• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1993

A design of four-mirror optical system with reduction magnification 5X for deep UV ($\lambda$=248 nm of KrF excimer laser) submicron lithography is presented. Initially by using the paraxial quantities, the domain of solution for $t=d_1+d_2+d_3$<0 (d;: distance between the mirror $c_i$ and $c_{i+1}$ is found for the system which is free from the four off-axial Seidel first order aberrations that are coma, astigmatism, field curvature, and distortion. The solution with $d_5$=2.95 (normalized with respect to $c_i$= -1) is choosen and the aspherization is carried out to the spherical mirror surfaces ($c_3$ and $c_4$ in order to reduce the axial and residual off-axial higher order aberrations. The numerical aperture of the final system is as large as 0.4, which gives Rayleigh resolution of 0.38 $\mu\textrm{m}$.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.70-77
• /
• 2006

Stress drops of Brune's single-corner ${\omega}^2$ source model were estimated for the earthquakes (2.0$M3.5{\sim}4.0$ and increase up to $M4.5{\sim}5.0$ above which the level of the stress drop could be assumed to be flat or decrease according to whether the rupture process accompanies buried fault or surface rupturing. The converted data of corner frequency and seismic moment were nicely fitted to the relation of $M_0{\propto}f^3$ but show systematically higher corner frequencies for $M_0>10^15$ Nm. This relationship enables systematic evaluation of a scaling relation between magnitude and stress drop. The inverted level of the stress drop is comparable to the recent studies conducted domestic and abroad. A result of lower stress drop estimated by Jun(1991) is supposed to be due to the use of low frequency spectra and existence of two-comer source model around the Korean Peninsula.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.3
• /
• pp.174-183
• /
• 2008

In order to develop the substitutive materials for natural baits of swimming crab pots, the fluorescent characteristics of the baits were analyzed, and the preference of fluorescent dyes were investigated by the mean entrapped catch number to the pots through the water tank experiments and fishing experiments. On the investigation of fluorescent characteristics by the 5 kinds of baits, mackerel, krill, manila clam, pig's fat and chicken's head which were used in substitutive baits for test in the UV long wave(365nm) area, it showed clear blue fluorescence in the skin of mackerel, shell of krill, manila clam and bill of chicken's head, and green fluorescence in the mackerel s muscle and internals, and yellow fluorescence in the pig's fat and chicken's head. On the investigation of fluorescent characteristics by the bait cages in the UV short wave(254nm) and long wave(365nm) area, it showed each green, red and blue fluorescence in the cylinderical or hexahedral red plastic bait cages which were painted each green, red and blue fluorescence dyes, but it showed yellowish green flourescence in the cylinderical or hexahedral red plastic bait cage which was painted yellow fluorescent dye. On the preference investigation of the fluorescent dyes of swimming crabs by the 5 kinds of the bait cages which were put the mackerel in the non-fluorescent red plastic cage($RF_N$), red, yellow, green and blue fluorescent plastic cages(RF, YF, GF, BF) each, nonfluorescent red plastic cage($RF_N$) was entrapped mean 2.0(6.7%), but blue fluorescent plastic cage(BF) was mean 5.0(16.7%) and it was more 2.5 times comparing to $RF_N$, and red fluorescent cage(RF) was same level and green fluorescent cage(GF) was 50% of catch number comparing to $RF_N$, and yellow fluorescent cage(YF) was entrapped nothing(F 46.324, P < 0.05). On the investigation of the entrapped catch number to the pots which were put the mackerel in the blue fluorescent hexahedral plastic cage(HP) and blue fluorescent silicon mackerel model cage(SM), HP was mean 3.4(11.3%) and it was a little more comparing to SM which was entrapped mean 3.2(10.7%)(t 0.775, P > 0.05). Fishing experiments on the preference investigation of swimming crabs by the pots which were put in the non-fluorescent red plastic cage($RF_N$) and blue fluorescent plastic cage(BF) were conducted 3 times. Mean catching number and weight of $RF_N$ were 71.7 ind.(18.3%) and 16.9kg(64.3%), and those of BF were 93.0 ind.(23.1%) and 19.8kg(64.5%), respectively.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.459-465
• /
• 1994

