness of the TSCM from the viewpoint of computational cost, that is, computational time and storage is demonstrated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1053-1058
• /
• 2003

Piezoelectric under water acoustic transducer is a kind of device for under water detection working as not only an actuator but also a sensor. The technique that can predict acoustical characteristics of transducer is important for robust design of transducer in harsh underwater environment. This paper represents the development of software for analyzing dynamic characteristics of piezoelectric acoustic transducers based on finite element method. Modal and transient analysis modulo for acoustic transducers are developed TWO dimensional model for Tonpilz transducer is used for the test of the developed nodal and transient analysis modules. and comparison is made with a commercial code, ANSYS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.205-209
• /
• 1994

The main purpose of this study is constructing new velocity fields on the base of shape function used in finite element method and showing the possibility of application it to metal forming processes. Utilizing the 8-node quadratic rectangular element, we expressed the velocity within the deformation region by interpolating the velocity of each nodal points. And the upper-bound formulation from this velocity fields was derived. In order to confirm the validity of this method we applied it to axisymmetic combined extrusion problem. the results of load show that this method is on better agreement with experiment than the conventional UBET, and also the flow pattern and profile of extruded part are reasonable.

• Korean Journal of Head & Neck Oncology
• /
• v.3 no.1
• /
• pp.5-13
• /
• 1987

Cancer of the head and neck is an uncommon disease accounting for 5 % of all cancers. In an anatomic area so readily visible and palpable for examination without special and expensive diagnositic tools, it is unfortunate that many patients still present with advanced diseases. Since the prognosis is so intimately related to stage of disease, it is very important to detect the earliest stage of cancer with a complete head and neck examination. In the evaluation of cancer at any anatomic site, the description of the extent of the lesion is important. Not only does proper staging of the tumor lead to make decision of the most appropriate treatment, it also serves as a guide for the results of treatment. Proper staging demands a careful clinical assesment of the extent of the cancer. The current staging system for head and neck cancer uses the TNM system devised by American Joint Committee for Cancer Staging and End Result Reporting. T represent the primary tumor, N, regional nodal metastases, and M, distant metastases. The detection, diagnosis, and appropriate treatment of eary cancer will result in improved survival.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1116-1122
• /
• 2005

A finite element method was used to simulate the wave propagation of laser-generated ultrasound and its interaction with surface breaking cracks in an elastic material. Thermoelastic laser line source on the material surface was approximated as a shear dipole and loaded as nodal forces in the plane-strain finite element (FE) model. The shear dipole- FE model was tested for the generation of ultrasound on the surface with no defect. The model was found to generate the Rayleigh surface wave. The model was then extended to examine the interaction of laser generated ultrasound with surface-breaking cracks of various depths. The crack-scattered waves were monitored to size the crack depth. The proposed model clearly reproduced the experimentally observed features that can be used to characterize the presence of surface-breaking cracks.