• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.10a
• /
• pp.9-18
• /
• 2003

A method for rapid propagation of mature Jack fruit was developed. Four types of explants (mature embryos, apical meristems of young seedlings, apices from mature plants and nodal segments) were used. It has been found 88% of young apical meristems produced shoots in Campbell and Durzan (CD) medium compared to 60% in Murashige and Skoog (MS) medium. Only 1/3 of them produced multiple shoots. Shoot idtiation from nodal segments was very rare. Mature apices produced callus. Although removed of the sheathing cover around mature buds enhanced the shoot initiation but success rate was low in growth regulator free medium. Embryos respond to the CD medium but not to the MS medium. Embryos from seeds soaked in water for 24 hours produced shoots after 8 weeks of incubation and the success rate was 70% while embryos from dry seeds only produced roots. There was no significant effect of cold storage (refrigeration) for 7 days on shoot initiation from mature embryos (65%) but the ability for shoot induction declines with storage time (55% after 21 days of cold storage). Mature axillary buds were established in Modified Campbell and Durzan (CD) medium supplemented with 0.5mg/1 and IBA. There was a significant difference in the growth performance of shoots according to the period of the year in which explants were collected. Highest (60%) was observed in November-January period. It was only 30% when the explants were collected in February-April or May-July and decreased to 20% in August-October. The shoots produced in November-January showed a higher vigor than those produced in other months. Since Jak fruit show seasonal changes in fruit bearing and shedding of leaves, it can be suggested that the difference in growth performances of tissues cultured in artificial culture media would have been affected by endogenous rhythms.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.480-486
• /
• 2021

Magnetoelectric (ME) composite is composed of a piezoelectric material and a magnetostrictive material. Among various ME structures, 2-2 type layered ME composites are anticipated to be used as high-sensitivity magnetic field sensors and energy harvesting devices especially operating at its resonance modes. Rosen type piezoelectric transducer using piezoelectric material is known to amplify a small electrical input voltage to a large electrical output voltage. The output voltage of these Rosen type piezoelectric transducers can be further enhanced by modifying them into ME composite structures. Herein, we fabricated Rosen type ME composites by sandwiching Rosen type PMN-PZT single crystal between two Ni layers and studied their ME coupling. However, the voltage step-up ratio at the resonance frequency was found to be smaller than the value calculated with α_ME value. The ATILA FEA (Finite Elements Analysis) simulation results showed that the position of the nodal point was changed with the presence of a magnetostrictive layer. Thus, while designing a Rosen type ME composite with high performance in a resonant driving situation, it is necessary to optimize the position of the nodal point by optimizing the thickness or length of the magnetostrictive layer.

• Journal of Plant Biotechnology
• /
• v.48 no.4
• /
• pp.255-263
• /
• 2021

Paederia foetida L. is an important medicinal plant that has been used for the treatment of various gastrointestinal related ailments by different tribal communities in India. This plant is also known for its use as a food. Due to overexploitation, P. foetida has been classified as a vulnerable plant in some states of India. The propagation of P. foetida by conventional methods is easy but very slow. Synthetic seed technology offers incredible potential for in vitro propagation of threatened and commercially valuable plants, and can also facilitate the storage and exchange of axenic plant material between laboratories. However, synthetic seed production for P. foetida has not yet been reported. Thus, to the best of our knowledge, the present study is the first attempt to produce synthetic seeds of P. foetida by calcium alginate encapsulation of in vitro regenerated axenic nodal segments. Sodium alginate (3%) and CaCl₂ (100 mM) were found to be the optimal materials for the preparation of ideal synthetic seeds, both in terms of morphology and germination ability. The synthetic seeds showed the best germination (formation of both shoot as well as root; 83.3%) on ½ MS medium augmented with 0.5 mg/L indole-3-acetic acid. The plantlets obtained from these synthetic seeds could be successfully acclimatized under field conditions. We also studied the storage of these synthetic seeds at low temperature and their subsequent sprouting/germination. The seeds showed a germination rate of 63.3% even after 21 days of storage at 4 ℃; thus, they could be useful for transfer and exchange of P. foetida germplasm.

• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.119-131
• /
• 2019

Time dependent creep settlements are one of the most important causes of material deteriorations for the huge water structures such as concrete faced rockfill dams (CFRDs). For this reason, performing creep analyses of CFRDs is vital important for monitoring and evaluating of the future and safety of such dams. In this study, it is observed how changes viscoplastic behaviour of a CFR dam depending the time. Ilısu dam that is the longest concrete faced rockfill dam (1775 m) in the world is selected for the three dimensional (3D) analyses. 3D finite difference model of Ilısu dam is modelled using FLAC3D software based on the finite difference method. Two different special creep material models are considered in the numerical analyses. Wipp-creep viscoplastic material model and burger-creep viscoplastic material model were rarely used for the creep analyses of CFRDs in the last are taken into account for the concrete slab and rockfill materials-foundation, respectively. Moreover, interface elements are defined between the concrete slab-rockfill materials and rockfill materials-foundation to provide interaction condition for 3D model. Firstly, dam and foundation are collapsed under its self-weight and static behaviour of the dam is evaluated for the empty reservoir conditions. Then, reservoir water is modelled considering maximum water level of the dam and time-dependent creep analyses are performed for maximum reservoir condition. In this paper, maximum principal stresses, vertical-horizontal displacements and pore pressures that may occur on the dam body surface during 30 years (from 2017 to 2047) are evaluated in detail. According to numerical analyses, empty and maximum reservoir conditions of Ilısu dam are compared with each other in detail. 4 various nodal points are selected under the concrete slab to better seen viscoplastic behaviour changes of the dam and viscoplastic behaviour differences of these points during 30 years are graphically presented. It is clearly seen that horizontal-vertical displacements and principal stresses for maximum reservoir condition are more than the empty reservoir condition of the dam and significant pore pressures are observed during 30 years for maximum reservoir condition. In addition, horizontal-vertical displacements, principal stresses and pore pressures for 4 nodal points obviously increased until a certain time and changes decreased after this time.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.253-266
• /
• 2021

The sufficient early strength of primary support is crucial for stabilizing the surroundings, especially for the tunnels constructed in soil. This paper introduces the Steel-Concrete Composite Support System (SCCS), a new support with high bearing capacity and flexible, rapid construction. The bearing characteristics and construction performance of SCCS were systematically studied using a three-dimensional numerical model. A sensitivity analysis was also performed. It was found that the stress of a π-shaped steel arch decreased with an increase in the thickness of the wall, and increased linearly with an increase in the rate of stress release. In the horizontal direction of the arch section, the nodal stresses of the crown and the shoulder gradually increased in longitudinally, and in the vertical direction, the nodal stresses gradually decreased from top to bottom. The stress distribution at the waist, however, was opposite to that at the crown and the shoulder. By analyzing the stress of the arch section under different installation gaps, the sectional stress evolution was found to have a step-growth trend at the crown and shoulder. The stress evolution at the waist is more likely to have a two-stage growth trend: a slow growth stage and a fast growth stage. The maximum tensile and compressive stresses of the secondary lining supported by SCCS were reduced on average by 38.0% and 49.0%, respectively, compared with the traditional support. The findings can provide a reference for the supporting technology in tunnels driven in loess.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.59-70
• /
• 2022

Water distribution systems (WDSs) are a representative infrastructure injecting chlorine to disinfect the pathogenic microorganisms and supplying water from sources to consumers. Also, WDSs prescribe to maintain the usual standard (0.1-4.0 mg/L) of residual chlorine. However, the user's usage pattern, water age, network shape, and type affect the hydraulic features (i.e. nodal pressure, pipe velocity) and water quality features (i.e., the residual chlorine concentration). Therefore, this study developed an optimization approach for optimizing WDSs considering water quality-hydraulic factors using Multi-objective Harmony Search (MOHS). The design cost and the system resilience were applied as the design objective functions, and the nodal pressure and the concentration of residual chlorine are used as constraints. The derived optimal designs through this approach were analyzed according to network characteristics such as the network shapes and type. These optimal designs can meet the safety of economic and water quality aspects to increase user acceptance.

• Korean Journal of Head & Neck Oncology
• /
• v.37 no.2
• /
• pp.33-41
• /
• 2021

Background/Objectives: Extra-nodal extension (ENE) is one of the strongest prognosticators in oral cancers. Here we tried to evaluate clinicopathological factors associated with the presence of ENE. Materials & Methods: We retrospectively analyzed clinical information of 120 patients who diagnosed with oral cancer and received curative surgery at our hospital from Mar 2012 to Apr 2020. We comparatively analyzed clinicopathological factors associated with the presence of lymph node (LN) metastasis and ENE, respectively. Results: Variable factors of primary tumor characteristics such as lymphovascular invasion, perineural invasion, largest diameter of tumor, depth of invasion and maximum standardized uptake value were significantly associated with the presence of cervical LN metastasis. The largest diameter of tumor was statistically significant also in multivariate analysis for predicting the LN metastasis. Meanwhile, the association between primary tumor characteristics and the presence of ENE were not statistically significant except the primary tumor size. Importantly, factors associated with LN characteristics including the maximum diameter and number of metastatic LNs were significantly associated with ENE. Conclusion: In this study, several factors affecting cervical LN metastasis and ENE in oral cancer patients were identified. The ENE seems to be influenced by the status of the metastatic LNs, such as the number of metastatic LNs, rather than the characteristics of the primary tumor itself.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.379-395
• /
• 2021

