• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.4
• /
• pp.290-296
• /
• 2016

Green manure has been used as alternative to chemical fertilizer. To evaluate the effect of green manure on the chemical properties of top-soil and sorghum yield, hairy vetch (Vicia villosa Roth, HV), manure barley (MB), and a mixture of hairy vetch and manure barley (HV+MB) were incorporated into the soil at a rate of $100kg-N\;N\;ha-1$ before the sorghum was transplanted. Total biomass of sorghum grown in the HV, MB, and HV+MB treatments was 13.1, 31.6, and $25.2t\;ha^{-1}$, respectively, and the nitrogen production of the treatments was 81, 74, and $145kg\;ha^{-1}$, respectively. The SPAD value of the uppermost leaf of sorghum plants grown in the soils with HV, MB, or HV+MB were very similar until heading stage; however, at maturity, the SPAD value of sorghum cultivated in the soils with HV was lower than that of sorghum in the soils with MB or HV+MB. This could be because the nitrogen release from HV was too rapid to supply nitrogen to sorghum during the later stage of grain filling. Compared with chemical fertilizers, the incorporation of green manure increased the pH, exchangeable cations ($K^+$, $Mg{^{+}^{+}}$, and $Ca{^{+}^{+}}$), and total nitrogen in soil postharvest, indicating an improvement in soil chemical properties. Total carbon content increased in soil with green manure incorporated, but decreased in the chemical fertilized soil, suggesting that sorghum cultivation using green manure may sequester carbon in soils. The yield of sorghum cultivated with green manure was not different from the yield of sorghum cultivated with chemical fertilizers. These results suggest that the mixture of hairy vetch and manure barley can be a useful chemical fertilizer alternative in sorghum cultivation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.119-123
• /
• 2011

To use barley as a green manure crop, this study has been conducted in Suwon, Gyeonggi-do to establish the barley green manure (BGM)-rice cropping system with emphasis on soil incorporation date and BGM density. The nitrogen (N) contents of rye and barley, grass green manure crops, were 1.4~2.4% at early growth stage and decreased rapidly to 0.6~1.0% at late growth stage. The biomass of barley was 449 kg/l0a at heading stage (HS) and increased to 421 kg/10a at 10 days after heading stage (DAH), 473 kg/10a at 20 DAH. C/N ratio of BGM was the lowest 26.3 at HS. The N contents of BGM was in the range of 0.9~1.5%, the highest at HS and gradually decreased, and the output of N were 4.3-6.3 kg/10a. The total amount of nitrogen, phosphorous and potassium of BGM showed the highest level at 10 DAH. Culm length of rice was relatively longer as the BGM application time was delayed. The application of BGM into soil increased plant height of rice by 7.2~7.7 em as compared to the plants treated with commercial fertilizer at recommended rate. but panicle length of rice showed a similar tendency in both the soil-applied of BGM and commercial fertilizer. N contents of unhulled rice was the highest at HS of BGM and followed by 10 DAH of BGM and 20 DAH of BGM. This trend could also be seen in rice straw. The yield of rice in the soil-applied of BGM was 10~15% lower than in the soil-applied of commercial fertilizer. Based on this study, application of BGM made it possible to save 30~50% of application amount of nitrogen fertilizer for following crops.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.178-185
• /
• 2007

