• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.475-475
• /
• 2011

현재 수열합성법으로 이용하여 1차원으로 수직 성장한 ZnO 나노와이어는 밴드 갭이 3.37ev로 큰 밴드 갭을 갖는 물질이며 밀도 조절이 매우 어려운 것으로 알려져 있다. ZnO 나노와이어는 기존의 리소그래피 기반을 둔 Top-Down 방식과 달리 자발적인 형성과정으로 높은 결정성을 가지게 되는데, 이는 ZnO 나노와이어가 큰 종횡비 와 전자친화도를 가지고 있어 높은 전계방출 효과를 기대하게 되는 부분이다. 본 연구에서는 실버를 열처리하여 형성된 실버 나노파티클을 마스킹층으로 사용하여 ZnO 나노와어의 밀도 조절을 하고자 하였다. 실버막을 AZO seed layer 기판 위에 증착한뒤 $200{\sim}600^{\circ}C$ 까지 열처리 후 수열합성법을 이용하여 ZnO nanowire를 성장하였다. 또한 전구체인 ZN(NO3)2${\cdot}$6H2O 와 HMT 에 각각 Ammonium chloride와 PEI를 첨가하였고, PEI 의 몰농도를 변화하여 성장된 ZnO 나노와이어의 구조적, 광학적 특성을 평가함으로서 전자소자 적용 가능성을 확인하였다.

• Clean Technology
• /
• v.25 no.1
• /
• pp.74-80
• /
• 2019

Thermochemical treatment of sewage sludge is an energy-intensive process due to its high moisture content. To save the energy consumed during the process, the hydrothermal carbonization process for sewage sludge can be used to convert sewage sludge into clean solid fuel without pre-drying. This study is aimed to investigate co-firing characteristics of the hydrothermally carbonated sewage sludge (HCS) to a pulverized coal combustion system. The purpose of the measurement is to measure the pollutants produced during co-firing and combustion efficiency. The combustion system used in this study is a furnace with a down-firing swirl burner of a $80kW_{th}$ thermal input. Two sub-bituminous coals were used as a main fuel, and co-firing ratio of the sewage sludge was varied from 0% to 10% in a thermal basis. Experimental results show that $NO_x$ is 400 ~ 600 ppm, $SO_x$ is 600 ~ 700 ppm, and CO is less than 100 ppm. Experimental results show that stable combustion was achieved for high co-firing ratio of the HCS. Emission of $NO_x$ and $SO_x$ was decreased for higher co-firing ratio in spite of the higher nitrogen contents in the HCS. In addition, it was found that the pollutant emission is affected significantly by composition of the main fuel, regardless of the co-firing ratios.

• Clean Technology
• /
• v.24 no.4
• /
• pp.323-331
• /
• 2018

The results of an experimental investigation on the co-firing characteristics and slagging behavior of dried and hydrothermal carbonization sewage sludge, sub-bituminous coal, and wood pellet in a fluidized bed were presented. Combustion tests were conducted in a lab-scale bubbling fluidized bed system at the uniform fuel-air equivalence ratio, air flow rate, and initial bed temperature to measure bed temperature distribution and combustion gas composition. 4 different fuel blending cases were prepared by mixing sewage sludge fuels with coal and wood pellet with the ratio of 50 : 50 by the heating value. $NO_x$ was mostly NO than $NO_2$ and measured in the range of 400 to 600 ppm in all cases. $SO_2$ was considered to be affected mostly by the sulfur content of the sewage sludge fuels. The cases of hydrothermal carbonization sewage sludge mixture showed slightly less $SO_2$ emission but higher fuel-N conversion than the dried sewage sludge mixing cases. The result of fly ash composition analysis implied that the sewage sludge fuels would increase the possibility of slagging/fouling considering the contents of alkali species, such as Na, K, P. Between the two different sewage sludge fuels, dried sewage sludge fuel was expected to have the more severe impact on slagging/fouling behavior than hydrothermal carbonization sewage sludge fuel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.929-934
• /
• 2007

In this paper, we enumerate the number of distinct autocorrelation distributions that M-ary Sidel'nikov sequences can have, while we change the primitive element for generating the sequence. Let p be a prime and $M|p^n-1$. For M=2, there is a unique autocorrelation disuibution. If M>2 and $M|p^k+1$ for some k, $1{\leq}k, then the autocorrelatin distribution of M-ary Sidel'nikov sequences is unique. If M>2 and $M{\nmid}p^k+1$ for any k, $1{\leq}k, then the autocorrelation distribution of M-ary Sidel'nikov sequences is less than or equal to ${\phi}(M)/k'(or\;{\phi}(M)/2k')$, where k' is the smallest integer satisfying $M|p^{k'}-1$.

