• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.6
• /
• pp.133-141
• /
• 2009

The main objective of water distribution system is to supply enough water to users with proper pressure. Hydraulic analysis of water distribution system can be divided into Demand Driven Analysis (DDA) and Pressure Driven Analysis (PDA). Demand-driven analysis can give unrealistic results such as negative pressures in nodes due to the assumption that nodal demands are always satisfied. Pressure-driven analysis which is often used as an alternative requires a Head-Outflow Relationship (HOR) to estimate the amount of possible water supply at a certain level of pressure. However, the lack of data causes difficulty to develop the relationship. In this study, effective supply, which is the possible amount of supply while meeting the pressure requirement in nodes, is proposed to estimate the serviceability and user's convenience of the network. The effective supply is used to calculate Subsystem Importance Index (SII) which indicates the effect of isolating a subsystem on the entire network. Harmony Search, a stochastic search algorithm, is linked with EPANET to maximize the effective supply. The proposed approach is applied in example networks to evaluate the capability of the network when a subsystem is isolated, which can also be utilized to prioritize the rehabilitation order or evaluate reliability of the network.

• Korean Journal of Head & Neck Oncology
• /
• v.15 no.2
• /
• pp.182-188
• /
• 1999

Purpose: To investigate the treatment results' and patterns of failure according to the pathologic type of the parotid malignancy who were treated with radical sugery and postoperative radiation therapy. Materials and Methods: Fifty-two patients with various type of the parotid malignancy, who were treated with combined radical surgery and post-operative irradiation at Yonsei Cancer Center, between 1981 and 1995, were retrospectively reviewed after completion treatment, all but one patients were follow up with the median follow up period of 49 months. Results: We found that pathologically confirmed neck node metastasis rate was 28.8% all case and level II was most common site. Overall failure rate was 26.9%, local recurrence rate was 13.5%, node failure rate was 7.7%, and distant failure rate was 5.8%. Five-year disease free survival rate was 70.9%, and overall survival rate was 73.8%. Recurrence rate was low in adenoid cystic carcinoma and acinic cell carcinoma. However distant metastasis was very high in undifferentiated carcinoma. Local recurrence was main pattern of failure in mucoepidermoid carcinoma and nodal failure was frequently observed in adenocarcinoma. Conclusion: Individualized treatment plan may be required to improve a treatment outcome by pathologic subtype of the parotid malignancy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.468-473
• /
• 2001

Castleman's disease or angiofollicular lymph node hyperplasia, is a rare lymphoproliferative disorder. It may be appear as a local or generalized tumor-like condition, usually in chest or abdomen and may involve both lymph nodes and non-nodal tissues. Castleman's disease is an unusal entity which may at times mimic malignancy but is entirely benign in nature. It is topical as it has been noted to occur with AIDS and Kaposi's sarcoma. Careful interpretation of radiogram may help to distinguish Castleman's disease from other tumor condition, such as lymphoma, neurogenic tumor, or even angiofibroma, etc. But exact diagnosis must be made on the basis of histologic confirmation. In addition to histologic features, clinical distinction between the localized and multicentric form is important in selecting appropriate management. Surgical excision of an localized mass is the first choice of treatment. Partial resection, radiotherapy or observation alone may avoid the need for exessively aggressive therapy. Patients with multicentric disease don't benefit by surgical management because of systemic manifestation and rapid deterioration. Thus, antineoplastic agents and steroids may offer an alternative form of therapy. We report a case of female patient with Castleman's disease in oral and maxillofacial region, treated by surgical excision with good results.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.4
• /
• pp.539-555
• /
• 2015