Intermediate pentasil borosilicate zeolite-like materials have been crystallized by a novel method named steam-assisted conversion, which involves vapor-phase transport of water. Indeed, amorphous powders obtained by drying Na2O.SiO2.B2O3.TBA2O gels of various compositions using different boron sources are transformed into crystalline borosilicate zeolite belonging to pentasil family structure by contact with vapors of water under hydrothermal conditions. Using a variant of this method, a new material which has an intermediate structure of MFI/MEL in the ratio 90:10 was crystallized. The results show that steam and sufficiently high pH in the reacting hydrous solid are necessary for the crystallization to proceed. Characterization of the products shows some specific structural aspects which may have its unique catalytic properties. X-ray diffraction patterns of these microporous crystalline borosilicates are subjected to investigation, then, it is shown that the product structure has good crystallinity and is interpreted in terms of regular stacking of pentasil layers correlated by inversion centers (MFI structure) but interrupted by faults consisting of mirror-related layers (MEL structure). The products are also characterized by nitrogen adsorption at 77 K that shows higher microporous volume (0.160 cc/g) than that of pure MFI phase (0.119 cc/g). The obtained materials revealed high surface area (~600 m2/g). The infrared spectrum reveals the presence of an absorption band at 900.75 cm-1 indicating the incorporation of boron in tetrahedral sites in the silicate matrix of the crystalline phase.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.376-385
• /
• 2008

Twenty lactating crossbred cows yielding 10 to 15 litres of milk daily during mid lactation were selected and divided into four groups of five animals to assess the effect of feeding calcium soaps of palm oil fatty acids (bypass fat) on milk yield, milk composition and nutrient utilization in lactating crossbred cows. The animals in groups 1 (control), 2, 3 and 4 were fed concentrate mixture containing 0 (no bypass fat), 2, 4 and 6% bypass fat, respectively. The average daily dry matter consumption in the various groups ranged from 13.1 to 13.6 kg and showed no significant difference among treatment groups. There was no significant difference among different groups in digestibility of DM, OM, CP and CF, however, ether extract digestibility in cows of groups 2 and 4 was significantly (p<0.05) higher than the control group. The average milk yields of the cows in group 3 (4% bypass fat) showed a significantly (p<0.05) higher value than cows of groups 1 and 2. Similarly, a significant (p<0.05) increase in fat yield, 4% FCM yield and SNF yield was observed for the cows in group 3 (4% bypass fat). The milk composition in terms of total solids, fat, lactose, protein, solids-not-fat and ash percentage showed a varying response and bypass fat feeding did not have any effect on milk composition of cows in different groups. The gross and net energetic efficiency of milk production ranged from 23.6 to 27.5% and 37.1 to 44.4%, respectively, and showed no significant difference among different treatment groups. The gross and net efficiency of nitrogen utilization for milk production ranged from 24.0 to 28.7% and 37.2 to 43.5%, respectively, and no significant difference was noted among different treatment groups. The supplementation with calcium salts of palm oil fatty acid reduced the proportion of caproic, caprylic and capric acids and significantly (p<0.01) increased the concentration of palmitic, oleic, stearic, linoleic and linolenic acids in milk fat with increase in level of bypass fat supplementation. It was concluded that incorporation of calcium salts of palm oil fatty acids at a 4% level in the concentrate mixture of lactating crossbred cows improved the milk production and milk quality in terms of polyunsaturated fatty acids without affecting the digestibility of nutrients.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.63-74
• /
• 1994

The ultrathin oxide films less than 100$\AA$ were grown by thermal oxidation in $N_2O$ ambient to improve the controllability of thickness, thickness uniformity, process reproducibility and their electrical properties. Oxidation rate was reduced significantly at very thin region due to the formation of oxynitride layer in $N_2O$ ambient and moreover nitridation of the oxide layer was simultaneously accompanied during growth. The nitrogen incorporation in the grown oxide layer was characterized with the wet chemical etch-rate and ESCA analysis of the grown oxide layer. All the oxides thin films grown in $N_2O$, pure and dilute $O_2$ ambients show Fowler-Nordheim electrical conduction. The electrical characteristics of thin oxide films grown in $N_2O$ such as leakage current, electrical breakdown, interface trap density generation due to the injected electron and reliability were better than those in pure or dilute ambient. These improved properties can be explained by the fact that the weak Si-0 bond is reduced by stress relaxation during oxidation and replacement by strong Si-N bond, and thus the trap sites are reduced.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.1
• /
• pp.43-50
• /
• 1995