• Korea Journal of Geothermal Energy
• /
• v.7 no.2
• /
• pp.55-65
• /
• 2011

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.292-300
• /
• 1997

In this study PZT powders were prepared with shapes of cubic by hydrothermal synthesis with various starting materials, and the sintering characteristics of the powders were investigated. The particle shapes were cubic regardless of starting materials, but the mean size of particles formed using $Pb(NO_3)_2$, $Ti(OC_4H_9)_4$ and $Zr(OC_4H_9)_4$ was relatively smaller than that of particles prepared from other starting materials. Agitation of the feedstock during hydrothermal reaction results in decreasing the required reaction temperature for the formation of nuclei, and in increasing the size of product particles. XRD results showed that the major phase of PZT crystal powders was a tetragonal phase at the Zr to Ti ratio of 40 to 60, or a rhombohedral phase at its ratio of 60 to 40. The density of a sintered body made from the hydrothermal powders in PbO surrounding varied with sintering temperatures and with periods of sintering time. The experimental results also showed that the optimum sintering condition was at $1150^{\circ}C$ for a 2hr sintering, and that the density of a sintered body was $7.6g/cm^3$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.35.1-35.1
• /
• 2011

수열합성법으로 제작된 ZnO 나노와이어는 저온 MBE (Molecular Beam Epitaxy) 방식과 달리 Ti, Au와 같은 촉매로 부터 성장이 끝난뒤 나노와이어 끝에 남는 촉매를 제거해야할 필요가 없으며, 저온에서 합성이 가능하기 때문에 현재 연구가 많이 되고 있는 방법중에 하나이다. 본 연구에서는 수열 합성법을 이용하여 금속촉매 또는 AZO로 seed를 형성한 후 기판 위에 균일한 크기의 ZnO 나노막대를 성장시키고 성장밀도 및 길이의 간편한 제어를 하였다. 이를 위해 계면활성제인 PEI (Polyethyleneimine) 첨가 및 Chloride ($Cl_-$)를 조절하여 ZnO 나노와어의 성장밀도를 조절 하고자 하였다. 실험방법으로는 전구체인 Zn(NO3)2${\cdot}$6H2O와 HMT에 Chloride 계열인 Ammonium chloride 와 Kcl 의 몰농도를 각각 조절하고 PEI를 첨가하여, ZnO 나노와이어를 성장하였다. 성장된 ZnO 나노와이어의 특성을 평가하기 위해 field emission scanning electron microscopy (FE-SEM)을 이용하여 광학적인 특성을 측정하였으며, 결정성을 조사하기 위해 X-ray diffraction (XRD)을 이용하여 분석하였다. 또한 scanning PL 장비를 통해 photoluminescence양을 측정하고 ZnO 나노와이어의 응용 가능성을 평가하였다.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.53-59
• /
• 2006

.FAPO-5 molecular sieves were synthesized starting from the same reactant gel at 170 oC using microwave irradiation technique and conventional hydrothermal reaction. The FAPO-5 molecular sieves were characterized by several techniques such as SEM, FTIR, UV/Vis, and ESR. Moreover, the oxidation of styrene over FAPO-5s was carried out, and compared to check the oxidation and epoxidation ability of the two FAPO-5s. FAPO-5 can be obtained easily by microwave irradiation within 15 min at 170oC, whereas FAPO-5 synthesis is completed in 6 h by conventional electric heating, confirming the acceleration about 20 times by microwave technique. There are no appreciable differences between two FAPO-5s in surface area and coordination state of iron. The FAPO-5 synthesized by microwave irradiation shows higher epoxide selectivity in the styrene epoxidation, which may be explained by the higher hydrophobicity of the catalyst.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.683-689
• /
• 2003

The cylindrical ${\gamma}$-alumina pellets were prepared using amorphous alumina and pore generating agent. Its were immersed in aqueous solution of the mixture of Fe(NO$_3$)$_3$.9$H_2O$ and $CH_3$COOH, Fe(NO$_3$)$_3$.9$H_2O$ and $CH_3$COOH and HNO$_3$, and Fe(NO$_3$)$_3$.9$H_2O$ and HNO$_3$. The pellets thus were hydrothermally treated at 20$0^{\circ}C$ for 3 h in autoclave, and were investigated morphologies and changes of crystal pore characteristics, $N_2$ adsorption and desorption isotherms, active sites and mechanical strength etc. According to the preparation method, acicular platelet pseudo-boehmite crystals of 0.1~0.3 ${\mu}{\textrm}{m}$ size were transformed into acicular pseudo-boehmite cristals of 0.5~2 ${\mu}{\textrm}{m}$ size having the same crystal structure. When ${\gamma}$-alumina pellets were immersed in aqueous solution of the mixture of Fe(NO$_3$)$_3$.9$H_2O$ and $CH_3$COOH and then were hydrothermally treated, pore volume between 100 $\AA$ and 1000 $\AA$ was increased from 0.34 ㏄/g to 0.86 ㏄/g, and the gap of $N_2$ adsorption and desorption hysteresis loop was decreased due to increasement of pore size. New active site that could adsorb the C-H functional group was created on the catalist. Also, mechanical strength of catalyst was increased from 1.06 ㎫ to 1.36 ㎫.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.226-233
• /
• 2007

In this paper, we construct new LCZ sequence sets with parameters $(2^{n+1}-2,M,L,2)$. In this scheme, we can relatively freely choose the LCZ length L and the resulting LCZ sequence set has the size in which is nearly optimal with respect to Tang, Fan, and Matsufuji bound.