This study proposes the methodology for measuring the time-distance accessibility on the Seoul bus system based on the T-card transaction databases and analyzes the results. T-card transaction databases contain the time/space information of each passenger's locations and times of the departure, transfers, and destination. We introduce the bus network graph and develop the algorithms for time-distance accessibility measurement. We account the average speed based on each passenger's get-in and getoff information in the T-card data as well as the average transfer time from the trip chain transactions. Employing the modified Floyd APSP algorithm, the shortest time distance between each pair of bus stops has been accounted. The graph-theoretic nodal accessibility has been given by the sum of the inverse time distance to all other nodes on the network. The results and spatial patterns are analyzed. This study is the first attempt to measure the time-distance accessibility for such a large transport network as the Seoul bus system consists of 34,934 bus stops on the 600 bus routes, and each bus route can have different properties in terms of speed limit, number of lanes, and traffic signal systems, and thus has great significance in the accessibility measurement studies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.245-256
• /
• 2000

A moment-curvature relationship to simulate the behavior of reinforced concrete beam under cyclic loading is introduced. Unlike previous moment-curvature models and the layered section approach, the proposed model takes into consideration the bond-slip effect by using monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The advantages of the proposed model, comparing to layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures. The modification of the moment-curvature relation to reflect the fixed-end rotation and pinching effect is also introduced. Finally, correlation studies between analytical results and experimental studies are conducted to establish the validity of the proposed model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.375-387
• /
• 2004

A new finite element model will be presented to analyze the nonlinear behavior of RC beams and slabs strengthened by a patch repair. The numerical approach is based on the p-version degenerate shell element including theory of anisotropic laminated composites, theory of materially and geometrically nonlinear plates. In the nonlinear formulation of this model, the total Lagrangian formulation is adopted with large deflections and moderate rotations being accounted for in the sense of von Karman hypothesis. The material model is based on hardening rule, crushing condition, plate-end debonding strength model and so on. The Gauss-Lobatto numerical quadrature is applied to calculate the stresses at the nodal points instead of Gauss points. The validity of the proposed p-version nonlinear finite element model is demonstrated through the load-deflection curves, the ultimate loads, and the failure modes of RC beams or slabs bonded with steel plates or FRP plates compared with available result of experiment and other numerical methods.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.427-436
• /
• 2006

The objective of this study was to investigate the effects of various occlusal loads on the stress distribution of the buccal cervical region of a normal maxillary second premolar, using a three dimensional fnite element analysis (3D FEA). After 3D FE modeling of maxillary second premolar, a static load of 500N of three load cases was applied. Stress analysis was performed using ANSYS (Swanson Analysis Systems, Inc., Houston, USA). The maximum principal stresses and minimum principal stresses were sampled at thirteen nodal points in the buccal cervical enamel for each four horizontal planes, 1.0 mm above CEJ, 0.5 mm above CEJ, CEJ, 0.5 mm under CEJ. The results were as follows 1. The peak stress was seen at the cervical enamel surface of the mesiobuccal line angle area, asymmetrically. 2. The values of compressive stresses were within the range of the failure stress of enamel. But the values of tensile stresses exceeded the range of the failure stress of enamel. 3. The tensile stresses from the perpendicular load at the buccal incline of palatal cusp may be shown to be the primary etiological factors of the NCCLs.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.2
• /
• pp.115-119
• /
• 1999

The single node cuttings of sweet potato (cv. Mokpo #29) plantlets maintained in vitro were cultured with (MF+) or without membrane filter (MF-) under photomixotrophic (PM), hetrotrophic (HT) and autotrophic (AT) conditions. Shoot length was the greatest (11.9cm) in 3$0^{\circ}C$ (HT) treatment and it was the shortest (3.4 cm) in $25^{\circ}C$ (PM) treatment. Nodal explants cultured in 3$0^{\circ}C$ treatment looked more vigorous than those of $25^{\circ}C$ in appearance, and node number was the greatest (10.5 per plantlet) among the treatments. But plantlets grew in 3$0^{\circ}C$ (HT) treatment were observed all overgrown. The size in leaf area was about 2 times greater and shoot length was about 2 times shorter in PM than in HT condition. Percent dry matter of shoots was 5.9% (HT) and 7.4% (PM) in $25^{\circ}C$ treatment and 6.1% (HT) and 7.4% (PM) in 3$0^{\circ}C$ treatment. Plantlets cultured in the MF+ treatments were less succulent than those cultured in the MF- treatment. Vitrified plantlets were examinated 14.8% (both $25^{\circ}C$ and 3$0^{\circ}C$) in PM condition and 22.2% ($25^{\circ}C$) and 31.5% (3$0^{\circ}C$) in HT condition. Sucrose was necessary for the survival of in vitro plantlets. In the sucrose-free medium, explants cultured in the MF- had turned yellow and were dead after 30 days of culture. But explants cultured in the MF+ were alive and produced plantlets with shoot and root (AT). On the other hand, the survival of explants on the MS basal medium (sucrose-free and hormone-free) depended entirely upon the MF attachment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2005