This study was carried out to investigate the effects of activated carbon (AC) on growth, ruminal charateristics, blood profiles and feed digestibility in sheep, using roughage-based or concentrate-based diets. Twelve Suffolk breed of sheep of similar age and weight were distributed into 4 groups in a $2{\times}2$ factorial design. Two groups were fed a roughage-based diet with (R + AC) and without AC (R - AC), while the other two were fed a concentrate-based diet with (C + AC) and without AC (C - AC), respectively. The addition of 0.3% AC was based on dry matter of feed offered to animals. The incorporation of AC in roughage and concentrate based diets had no marked effects on feed intake, daily gain and feed conversion of the animals within experimental diets. The results obtained might be due to the low level of AC added in the diet. The animal on both concentrate-based diets were higher than the roughage-based diets in terms of daily gain and feed conversion ratio. However, it was observed that the animals provided with AC in the concentrate-based diet did not suffer from diarrhea and easily adjusted to high concentrate feeding. Further, the pH value for all diets before feeding was noted to be similar. After feeding, however, pH was shown to be higher in R + AC (p < 0.05) than in C + AC diet. Rumen protozoa number was decreased after feeding for both + AC diets, but in C - AC diet it was higher than in the roughage-based diets. For ammonia-nitrogen, C - AC was found to be higher than C + AC diet and the roughage-based diets before feeding. Total volatile fatty acid concentration, propionate and valerate molar ratios for both diets and time of collection were not affected. However, acetate, butyrate and valerate molar ratios were observed to be affected by diets and time of collections. The diets with AC increased (p < 0.05) before feeding for acetate molar ratio, but not different within diet, however, the roughage diets were found to be higher (p < 0.05) in acetate than the concentrate diet. In the blood parameters, the glutamic pyruvic transaminase (GPT), red and white blood cell (RBC, WBC) counts and packed cell volume (PCV) did not differ within and among the diets. Likewise, the WBC differential count in both diets with either - AC or + AC were similar in trend. However, lymphocyte count was noted to be increased in R + AC than the R - AC diet. The addition of AC in both diets did not affect nutrient digestibilities within diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.1
• /
• pp.29-35
• /
• 2003

In order to find the feasibility of feeding raw or processed cotton (Gossypium) seed meal (CSM), 30 male crossbred lambs were randomly assigned to 5 dietary treatments with 6 animals each. Lambs were fed each of the isonitrogenous and isocaloric concentrate mixtures containing 30% deoiled groundnut cake (DGNC) (reference diet), 40% raw, 45 minute cooked, 1% $Ca(OH)_2$ or iron (1 part free gossypol:0.3 parts iron) treated CSM (replacing about 50% nitrogen moiety of reference concentrate mixture). The concentrate mixture was fed to meet 80% of CP requirements (NRC, 1985) along with ad libitum maize (Zea mays) hay for 180 days. Incorporation of raw or processed CSM did not affect the palatability of diets as evidenced by higher (p<0.01) or comparable overall daily intakes of DM and protein (CP and Digestible CP) per kg $W^{0.75}$ by lambs in comparison to reference group. Intakes of DE and ME increased (p<0.01) due to inclusion $Ca(OH)_2$ treated CSM in diets, while the intakes were lower (p<0.01) on iron treated CSM based diet when compared with reference diet. The intakes of DM, CP, TDN, DE and ME by reference and experimental lambs were higher than the requirements stipulated by NRC (1985). The growth rate was highest (p<0.01) in lambs fed on diets with cooked CSM followed by those fed raw or $Ca(OH)_2$ treated CSM based diets. The growth of lambs fed on iron treated CSM diets was depressed (p<0.01) in comparison to that of other experimental lambs probably due to increased iron intake (889 mg/kg DM of diet) which was much higher than the toxic levels of 500 ppm (NRC, 1980). The lambs on various diets utilized DM with similar efficiency while the utilization of energy (TDN, DE and ME) was more efficient (p<0.01) when the diets contained raw or cooked CSM in comparison to that of reference diet. The lambs fed raw and $Ca(OH)_2$ treated CSM incorporated diets utilized DCP with higher (p<0.01) efficiency than the lambs fed reference diet. The feed cost per kg weight gain was lower (p<0.01) on raw, cooked and $Ca(OH)_2$ treated CSM based diets in comparison to reference diet. Cooking of CSM for 45 minutes further reduced the feed cost of weight gain.