A-axis oriened YBCO thin flims were grown on $LaAIO_{3}$ single crystal substrate by off-axis rf magnetron sputtering method. We used two kinds of process to get a-axis oriented fi1ms;one-step process and two-step process. In one-step process, films are grown in single step in which substrate temperature( $T_s$) is in the range of $590^{\circ}C$ to $680^{\circ}C$. On the other hand, in two step process a-axis oriented thin film templates i f about 30nm thickness is deposited at low temperature first, and subsequently films are grown at elevated temperature to the final thickness of about 100nm. In the case of one step process($T_s$ ~)$600^{\circ}C$), prefered a-axis orientation is dominant and Cu-rich phases segregate at the surface. Segregations decrease and ($00 \ell$) peaks increase upon increasing $T_s$. The films prepared by two step method appeared to have strong(h00) peaks as the deposition rate increased. Microstructure shows pin holes resulted from mixed phases of a-axis and c-axis oriented films. In both cases of one step and two step process, as TS decreases, prepared films show stronger a-axis orientation. However electrical properties of the films are depressed with lower $T_c$ and wider $\Delta T$ as $T_s$ decreases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.171-171
• /
• 2013

2층 FCCL (연성회로기판, Flexible Copper Clad Laminate)에 있어서 폴리이미드 필름과 구리의 접착력을 향상 시키기 위해 기존에 사용되고 있는 Ni-Cr대신 박리강도가 높고 에칭성도 매우 뛰어난 Ni-Mo-Nb 박막을 Roll-to roll 스퍼터 장비를 이용하여 개발하였다. 새롭게 개발된 Ni-Mo-Nb 박막은 기존 연구되어진 Ni-Cr 물질 대비 고온 박리강도 약 1.5~2.0배, 에칭성 8배 이상의 매우 우수한 특성을 보였다. Ni-Mo-Nb 접착층의 두께가 7~40 nm로 증가함에 따라 상온 박리강도가 향상 되는 것을 확인하였다. Ni-Mo-Nb 박막을 증착 하기 전 폴리이미드 기판표면을 RF 플라즈마 전처리 하였을 때 0.67 kg f/cm의 우수한 상온 박리강도를 나타내었으며 FCCL 샘플을 $150^{\circ}C$에서 168시간동안 열처리 한 후 접착력을 측정하였을 때도 0.54 kg f/cm의 높은 고온 박리강도를 보였다. FCCL의 박리강도, 표면 거칠기, 원소들의 화학적 결합, 박막의 미세구조를 peel test, atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy를 이용하여 폴리이미드 기판 플라즈마 전처리 효과를 확인하였다. 그 결과 플라즈마 전처리를 한 폴리이미드 기판의 경우 처리하지 않은 기판보다 상온과 고온에서 더 우수한 접착력을 가지는 것을 확인 할 수 있었는데 이것은 폴리이미드 기판의 표면 거칠기 증가에 의한 mechanical interlocking effect가 아닌 전처리를 통한 폴리이미드 표면 개질로 C-0, C-N와 같은 chemical functional group이 증가했기 때문인 것으로 확인되었다.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.741-746
• /
• 2019

New triple tungstate phosphors NaPbLa(WO₄)₃:Yb³⁺/Ho³⁺ (x = Yb³⁺/Ho³⁺ = 7, 8, 9, 10) are successfully fabricated by microwave assisted sol-gel synthesis and their structural and frequency upconversion (UC) characteristics are investigated. The compounds crystallized in the tetragonal space group I4₁/a and the NaPbLa(WO₄)₃ host have unit cell parameters a = 5.3927(1) and c = 11.7961(3) Å, V = 343.05(2) ų, Z = 4. Under excitation at 980 nm, the phosphors have yellowish green emissions, which are derived from the intense ⁵S₂/⁵F₄→⁵I₈ transitions of Ho³⁺ ions in the green spectral range and strong ⁵F₅→⁵I₈ transitions in the red spectral range. The optimal Yb³⁺:Ho³⁺ ratio is revealed to be x = 9, which is attributed to the quenching effect of Ho³⁺ ions, as indicated by the composition dependence. The UC characteristics are evaluated in detail under consideration of the pump power dependence and Commission Internationale de L'Eclairage chromaticity. The spectroscopic features of Raman spectra are discussed in terms of the superposition of Ho³⁺ luminescence and vibrational lines. The possibility of controlling the spectral distribution of UC luminescence by the chemical content of tungstate hosts is demonstrated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.33-39
• /
• 2008

We have experimentally demonstrated the transmission performance of a feedforward optical transmitter using an external light injection technique. The feedforward compensation method shows 31 dB intermodulation distortion suppression and 2.2 dB noise reduction. A high side-mode suppression ratio exceeding 35 dB of the wavelength of the locked Fabry-Perot laser diode was obtained over 12 nm ranges. The suppression characteristics of the intermodulation distortion for various wavelength differences and transmission lengths were measured and analyzed as the evaluation criteria for the system performance in WDM/SCM based radio-over-fiber systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.542-545
• /
• 2002