The purpose of this study was to investigate the distribution of stress within the regenerated bone surrounding the implant using three dimensional finite element stress analysis method. Using ANSYS software revision 6.0 (IronCAD LLC, USA), a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The $5.0{\times}11.5-mm$ screw implant (3i, USA) was used for this study, and was assumed to be 100% osseointegrated. And it was restored with gold crown with resin filling at the central fossa area. The implant was surrounded by the regenerated type IV bone, with 4 mm in width and 7 mm apical to the platform of implant in length. And the regenerated bone was surrounded by type I, type II, and type III bone, respectively. The present study used a fine grid model incorporating elements between 250,820 and 352,494 and nodal points between 47,978 and 67,471. A load of 200N was applied at the 3 points on occlusal surfaces of the restoration, the central fossa, outside point of the central fossa with resin filling into screw hole, and the functional cusp, at a 0 degree angle to the vertical axis of the implant, respectively. The results were as follows: 1. The stress distribution in the regenerated bone-implant interface was highly dependent on both the density of the native bone surrounding the regenerated bone and the loading point. 2. A load of 200N at the buccal cusp produced 5-fold increase in the stress concentration at the neck of the implant and apex of regenerated bone irrespective of surrounding bone density compared to a load of 200N at the central fossa. 3. It was found that stress was more homogeneously distributed along the side of implant when the implant was surrounded by both regenerated bone and native type III bone. In summary, these data indicate that concentration of stress on the implant-regenerated bone interface depends on both the native bone quality surrounding the regenerated bone adjacent to implant and the load direction applied on the prosthesis.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.594-602
• /
• 1998

Titanium hydroxide (TiO({{{{ {OH }_{2 } }})) fine particles were produced by the reverse micelle technique. For the formation of titanium hydroxide (TiO({{{{ {OH }_{2 } }})) particles with the technique reversed micellar solution was prepared by solubilizing water into organic solvent (isooctane) with a surfactant and titanium alkoxide (tetraisopropyl orthotitanate) diluted with isopropyl alcohol was added to the reversed micellar solution. The hdrolyzed species (TiO({{{{ {OH }_{2 } }})) was formed by the hydrolysis of titanium alkoxide and titanium dioxide is then formed by the condensation of the hydrolyzed species. There are several process variables such as surfactants concentration of surface cosurfactant hydrolysis temperature and pH. In this work the ef-fects of process variables on paticle shapes particle size distribution and paticle agglomeration were bi-nodal for an anionic surfactant(AOT) in the whole range of temperature pH and surfactant concentration of this experiment. The addition of ethanol as a cosurfactant resulted in narrow particle size distribution of the experiment. The additiono of ethanol as a cosurfactant resulted in narrow particle size distribution and 0.12${\mu}{\textrm}{m}$ of smaller average particle diameter. FT-IR spectrum of particles shows the absorption peak of Ti-OH bonding and Ti-O bonding. An exothermic peak around 41$0^{\circ}C$ in TGA-DTA curve shows that crys- tallized anatase phase appears and completely transits to anatase around 45$0^{\circ}C$.