• Clean Technology
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2020

Ti-SBA-15 catalysts doped with lanthanide ions (Ln/Ti-SBA-15) were successfully synthesized using conventional hydrothermal method. In addition, they were characterized by XRD, FT-IR, DRS, BET, and PL. The activity of these materials on the photocatalytic decomposition of methylene blue under ultraviolet light irradiation was also examined. Ti-SBA-15 catalysts doped with various lanthanide ions maintained their mesoporous structure. The pore size and pore volume of Ln/Ti-SBA-15 materials decreased but their surface area increased upon the doping of lanthanide ion. Ln/Ti-SBA-15 materials exhibited the type IV nitrogen isotherm with desorption hysteresis loop type H2, which was characteristic of mesoporous materials. The size of hysteresis increased in the doping of lanthanide ions on Ti-SBA-15 material. There was no absorption in the visible region (> 400 nm) regardless of the doping of lanthanide ions to TiO₂ particles, while the broad bands at 220 nm appeared at the Ln/Ti-SBA-15 samples, indicating the framework incorporation of titanium into SBA-15. 1 mol% Pr/ Ti-SBA-15 catalysts showed the highest photocatalytic activity on the decomposition of methylene blue but the Ti-SBA-15 catalysts doped with Eu, Er, and Nd ions showed lower activity compared to pure Ti-SBA-15 catalyst. The PL peaks appeared at about 410 nm at all catalysts while the excitonic PL signal was proportional to the photocatalytic activity for the decomposition of methylene blue.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.4
• /
• pp.451-458
• /
• 1984

The effects of branched chain amino acids added to a diet on changes in the body weight with or without liver, moist and dry liver weight, protein, DNA, $^3H-thymidine$ incorporation into DNA, ana mitotic index of regenerating liver were studied in partial hepatectomized rat. Experimental diet was a 14.63% casein diet supplemented with 1.49% L-leucine, 0.90% L-isoleucine and 0.98% L-Valine, and control diet was an 18.0% casein. In both diets, 2.54% nitrogen were included. Rats fed experimental diet were significantly increased body weight with or without liver 7 days, and regenerated weight of dry liver and an index of liver regeneration 5 days after partial hepatectomy. Mitotic index, contents of protein and DNA increased in regenerating liver after partial hepatectomy was higher in experimental diet group. This results suggest that branched chain amino acids have an benefitial effect on whole body as well as liver regeneration after partial hepatectomy in rat.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.110-118
• /
• 1992

When CVD-W films deposited on the reactively sputter-deposited TiN(${\circled1}$), the $NH_3$-RTP (rapid themal processed) TiN(${\circled2}$), and the furnace-annealed TiN submitate (${\circled3}$) by $SiH_4$, reduction, deposition rate is in the order of ${\circled1}>{\circled2}>{\circled3}$ and incubation period of W nucleation is in the order of ${\circled1}{\leq}{\circled2}<{\circled3}$. The longest incubation period of nucleation and lowest deposition rate for the CVD-W on the annealed TiN is due to the incorporation of oxygen from the nitrogen ambient containing some oxygen as contaminant into the TiN film. The higher W deposition rate and the lower incubation period of W nucleation on the RTP-TiN substrate in comparison with those on the sputtered TiN substrate seem to be due to a negative effect of the high compressive stress of the RTP-TiN on the nucleation and growth of W. Also the thickness uniformity of the W film deposited on the TiN substrate by $SiH_4$ reduction turns out to be better than that by $H_2$ reduction.