For the complicated structural details in ships and offshore structures, the traditional hotspot stress approaches are known to be sensitive to the element variables of element topologies, sizes, and integration schemes. This motivated to develop a new approach for predicting reasonable hotspot stresses, which is less sensitive to the element variables and easy to be implemented the real marine structures. The three-point bending tests were conducted for the longitudinal attachments with the round and rectangular weld toes. The tests were reproduced in the numerical simulations using the solid and shell element models, and the simulation technique was validated by comparing the experimental stresses with the simulated ones. This paper considered three hotspot stress approaches: the ESM method based on surface stress extrapolation, the Dong's method based on nodal forces along a weld toe, and the proposed method based on nodal forces perpendicular to an imaginary vertical plane at a weld toe. In order to study the element sensitivities of each method, 16 solid element models and 8 shell element models were generated under the bending and tension loads, respectively. The element sensitivity was analyzed in terms of Stress Concentration Factors (SCFs) in viewpoints of two statistical quantities of mean and bias with respect to the reference SCFs. The average SCFs predicted by the proposed method were remarkably in good agreement with the reference SCFs based on the experiments and the ship rules. Negligibly small Coefficients of Variation (CVs) of the SCFs, which is measure of statistical bias, were drawn by the proposed method.

• Journal of Chest Surgery
• /
• v.56 no.5
• /
• pp.336-345
• /
• 2023

Background: The objective of this study was to demonstrate the safety, efficacy, and feasibility of intraoperative monitoring of the recurrent laryngeal nerves during thoracoscopic and robotic 3-field esophagectomy. Methods: This retrospective analysis details our initial experience using intraoperative nerve monitoring (IONM) during minimally invasive 3-field esophagectomy. Data were obtained from a prospectively maintained database and electronic medical records. The study included all patients who underwent minimally invasive (video-assisted thoracic surgery/robotic) transthoracic esophagectomy with neck anastomosis. The patients were divided into those who underwent IONM during the study period and a historical cohort who underwent 3-field esophagectomy without IONM at the same institution. Appropriate statistical tests were used to compare the 2 groups. Results: Twenty-four patients underwent nerve monitoring during minimally invasive 3-field esophagectomy. Of these, 15 patients underwent thoraco-laparoscopic operation, while 9 received a robot-assisted procedure. In the immediate postoperative period, 8 of 24 patients (33.3%) experienced vocal cord paralysis. Relative to a historical cohort from the same institution, who were treated with surgery without nerve monitoring in the preceding 5 years, a 26% reduction was observed in the nerve paralysis rate (p=0.08). On follow-up, 6 of the 8 patients with vocal cord paralysis reported a return to normal vocal function. Additionally, patients who underwent IONM exhibited a higher nodal yield and a decreased frequency of tracheostomy and bronchoscopy. Conclusion: The use of IONM during minimally invasive 3-field esophagectomy is safe and feasible. This technique has the potential to decrease the incidence of recurrent nerve palsy and increase nodal yield.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.193-203
• /
• 1993

A new heuristic method for loading pattern search has been developed to overcome short-comings of the algorithmic approach. To reduce the size of vast solution space, general shuffling rules, a regionwise shuffling method, and a pattern grouping method were introduced. The entropy theory was applied to classify possible loading patterns into groups with similarity between them. The pattern search program was implemented with use of the PROLOG language. A two-group nodal code MEDIUM-2D was used for analysis of power distribution in the core. The above mentioned methodology has been tested to show effectiveness in reducing of solution space down to a few hundred pattern groups. Burnable poison rods were then arranged in each pattern group in accordance with burnable poison distribution rules, which led to further reduction of the solution space to several scores of acceptable pattern groups. The method of maximizing cycle length(MCL) and minimizing power-peaking factor(MPF) were applied to search for specific useful loading patterns from the acceptable pattern groups. Thus, several specific loading patterns that have low power-peaking factor and large cycle length were successfully searched from the selected pattern groups.