High performance organic electroluminescnet(EL) devices which are composed of organic thin multilayer films are fabricated. The basic structure is ITO/Emitting layer/LiF/Al in which have a blended emitting layer. The emitting layer is consisted of a host material(N,N' diphenyl-N,N' (3-methyl phenyl)-l,l'-biphenyl-4,4'diamine)(TPD)) and a guest emitting material(poly(3-hexylthiophehe)(P3HT)). We think that the energy transfer in blending layer occurred from TPD to P3HT. Red emitting multilayer EL devices were fabricated using tris(8-hydroxyqunolinate) aluminum$(Alq_3)$ as electron transport material. The device structure of ITO/blending layer(TPD+P3HT)$/Alq_3$/LiF/Al was employed. In the Voltage-current-luminance characteristics of multilayer device, the device tum on at the 2V and the luminance of $10{\mu}W/cm^2$ obtain at l0V. Red emission peak at 640nm was observed with this device structure. We have presented evidence that the excitation energy migration between a polymeric host and guest has to be explained. And by using multilayer, the red light emitting EL device enhances not only Voltage-current-luminance characteristic but also stability of device.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.633-644
• /
• 2020

Rice paper is an element of Vietnamese cuisine that can be used to wrap vegetables and meat. Rice and starch are the main ingredients of rice paper and their mixing ratio is important for quality control. In a commercial factory, assessment of food safety and quantitative supply is a challenging issue. A rapid and non-destructive monitoring system is therefore necessary in commercial production systems to ensure the food safety of rice and starch flour for the rice paper wrap. In this study, fluorescence hyperspectral imaging technology was applied to classify grain flours. Using the 3D hyper cube of fluorescence hyperspectral imaging (fHSI, 420 - 730 nm), spectral and spatial data and chemometric methods were applied to detect and classify flours. Eight flours (rice: 4, starch: 4) were prepared and hyperspectral images were acquired in a 5 (L) × 5 (W) × 1.5 (H) cm container. Linear discriminant analysis (LDA), partial least square discriminant analysis (PLSDA), support vector machine (SVM), classification and regression tree (CART), and random forest (RF) with a few preprocessing methods (multivariate scatter correction [MSC], 1^st and 2^nd derivative and moving average) were applied to classify grain flours and the accuracy was compared using a confusion matrix (accuracy and kappa coefficient). LDA with moving average showed the highest accuracy at A = 0.9362 (K = 0.9270). 1D convolutional neural network (CNN) demonstrated a classification result of A = 0.94 and showed improved classification results between mimyeon flour (MF)1 and MF2 of 0.72 and 0.87, respectively. In this study, the potential of non-destructive detection and classification of grain flours using fHSI technology and machine learning methods was demonstrated.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.422-428
• /
• 2000

Optimum analytical conditions of the aluminium ion were established by flow injection analysis. Eriochrome Cyanine R(ECR) dye reacts with the aluminium ion at pH 6.0 to form a complex that exhibits maximum absorption at 535 nm. Reaction conditions including the mixing and the reaction coil length, the concentration and the pH of the buffer solutio, temperature, and injection loop volume were optimized to intro-duce this reaction into flow injection analysis. The results were as follows. A mixing coil length of 0.5 m and a reaction coil length of 4.0 m, the pH 6.0 and 1M of acetate buffer solution, the ECR concentration of 0.56 mM, the reaction temperature of 40$^{\circ}C$, the injection loop volume of 300${\mu}L$ were chosen as optimum conditions. Under these conditions the detection limit of the aluminiumion was less than 0.05 mg/L and the repeatability was better than 1%. A sampling frequency of 24 times for an hour was achieved. Interfering ions such as $F^-$, HP$O_4^{2-}$, $Fe^{2+}$, $Fe^{3+}$, $Mn^{2+}$, and other anions were tested, interference did not occur up to 1,000mg/L of ion concentration and up to 2,CO0mg/L of sulfate ion con-centration. This method was applied for the determination of aluminium ion in tap water and ground water of Jeonju and the Gochang area. The results showed that the aluminium residual in tap water of the Jeonju area was at a mean of 0.478mg/L and that in tap water of the Gochang area was at a mean of 0.278mg/L. Aluminium ion residual of the tap waters in the Jeonju area was higher level than that in the Gochang area. Aluminium residual in the ground water of the Jeonju area was 0.386 mg/L and was lower compared to 0.564 mg/L for the Gochang area.